开云体育

I agree...mine fires up in 1 or 2 seconds...on the go! wrote:

Im confused. I turn mine on, its on the last freq, mode,power, etc that I used. Change bands, same thing.??, what checklist are you talking about?Can you clarify your comment?Bob wa7dxzSun City

What's this bit all about, I sure don't have to do this, Every time you start this radio up, you’ll have to go through a checklist of steps that can start to get tedious with daily use. Mick SA4MDN

Which is the best for your scanner. Learn about the differences in nickel-cadmium and nickel-metal-hydride. https://prezhost.com/2020/05/04/nickel-based-batteries/

Amateur radio, which is also known as ham radio, is a popular hobby worldwide, but choosing the perfect model for your needs can often seem impossible. You typically need to try out a radio so that

Too bad Howard, I guess I just got lucky with mine. That's the problem with success in one instance. The results are somewhat anecdotal unless others can verify.. Good luck with the soldering iron. --

No, VFO is in band, all other modes are operating normal. 73, Michael DF9TZ

Is the VFO set out of band? K3CLT Chuck Tobias

No improvement. I'm going to try one more technique using a soldering iron. meanwhile, the replacement I ordered from Radioworld in the UK is "dispatched" to quote them! This was a very good deal as i

TNX for the ideas so far. Even in the lowest setting there must be some TX output to be measured by a power meter. That's not the cause. I already went through all menu settings. Meanwhile I found out

I have one variant similar to signalink. Is a Cat/data interface Sm4xiu. Yes, is a possiblity that the isolation transformers, can be a source of problems. But now I jumpered it. I have made new

Max power on AM for FT-857D is 25W. Mark VK2MOH ?Michael It is menu #75 forgot that sorry Best Regards Hanford R Wright WA4LZC CCA# AC11-12590 y please pardon my typos.

Michael It is menu #75 forgot that sorry Best Regards Hanford R Wright WA4LZC CCA# AC11-12590 Sent from my iPhoney please pardon my typos.

Mike Check your menu go to RF power while in AM and check and see where it is set. Should be set to 100. Best Regards Hanford R Wright WA4LZC CCA# AC11-12590 Sent from my iPhoney please pardon my

Dear all, I recently bought an used 857D that does not tx in AM mode. This is not really a big deal for me as I usually do not need this mode. On the other hand I am curious finding the cause and

CA is Dry, but all 1000 miles of Beaches and their parking areas are Closed! I've experienced excellent propagation in the past from on top of the Bluffs overlooking the SoCal beaches. /s/ Richard

Yeah wet here today as well. Hope it all goes well Howard. -- 73 Brad N8YG

Try call Yaesu directly. That is the route I went when both mine had zebra strips and Yaesu was cheaper than the third party places. Leonard K. Pennock AD7AS Those who walk bravely through life,

:-D

Brad - I did - waiting for the monsoon to subside before I swim out to the truck!