开云体育

DXView should show it in the caption of its "DXCC" panel, when a callsign is entered. It's not from the USAP database, though - it's from DXView's LoTW database, which is (also) updated periodically.

In the past I was somehow able to check when another US Callsign last uploaded to LotW. I cannot remember what application program (LotW, TQSL, DXLabs, etc.) I used to do this lookup. Am I dreaming

* more AA6YQ comments below Got frustrated with this and other problems so in midst of changing some things around when this discussion started. I will check this out when I get things back

Dave, Got frustrated with this and other problems so in midst of changing some things around when this discussion started. I will check this out when I get things back together. Thanks! Jack

Does anyone have a DXLab presentation that is more recent that those on the website? Jim N7US

Check that the ACC plug is connected properly. The 13 pin DIN that Kenwood (and Icom) uses can be inserted when rotated 180 degrees ("upside down"). Signals on the ACC connector (including PTT)

I believe I have the USB Interface II and DxLab working together. One of the programs had the baud rate at 9600, where the IC-10 kit in the TS-440S needs 4800. I was a little concerned with having RTS

Hi Jack, with respect to WSJT-X, ensure that you have the option "Settings->Radio->Mode->Data/Pkt" checked. 73 Bill G4WJS.

Bill, This is with WinWarbler and WSJT-X connected through Commander. Jack Sent: Monday, June 15, 2020 7:36 PM To: [email protected] Subject: Re: [DXLab] DXLabs, WSJT-X (ft8) and Yaesu

+ AA6YQ comments below The genesis of my problem was when my computer became useless last autumn. Win10 ran a troubleshooter and advised me to do their wipe and reload. That gets rid of all

Jack, is this with WinWarbler, WSJT-X, or some other data comms application?

The genesis of my problem was when my computer became useless last autumn.? Win10 ran a troubleshooter and advised me to do their wipe and reload.? That gets rid of all applications but leaves the

+ AA6YQ comments below Very pleased to see this discussion. Sometime back I used a Yeasu FT-920 with SignalLinkUSB to the mike port and worked fine. Recently decided to get back active again but

Very pleased to see this discussion. Sometime back I used a Yeasu FT-920 with SignalLinkUSB to the mike port and worked fine. Recently decided to get back active again but decided to switch to the

+ AA6YQ comments below This may have to do with updates from LoTW. I was told that I only really needed to update my latest call sign with LoTW unless I was entering more Q's from paper logs. +

+ AA6YQ comments below Hi Dave, Let me look again for the radio settings for baud rate, parity, word length, and stop bits that match your radio's settings. I'm not sure what to make of

The only differences between the DXLab Suite and N1MM+ configurations are in the CW/PTT settings and are due to the differences in the way DXLab Suite and N1MM+ do CW/FSK. 73, ... Joe, W4TV

OK, I was working from memory. Off is fine. Yes, if you are using Commander for PTT. See the example configuration for USB Interface II with DLab Suite is the USB II area at

This may have to do with updates from LoTW.? I was told that I only really needed to update my latest call sign with LoTW unless I was entering more Q's from paper logs.? Yes, I may do that someday

Hi Dave, Let me look again for the radio settings for *baud rate* , *parity* , *word length* , and *stop bits* that match your radio's settings. I'm not sure what to make of this: * set the *RTS*