Dave,
?
I am trying to set the antenna switch on the amp to overcome the auto-band select limitation.? The problem is that amp has band definitions of 20-15 and 12-10.? If the amp selects the antenna based on its frequency detection, only 1 antenna is assigned to a band.? So, you cannot auto select a 17 or 12 m antenna seperate from 20 or 15.? My case is,
?
Ant 1? ?6 m beam
Ant 2? ?Tribander (10/15/20 m)
Ant 3? ?Multiband Dipole (40/17/12 m)
?
The frequency detect/band definition select works, but here is what happens since they did not provide seperate bands for 12 and 17 m.
If I assign 10 m to Ant 2, frequency detect of 12 m goes to Ant2. ?
If assign 15 and 20 m to Ant2,? frequency detect of 17 m goes to Ant2.
If I assign 40 m to Ant3,? frequency detect of 40 m goes to Ant3.? And only can get 12 and 17 m on Ant3 with manual front panel select or remote command (I have check that out with my terminal program).
?
Hope this helps.? Also, thanks for working with you in the past on the JST-245 capability.? I use every day.
?
Brian, KC4KK
