Hi Jack,
with respect to WSJT-X, ensure that you
have the option "Settings->Radio->Mode->Data/Pkt"
checked.
73
Bill
G4WJS.
On 16/06/2020 01:44, Jackson McNees
wrote:
toggle quoted message
Show quoted text
Bill,
?
This
is with WinWarbler and WSJT-X connected through Commander.
?
Jack
?
?
On 15/06/2020 22:29, Jackson McNees wrote:
Very
pleased to see this discussion.? Sometime back I used a
Yeasu FT-920 with SignalLinkUSB to the mike port and worked
fine.? Recently decided to get back active again but decided
to switch to the data port to free up mike and to start
using DxLab Suite.? Although the FT-920 is in DATA mode,
after transmitting, the 920 changes to USB.? Looked high and
low through Commander docs to see if something there but
found nothing.? Based on this discussion, will have to see
if I have to set up a command sequence to change mode after
transmitting.? Hopefully this will give the fix I need!
?
Jack,
K4IJQ
Jack,
is this with WinWarbler, WSJT-X, or some other data comms
application?
--
73
Bill
G4WJS.
