开云体育

Greetings all, I have gotten my DE19 digital interface working with Winlink Express as well and thought I'd post/monument some screen shots for set up reverence. I'm using Winlink Express on an old win7 mini laptop. This was the ADDITIONAL RADIO SETTINGS window in the Virtual TNC- you'll want to pick the COM port that your DE19 is using, not remember it's RTS switching. It might be compatible with the ICOM models that work with other software as a clone type radio but I've had good luck with the NONE radio setting. And that's Upper Side Band not Universal Serial Port in the top row. This is the VIRTUAL TNC settings window. I'm set on COM5 and my COM Port is communicating at 9600 Baud. This is another thing too watch for. You may know or want to change this data flow rate to/from the hardware and that's in the Windows Devices under Ports where you'll look for or change that. I don't remember changing much else than inputting my call sign and telling the system to look for capture and playback on the USB Audio Device. I only had the DE19 plugged in and no USB microphones or sound cards so it was the only thing for me. This set up screen is under the main session not the Virtual TNC window. Again I used Manual rather than any make/model listed, we have an U-D mode on our G106 units, PTT was on COM5 and that could vary for you depending on your computers assignment of the USB then you plug it in. Mine is set for 9600 baud as a speed for talking to the DE19 and RTS mode for transmit control. It's not much of a walk though but I hope that documenting our successes with the radio will help others their equipment and keep active doing the things they they enjoy. Best 72 to everyone, N2QFD//Mal

I was going to try the G-106 at a pota park today but I forgot my headphones and the internal speaker was just to low for me to hear irt well. I was set up close to a road so I had too much road noise. Has anyone tried an external spaker and did it help. Also what speake did you use? Thank you Jerry W8GV