开云体育

Can't comment on the cost of display. I had the ceramic filters go bad on my FT-857D radio. Was not too happy as the radio was used at most 10 hours (it was my backup), but at 12 years old, any

I have a RigBlaster Advantage connected to my 857? - when the RigBlaster Advantage is connected to an HP Laptop - I am quite successful - Mic works properly (if I want to make a voice contact), and

I've cleaned many zebra strips on various LCD displays with good success. My understanding of the FT857 is that zebra strips are not the problem. They evidently use some kind of adhesive between a

Hello All, So far, my 857 keeps on tick'n, however, we used to utilize some old industrial power monitors that developed stripes on the lcd displays and found that if the Zebra strips were just

And, if I'm not mistaken, you're supposed to keep transmissions very short when working satellites. Get Outlook for Android<https://aka.ms/AAb9ysg>

This is what it looks like inside the FT-857 Display Panel

Zack, The short answer is, NO, there's no EASY way to solve this problem, except replacement of the assembly. Here's the longer answer, and the reason why. The failure is a poor or decaying soldered

I am sure this has been asked before, but is there a fairly easy way to get rid of a few vertical stripes on the FT957 display? The seem to come and go. 73, Zack W9SZ

Hy. I Had the Same,... After master reset. Everything was fine... Check ist Out.. Good luck Andy DF1HF -- Diese Nachricht wurde von meinem Android Mobiltelefon mit GMX Mail gesendet.

Peter: This behavior for several Yaesu radios (857, 817, 897) is mentioned in the SatPC32 documentation.? (Hints->Yaesu, see the Reame(Yaesu).txt file).? Manual tuning (front panel) works, but

Yes that is a limitation of the 857 when using for satellite operation.? It really isn't a big problem if you keep your transmissions short. Don K9AQ

Hello Yono, I tried it here, and indeed, the 857 will not accept frequency change commands by CAT during transmit. I am pretty sure the CAT interface itself functions, as I use CAT command to switch

Dear all, While qso with a friend that uses a FT-857 thru a linear satellite, I noticed he always drifts upwards. He said GQRX was not updating the freq while TX and he has to release the PTT button

Thank you everyone. I learned a few things. I'll pass the info on to my Dad. 73, Mike / KA4CDN

There is now a 2M & 440MHz loop integrated into the model 100W 10-80M MagLoop. A most excellent choice for the 857 that also supports VHF UHF & HF. See - Loops & MagLoops (

Thank you I learned something

You should be able to program one of the screen menu buttons (Menu 065 - 067) or the mic buttons (068 - 070) as RF power set (Menu 075).? It would make it easy to quickly bring up that setting.

144 MHz: 20W 430 MHz: 10W with the brown wire. 73 Alfred - DJ0GM

I did that, but put the grounding wire on a switch Mick SA4MDN

Grounding the brown wire in the power connector would drop maximum output to 10W. Leonard K. Pennock AD7AS Those who walk bravely through life, unafraid of loss or failure, find that they very rarely