Reducing power does eliminate the problem.? Also just noticed the mode switches between USB, where I set it, to LSB and then back again.? This is where the VFO display is.? Weird. 73, Bill
On Saturday, March 14, 2020, 01:01:06 PM CDT, g4wjs <bill.8@...> wrote:
Hi Bill,
OK. So if you reduce power to minimum,
or use a dummy load, does the issue go away?
73
Bill
G4WJS.
On 14/03/2020 17:58, Bill via Groups.Io
wrote:
In WSJT-X I selected DX LAB
SUITE Commander as the radio.?
73,
Bill
On Saturday, March 14, 2020, 12:34:34 PM CDT, Bill via
Groups.Io <ko4nrbs@...> wrote:
See attached pic taken during transmit.
73,
Bill
On Saturday, March 14, 2020, 12:31:22 PM CDT,
g4wjs <bill.8@...> wrote:
Hi
Bill,
can
you explain how you have arranged for
Commander to have CAT control of your rig
while WSJT-X is also using the CAT
interface?
73
Bill
G4WJS.
On
14/03/2020 17:28, Bill via Groups.Io wrote:
Can
you explain exactly what you see in
Commander when the above happens
please?
What rig do you have and what
options have you selected for
WSJT-X
"Settings->Radio->RIg",
"Settings->Radio->PTT Method",
"Settings->Radio->Mode",
and "Settings->Radio->Split
Operating"?
Rig
is a Kenwood 850S.
Settings:
Radio-
Kenwood
PTT
Method-? CAT
Mode-
None
Split-
None
What
I see is the VFO A frequency in
Commander goes to 00 during transmit
then back to my selected frequency
when the rig is toggled to receive.
73,
Bill
On Saturday, March 14, 2020,
12:21:42 PM CDT, Bill Pence <pence.bill@...>
wrote:
Do you RIT (clarifier in
Yaesu...) enabled and tuned on
the rig?
?If so, the tx freq will
change as RIT gets removed for
TX....
Looks
like I am getting RF
via the CAT cable into
DxCommander.? When
transmitting the VFO
frequency will drop to
00 then go back to the
selected frequency
when in receive.?
WSJT-X and the rig's
frequency does not
change.
What mix
clamp on ferrites
should I use on the
cable?
73,
Bill
KO4NR
|
Hi Bill,
OK. So if you reduce power to minimum,
or use a dummy load, does the issue go away?
73
Bill
G4WJS.
On 14/03/2020 17:58, Bill via Groups.Io
wrote:
toggle quoted message
Show quoted text
In WSJT-X I selected DX LAB
SUITE Commander as the radio.?
73,
Bill
On Saturday, March 14, 2020, 12:34:34 PM CDT, Bill via
Groups.Io <ko4nrbs@...> wrote:
See attached pic taken during transmit.
73,
Bill
On Saturday, March 14, 2020, 12:31:22 PM CDT,
g4wjs <bill.8@...> wrote:
Hi
Bill,
can
you explain how you have arranged for
Commander to have CAT control of your rig
while WSJT-X is also using the CAT
interface?
73
Bill
G4WJS.
On
14/03/2020 17:28, Bill via Groups.Io wrote:
Can
you explain exactly what you see in
Commander when the above happens
please?
What rig do you have and what
options have you selected for
WSJT-X
"Settings->Radio->RIg",
"Settings->Radio->PTT Method",
"Settings->Radio->Mode",
and "Settings->Radio->Split
Operating"?
Rig
is a Kenwood 850S.
Settings:
Radio-
Kenwood
PTT
Method-? CAT
Mode-
None
Split-
None
What
I see is the VFO A frequency in
Commander goes to 00 during transmit
then back to my selected frequency
when the rig is toggled to receive.
73,
Bill
On Saturday, March 14, 2020,
12:21:42 PM CDT, Bill Pence <pence.bill@...>
wrote:
Do you RIT (clarifier in
Yaesu...) enabled and tuned on
the rig?
?If so, the tx freq will
change as RIT gets removed for
TX....
Looks
like I am getting RF
via the CAT cable into
DxCommander.? When
transmitting the VFO
frequency will drop to
00 then go back to the
selected frequency
when in receive.?
WSJT-X and the rig's
frequency does not
change.
What mix
clamp on ferrites
should I use on the
cable?
73,
Bill
KO4NR
|
In WSJT-X I selected DX LAB SUITE Commander as the radio.? 73, Bill
On Saturday, March 14, 2020, 12:34:34 PM CDT, Bill via Groups.Io <ko4nrbs@...> wrote:
See attached pic taken during transmit. 73, Bill
On Saturday, March 14, 2020, 12:31:22 PM CDT, g4wjs <bill.8@...> wrote:
Hi Bill,
can you explain how you have arranged
for Commander to have CAT control of your rig while WSJT-X is also
using the CAT interface?
