开云体育

+ AA6YQ comments below + You can do that because Commander can be configured to link frequency-dependent device codes to a user-defined slider, which in turn generates CAT commands sent to your

+ KC4KK I am trying to use the frequency data in Commander to select the antenna.? ?Using the Frequency Dependent Device definitions and a Slider I am able to do this with the JST-245.? My

+ AA6YQ comments below

+ AA6YQ comments below + What frequencies does Commander display when you're making a QSO via the QO100 satellite? + What frequency does WSJT-X display when you're making a QSO via the QO100

+ AA6YQ comments below + Thanks, Brian. The description you sent is not the Kenwood CAT protocol, nor is it OTRSP; it's not a protocol that Commander supports. + If there's a way to configure your

Yes, if you convert your image (jpg) to bmp and use it as the background for the DXKeeper generated card as I documented in message 229021 </g/DXLab/message/229021> The

I would like that option! Thanks Dave.

Dave, I am trying to set the antenna switch on the amp to overcome the auto-band select limitation.? The problem is that amp has band definitions of 20-15 and 12-10.? If the amp selects the antenna

Dave. I talked to Palstar for same information and received the following info below. I can see the data and figured out how to send the command to turn the Remote Status Info on with my serial

How do I log Satellite QO100 QSOs in DXKeeper correctly using Flex 6600? All my QSOs on QO100 Satellite are showing the wrong Tx frequency (10Ghz instead of 2.4Ghz). When I look at the Logged QSO in

Dave Ok. 73 F5PHW Phil Envoyé de mon téléphone

+ AA6YQ comments below + QSOs on 60m are not valid for ARRL DXCC or WAS awards - to discourage the use of this very narrow band for DXing. + No, for the same reason. 73, Dave, AA6YQ

Dave Many thanks for quick answer. (As usual ...) It works, but no 60m in the stats. Another question : Should it be possible to have a 60m column in DxView ? It should be great. Many thanks 73

+ AA6YQ comments below + Click the "QSL Stats" button along the bottom of the Main window's "Check Progress" tab. The first two columns of the resulting report analyze your logged QSOs by band and

Hello DxLabs's users We are on the air with TM56REF. We are few operators using differents software for logging. Each evening, they send me their adif logs. I merge them into a general log with all

+ AA6YQ comments below + The user manual for that amp http://www.palstar.com/en/product-manuals/manual_la-1k.pdf + is confusing, as it describes different External Data Connectors on page 10 and

Unsubscribing worked for me. Jim N7US Sent: Thursday, May 1, 2025 19:22 To: [email protected] Subject: Re: [DXLab] Responding to Emailed QSLs The only emailed QSLs I receive are from qslworld.com

The only emailed QSLs I receive are from qslworld.com . If I scroll to the bottom of an email message bearing one of these QSLs, the next-to-last line contains an "unsubscribe here" link. Has anyone

Its the antenna switch in my Palstar 1k-la RF Amp.

Greetings to all! The number of Spot Database Entries as shown in configuration spot database tab, does it count unique callsigns of spots or not? + The "Size Control" panel on that tab displays