开云体育

Paul, I used Windows uninstall of the Kiel software and reinstalled the package prior to sending the first note.? However, with the suggestion to repeat I found an issue occurred by my using the

Hmm, From your initial post it sounds like you bought one of the two available Gemini 2 mini upgrades. If this is a new purchase from Losmandy stop and call Losmandy, let them handle diagnosis and

In SkySafari you can specify the precession epoch: in the Settings menu choose Precession, checking "Use Current Epoch" sets it to JNow, otherwise you can specify the epoch (2000 for

Thanks Paul. I can get J2000 coordinates from my Starry Night Pro.? I've been to Didier's page on Catalogs and found some I'd like to add to Gem. His directions for loading them sound easy, I like

Sounds like a good plan, Jay. If you have a 2-4GB micro-SD card on hand, I'd format it with FAT and then try replacing the card in the Gemini CPU with it. That should be good enough to get Gemini to

Hi Kevin, Gemini is using J2000 coordinates for catalog entries. Sounds like SkySafari gives you JNow coordinates, precessed to epoch of date instead of J2000.

Summary: NO FIX. Reporting test and debugging actions taken: 1) Put hand controller and Gemini 2 box on the bench at home, connected them, supplied power, and verified that problem still existed,

While using Sky Safari to track down SAO Numbers to add to my Double Star list, so I can use Gemini HC SAO catalog, I found that Sky Safari uses RA(2025.3)/Dec(2025.3). Searching for Beta Mon, I

On Sun, Apr 13, 2025 at 06:52 PM, Jim Bachesta wrote: > > My hand controller is displaying a solid white screen, with no text or > images. I am running Gemini-2 with version 6.12. These are the

Thanks Chip and Paul, It looks like I'm going to get some clear weather for the next couple of nights.? I'll upgrade to Level 6.12, reset the HGM to defaults, double check revesal check boxes on

So many things can go wrong, for sure it is always good to be able to swap HC and mainboard for faster diagnostics. Thinking about this, the simplest way to produce this symptom (HC tries to connect

On Sun, Apr 20, 2025 at 09:14 AM, Mtn Goat wrote: > > > The ability to operate Gemini via Ethernet does not prove the Gemini is > good. The buffer circuit in Gemini for the HC could still be bad. >

Mike, I think you should try to upgrade to the latest firmware and then, reset to defaults, like Chip suggested. There was nothing that I’m aware of in 6.02 or later releases that should affect DEC

The ability to operate Gemini via Ethernet does not prove the Gemini is good. The buffer circuit in Gemini for the HC could still be bad. Helpful if someone could loan their HC to Jay for testing

On Sun, Apr 20, 2025 at 06:26 AM, Jay Freeman wrote: > > In January I retrofitted my old G-11 to Gemini 2. The Gemini 2 worked the > first two times I had it out but tonight it failed during

Hi Mike, I know there was a way to reverse the direction of travel in L5.x through the web server UI but it must not have been an option visible in the HC until L6.x.? AFAIK users have always been

Paul, I checked the setting of the boxes when and they were not checked.? At the moment the scope is not setup due to weather, so any additional analysis of the issues will have to wait.? One note,

Jay, It looks as if the bootloader has difficulties to access the SD card and delays the startup of the main board, while the HC is waiting and trying to communicate again and again. If your board

In January I retrofitted my old G-11 to Gemini 2. The Gemini 2 worked the first two times I had it out but tonight it failed during startup. It made it past recognizing the (Losmandy's) GPS unit but

G'morning, After building a model and setting limits last wknd., I was able to get some observing in last night. My Goto's were putting my object in the FOV of an 8mm/122x eyepiece. Although not quite