开云体育

I have a FT857D which use to work great on digital. Now it works BUT the transmitter keeps on after transmitting, my settings NR 37 24, 40 10, any other numbers to associate with digital? I use a

These are available in the UK too for a good price: ?120 https://www.radioworld.co.uk/yaesu-ft857-ft857d-replacement-panel-screen-cs2140401 -- https://www.qrz.com/db/M0NOM/P

I ordered one. And I got free shipping. 73, Zack W9SZ wrote:

About a year ago I bought a replacement board and LCD from the UK (maybe $150 U.S. total) and replaced mine. No ribbon cable soldering needed, thankfully. Just needed to unsolder a 4 pin connector

I also had this problem for a long time. Then I saw an external display from ZL1CVD OM Chris. I bought the kit sometimes back and didn't work on it. Now I completed the wiring and as there was some

I am impressed.? I am tempted to buy one now while they are still available and just keep it on hand.? My radio's display has a few missing dots but it isn't bad enough yet. Damon Register KK4OFV

Off and running. Needs work. Suggestions? Bob Sent: Wednesday, July 21, 2021 2:32 PM To: [email protected] Subject: Re: [FT-857] FT-857 Display--AGAIN! ?? I unpacked my spare and photographed the

I unpacked my spare and photographed the PCB. Please see attached photos. Due to the settings, you may be able to zoom in for a closer look. Enjoy? Paul G. Chapman MInstLM? G4IJL ?

I see Ham Radio Outlet stocks these at $199,95 each. https://www.hamradio.com/detail.cfm?pid=H0-011493 It isn't clear how this is connected. Does it involve soldering a ribbon cable on? If so, I have

Can't comment on the cost of display. I had the ceramic filters go bad on my FT-857D radio. Was not too happy as the radio was used at most 10 hours (it was my backup), but at 12 years old, any

I have a RigBlaster Advantage connected to my 857? - when the RigBlaster Advantage is connected to an HP Laptop - I am quite successful - Mic works properly (if I want to make a voice contact), and

I've cleaned many zebra strips on various LCD displays with good success. My understanding of the FT857 is that zebra strips are not the problem. They evidently use some kind of adhesive between a

Hello All, So far, my 857 keeps on tick'n, however, we used to utilize some old industrial power monitors that developed stripes on the lcd displays and found that if the Zebra strips were just

And, if I'm not mistaken, you're supposed to keep transmissions very short when working satellites. Get Outlook for Android<https://aka.ms/AAb9ysg>

This is what it looks like inside the FT-857 Display Panel

Zack, The short answer is, NO, there's no EASY way to solve this problem, except replacement of the assembly. Here's the longer answer, and the reason why. The failure is a poor or decaying soldered

I am sure this has been asked before, but is there a fairly easy way to get rid of a few vertical stripes on the FT957 display? The seem to come and go. 73, Zack W9SZ

Hy. I Had the Same,... After master reset. Everything was fine... Check ist Out.. Good luck Andy DF1HF -- Diese Nachricht wurde von meinem Android Mobiltelefon mit GMX Mail gesendet.

Peter: This behavior for several Yaesu radios (857, 817, 897) is mentioned in the SatPC32 documentation.? (Hints->Yaesu, see the Reame(Yaesu).txt file).? Manual tuning (front panel) works, but

Yes that is a limitation of the 857 when using for satellite operation.? It really isn't a big problem if you keep your transmissions short. Don K9AQ