开云体育

Geez... noise, not mouse. Autocorrect has fun with words again ? --Hank

Hissing could be a lot of things, such as electric fences, bad power supplies, bad fluorescent ballasts, and many other things. The 1st thing I would do is unplug the antenna. If it goes away, it's

Recently my 857D started giving too much noise on 80 Mts since few months. Is it due to condx.? or any thing related to the rig ? I tryed instaling a new ZS6BKW. still no use It is a type of hissing

When I first hook the 857 d up everything was working fine. Cat control frequency, everything at work for a couple 3 weeks and then one day all of a sudden nothing changed that I know of and it just

This is my first time to post on this site.? Most of you guess correctly the answer but I had stated it wrong.? I had done a factory reset due to several problems I've been having.? The missing

Hi Maurice, when yoi do a reset, you then need to go into menu 1 and set it on so that all menus are available as the default is to have a reduced menu set available. 73....Eric VK2VE.

Maurice ... Not to replace your parents, but be careful about accessing the hidden (technical) menus.? They are hidden for a reason.? No two radios have the same hidden menu values.? They are

Extended Menu's can be accessed by enabling Menu 001. Hidden Menu's can be accessed by starting with the radio off; press and hold buttons A, B, and C at the same time and while pressing the power

He said missing hidden menu items...just figured he had hidden menu onGo figureSent from my T-Mobile 5G Device

There is a menu item for Extended Menu. Resetting the radio returns it to the default setting of Off. Find it and change it to On. Sorry I don't the menu number off the top of my head.

not sure about missing menu items…strange unable to read or write to radio typically is bad sm fuse on the CAT din plug you can use a pico fuse to jump across jack w4grj

After doing a full hard reset, I am missing several Hidden Menu items.? I am also unable to read or write from radio.? Has anyone else seen this problem and have a solution?

The control head for my 857 was damaged in an accident, I am looking for a replacement if anyone has one (or a parts radio with a good head).? It is not the "D" model, not sure if that makes a

Hello Robert; That is a Great Idea. I have a height Restriction where I live and Shop. So I mount my Antenna (K-400) on the Left Side of the Downward Curve of the Front Hood. I live in a Very Low

Looks like the H3 has a tire mount on the back. I have made mounts of sheet steel that mounts between the tire and mount, goes above the tire and bends back at 90'. I then used standard mounts for the

Take a small strip of aluminum between the mount and your trunk to increase the thickness, that should stop the flex.

Priority is to bind any horizontal surface to the chassis with briad that has a large surface area. You need to include the exhaust as well if it is an ICE powered vehicle. -- Compton VK2HRX Sydney,

HELLO Don; I am Driving a Hummer H3 2008. I have Used Grounding Braid on all Doors, Rear Door, and Hood. The Antenna Is located on the Left Side, Rear of Hood. Can not install on Top of Vehicle

Also check the metal under the antenna to be sure it is connected to the frame. My Subaru Forester has no continuity from the roof to the frame [email protected]> wrote: Don Dodge W6SNX 714-271-7888

I wound up mounting mine on a trailer hitch receiver.? Had to add a grounding lead to the hitch itself, but works like a champ.?Ron Jakubowski, K2RJ?Sent from my Galaxy Tab? S5e