开云体育

Thanks Richard, I guess that the week-end stopped other guruhs from responding. Since Richard's mail the following has happened: checked ground lead for -12.6V heater supply, also connected earth side

Have recently acquired a going 5328A counter.It has the HPIB option which I will never use.If anyone is interested in the PCB (cost of shipping ex New Zealand!) let me know. Peter

Ok, thanks for the info!. What is in the 'accessory kit'? It has probes, adapters, and such things as I remember. Could I get an 8505A for less than US$300 ??? Regards, JOSE Maybe. You would have to

Subject: [BOATANCHORS-TEMPE] Transformer ID From: Robert Lawson W4Rl <w4rl@...> Date: Sun, January 14, 2007 6:18 pm To: BOATANCHORS@... Hello to all, I have 'inherited' the

Anybody have knowledge of these sig gens? Older model has computer keyboard type keys/red LED display and new model looks like the 8657A with green LED display and soft rubber keys. Are there

wrote: Jim

Well, if thoose manuals comes from the people that sells manuals, that should not be a problem i would have thought. With best regards With best regards Tomas Larsson Sweden http://www.tlec.se

Hi all Members in all Groups. Since BAMA is scaling down, I have decided to take over from where BAMA ended. I have created a new domain, called www.ebaman.com, (Electronic Boat Anchor Archives for

Hi all Members in all Groups. Since BAMA is scaling down, I have decided to take over from where BAMA ended. I have created a new domain, called www.ebaman.com, (Electronic Boat Anchor Archives for

Thanks Richard, I'll check that out Chris

Hello John, Ok, thanks for the info!. What is in the 'accessory kit'? Could I get an 8505A for less than US$300??? Regards, JOSE ----------------------------------------------------------------------

Hello! I have the chance to get a nice HP8601A + HP8407A setup. Please, could you comment about this set (performance, price, experiences, ...)? Thanks!!! Best regards, JOSE It's a pretty decent

Hello! I have the chance to get a nice HP8601A + HP8407A setup. Please, could you comment about this set (performance, price, experiences, ...)? Thanks!!! Best regards, JOSE

Hi for the LCD CRT replacement kit take a look at the link below. Good but WAY TOO EXPENSIVE!!! http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=150079037839 Best regards Sotiris Pdmtr In

08505-60227 OR 08505-60228 (REBUILT UNIT)

Hello, does anyone know the part number of the YIG module with the circuit designation of A2A19 and operating over the range of 4.21 to 5.51 GHz. Jim Barton

It was mentioned that there is an LCD replacement available for a tired CRT used in the 8568 and 8566 series. I use an external Tektronix X-Y-Z display which is OK but is there an LCD X-Y-Z device

Chris I had the same problem ,12.6V on the flood gun pin - no obvious flood gun operation. It turned out to be the ground lead from the "cold" side of the flood gun ( pin 11, black wire )was not

I have a problem with my 141T/8555A spectrum analyzer. The gear works perfect in the conventional mode, but it will not store. When I push the "store" button, the screen simply goes blank. Pushing

wrote: <http://www.home.agilent.com/agilent/techSupport.jspx?pid=1651A%3Aepsg%3&#92; I have these files but the disk is in a non-standard format and, anyway, I no longer have a floppy drive. I believe