开云体育

You can't blame Global if someone decides to stop answering buro cards or if your buro takes forever to get to you. ?At 13 cents a card I can't get too upset if they don't respond ?? K4iaBuck

If you are going to print a lot and you want to save money and print quickly I would look at the new Epson Eco tank printers. They use ink bottles that you can buy at a fraction of the price of

I don't have time to get into the technical details at the moment, but I would not expect K3 text decode to work when LP-Bridge is in the middle. 73, ~iain / N6ML dxlab@...> wrote:

OK, I think you're on to something Joe. I shut down Bridge and moved Commander's serial port to the Router-created COM-2 instead of the Bridge-created COM-13 and I got decode back. Since I'm going to

I too was looking at Global QSL for buro cards, I register and have look at my Inbox of QSL's supposedly they have sent to my CT buro, but some of them I never receive here some are from 2011 and

Dave left out one step: 3+) Terminate DXView. One easy way to do this is to right click on the DXView icon (a white "?" on a green circle) on the task bar and select "Close all windows" 73, Rich -

Buck, had thought about doing that too, But, I see more and more notices about this guy and that guy, no longer responding to Buro cards, and wonder just how much waste of money and time it is to try

I may not be doing this correctly, but when I double click after step 4, I get the message DXView is already running. With DXView minimized, I terminated all via launcher then restarted with the same

Start by removing LP-Bridge ... make sure it is not blocking the polls from Commander for "TB;" (text get). 73, ... Joe, W4TV

A lot has changed unfortunately. I got an LP-PAN, LP-Bridge, NaP3 and Skimmer software, and added a third sound card dedicated to the LP-Pan/Skimmer. I hadn't really noticed exactly when things went

Still works here. What did you change or add? 73, ... Joe, W4TV

-----Original Message----- Sent: Friday, February 26, 2016 1:23 PM To: dxlab@... Subject: [dxlab] Decoded CW no longer being passed from K3s to WinWarbler CW messages decoded from my K3s

Hi Dave/all, CW messages decoded from my K3s are no longer getting passed to WinWarbler. I have the two check boxes in Commander's GENERAL checked, and I've restarted DX Lab Suite several times. RTTY

I would heartily recommend GlobalQSL.com for bureau cards. They print your full-color custom-designed card, including the QSO information and ship it to the foreign bureau for about 13 cents a card.

-----Original Message----- Sent: Friday, February 26, 2016 10:37 AM To: dxlab@... Subject: [dxlab] Spot Database Display tab Help button? Don't see one on the SpotCollector Config Spot

I've been happily using an HP LaserJet 200 M251 to print QSL cards. Welcome back, Jose! 73, Dave, AA6YQ

-----Original Message----- Sent: Friday, February 26, 2016 8:11 AM To: dxlab@... Subject: [dxlab] DXView Starts Maximized No matter what I do, each time DXView starts from the launcher

I changed the max from 6 to 10 months. I than did a check for LOTW members and that solved my problem. Everything shows LOTW between the windows now. Thanks for your help! Mike W9RUK? [dxlab]

Don't see one on the SpotCollector Config Spot Database display tab. Should there be? Found the needed help eventually but Help button would be useful. Thanks! jim ab3cv

Good Morning, I know I have seen this thread before, but alas, I am unable to locate it. I am finally getting station back together and still fighting my township for towers.but . In preparation for