73
Bill
G4WJS.
On 14/03/2020 17:28, Bill via Groups.Io
wrote:
Can you explain exactly what you see
in Commander when the above happens
please? What rig do you have and what options
have you selected for
WSJT-X "Settings->Radio->RIg",
"Settings->Radio->PTT Method",
"Settings->Radio->Mode", and
"Settings->Radio->Split Operating"?
Rig is a
Kenwood 850S.
Settings:
Radio-
Kenwood
PTT
Method-? CAT
Mode- None
Split- None
What I see
is the VFO A frequency in Commander goes to 00 during
transmit then back to my selected frequency when the rig
is toggled to receive.
73,
Bill
On Saturday, March 14, 2020, 12:21:42 PM CDT, Bill Pence
<pence.bill@...> wrote:
Do you RIT (clarifier in Yaesu...) enabled and
tuned on the rig?
?If so, the tx freq will change as RIT gets
removed for TX....
Looks like I am getting RF via
the CAT cable into DxCommander.? When
transmitting the VFO frequency will drop to
00 then go back to the selected frequency
when in receive.? WSJT-X and the rig's
frequency does not change.
What mix clamp on ferrites
should I use on the cable?
73,
Bill KO4NR
|
See attached pic taken during transmit. 73, Bill
On Saturday, March 14, 2020, 12:31:22 PM CDT, g4wjs <bill.8@...> wrote:
Hi Bill,
can you explain how you have arranged
for Commander to have CAT control of your rig while WSJT-X is also
using the CAT interface?
73
Bill
G4WJS.
On 14/03/2020 17:28, Bill via Groups.Io
wrote:
Can you explain exactly what you see
in Commander when the above happens
please? What rig do you have and what options
have you selected for
WSJT-X "Settings->Radio->RIg",
"Settings->Radio->PTT Method",
"Settings->Radio->Mode", and
"Settings->Radio->Split Operating"?
Rig is a
Kenwood 850S.
Settings:
Radio-
Kenwood
PTT
Method-? CAT
Mode- None
Split- None
What I see
is the VFO A frequency in Commander goes to 00 during
transmit then back to my selected frequency when the rig
is toggled to receive.
73,
Bill
On Saturday, March 14, 2020, 12:21:42 PM CDT, Bill Pence
<pence.bill@...> wrote:
Do you RIT (clarifier in Yaesu...) enabled and
tuned on the rig?
?If so, the tx freq will change as RIT gets
removed for TX....
Looks like I am getting RF via
the CAT cable into DxCommander.? When
transmitting the VFO frequency will drop to
00 then go back to the selected frequency
when in receive.? WSJT-X and the rig's
frequency does not change.
What mix clamp on ferrites
should I use on the cable?
73,
Bill KO4NR
|
Hi Bill,
can you explain how you have arranged
for Commander to have CAT control of your rig while WSJT-X is also
using the CAT interface?
73
Bill
G4WJS.
On 14/03/2020 17:28, Bill via Groups.Io
wrote:
toggle quoted message
Show quoted text
Can you explain exactly what you see
in Commander when the above happens
please? What rig do you have and what options
have you selected for
WSJT-X "Settings->Radio->RIg",
"Settings->Radio->PTT Method",
"Settings->Radio->Mode", and
"Settings->Radio->Split Operating"?
Rig is a
Kenwood 850S.
Settings:
Radio-
Kenwood
PTT
Method-? CAT
Mode- None
Split- None
What I see
is the VFO A frequency in Commander goes to 00 during
transmit then back to my selected frequency when the rig
is toggled to receive.
73,
Bill
On Saturday, March 14, 2020, 12:21:42 PM CDT, Bill Pence
<pence.bill@...> wrote:
Do you RIT (clarifier in Yaesu...) enabled and
tuned on the rig?
?If so, the tx freq will change as RIT gets
removed for TX....
Looks like I am getting RF via
the CAT cable into DxCommander.? When
transmitting the VFO frequency will drop to
00 then go back to the selected frequency
when in receive.? WSJT-X and the rig's
frequency does not change.
What mix clamp on ferrites
should I use on the cable?
73,
Bill KO4NR
|
On Saturday, March 14, 2020, 12:29:01 PM CDT, Bill via Groups.Io <ko4nrbs@...> wrote:
Can you explain exactly what you see in Commander when the above happens
please? What rig do you have and what options have you selected for
WSJT-X "Settings->Radio->RIg", "Settings->Radio->PTT Method",
"Settings->Radio->Mode", and "Settings->Radio->Split Operating"?
