Re: Another buttons issue, and no audio
|
Isn't?ARCP 480 for kenwood only?
you could also try FLRig, also needs a serial adapter.?
Thanks Dan KC2STA
A couple clues you mentioned¡ ? S meter at S9+++ might indicate that the RF Gain is turned down. ?RF gain shares the squelch knob.? You also might try downloading the ARCP 480 remote control program and get yourself (or borrow) a USB-RS232 cable (RT Systems version always works¡Cheaper versions found on Amazon or Ebay might not.) ? Also, the MTune means that it is in memory mode and tuning from a memory channel. ? 73 & good luck! ? Ronald Jakubowski K2RJ ?
-- Dan Ziolkowski KC2STA
SKCC #4290T
Ubuntu LINUX
|