Rig is a Kenwood 850S. Settings: Radio- Kenwood PTT Method-? CAT Mode- None Split- None
What I see is the VFO A frequency in Commander goes to 00 during transmit then back to my selected frequency when the rig is toggled to receive.
73, Bill
On Saturday, March 14, 2020, 12:21:42 PM CDT, Bill Pence <pence.bill@...> wrote:
Do you RIT (clarifier in Yaesu...) enabled and tuned on the rig?
?If so, the tx freq will change as RIT gets removed for TX....
Looks like I am getting RF via the CAT cable into DxCommander.? When transmitting the VFO frequency will drop to 00 then go back to the selected frequency when in receive.? WSJT-X and the rig's frequency does not change.
What mix clamp on ferrites should I use on the cable? 73, Bill KO4NR
|
Can you explain exactly what you see in Commander when the above happens
please? What rig do you have and what options have you selected for
WSJT-X "Settings->Radio->RIg", "Settings->Radio->PTT Method",
"Settings->Radio->Mode", and "Settings->Radio->Split Operating"?
Rig is a Kenwood 850S. Settings: Radio- Kenwood PTT Method-? CAT Mode- None Split- None
What I see is the VFO A frequency in Commander goes to 00 during transmit then back to my selected frequency when the rig is toggled to receive.
73, Bill
On Saturday, March 14, 2020, 12:21:42 PM CDT, Bill Pence <pence.bill@...> wrote:
Do you RIT (clarifier in Yaesu...) enabled and tuned on the rig?
?If so, the tx freq will change as RIT gets removed for TX....
Looks like I am getting RF via the CAT cable into DxCommander.? When transmitting the VFO frequency will drop to 00 then go back to the selected frequency when in receive.? WSJT-X and the rig's frequency does not change.
What mix clamp on ferrites should I use on the cable? 73, Bill KO4NR
|
Mike -
I am so glad you sent that You Tube... last summer my car was in the shop because it was running a bit roughly, but only sometimes. They ended up replacing the engine... thank goodness it was under warranty so I only paid my $100 deductible.
I'll bet that all it really needed was for the?turbo-encabulator to be recalibrated.
First thing Monday morning I'm going to go give their Service Manager a piece of my mind (if I can find one too spare).
Dave - K9FN
Installed new turbo-encabulator … ;>) ?
? - 73 and good DX de Mike, , Secretary ? ? Looks like it just came back up.
73,
Bob WB2NVR
|
Do you RIT (clarifier in Yaesu...) enabled and tuned on the rig?
?If so, the tx freq will change as RIT gets removed for TX....
Looks like I am getting RF via the CAT cable into DxCommander.? When transmitting the VFO frequency will drop to 00 then go back to the selected frequency when in receive.? WSJT-X and the rig's frequency does not change.
What mix clamp on ferrites should I use on the cable? 73, Bill KO4NR
|
On 14/03/2020 17:14, Bill via Groups.Io wrote: When transmitting the VFO frequency will drop to 00 then go back to the selected frequency when in receive. Hi Bill, RFI will not affect a piece of software, it could affect your CAT interface but the error you describe does not sound like that. Can you explain exactly what you see in Commander when the above happens please? What rig do you have and what options have you selected for WSJT-X "Settings->Radio->RIg", "Settings->Radio->PTT Method", "Settings->Radio->Mode", and "Settings->Radio->Split Operating"? -- 73 Bill G4WJS.
|
Looks like I am getting RF via the CAT cable into DxCommander.? When transmitting the VFO frequency will drop to 00 then go back to the selected frequency when in receive.? WSJT-X and the rig's frequency does not change.
What mix clamp on ferrites should I use on the cable? 73, Bill KO4NR
|
+ AA6YQ comments below
Maybe it is time to find another source but then is there any with the amount of data they have. This is the problem with a one source solution. It would be neat if PF cold automatically go to a second source. ?
+ Pathfinder provides 12 search buttons, so querying a second source of your choosing is one mouse click away.
+ On the Callbook tab of DXKeeper's Configuration window, there's a "Secondary Callbook" panel that lets you specify a second Callbook to check if the first Callbook lookup fails.
73,
Dave, AA6YQ
|
Re: Pathfinder - QRZ Down
|
Re: Pathfinder - QRZ Down
+ AA6YQ comments below I’ve been having trouble with Pathfinder all morning – they must be having a problem + Pathfinder has been working correctly. QRZ.com now appears to be available. + Note that when QRZ.com is unavailable, Pathfinder can still access other sources of QSL information. 73, Dave, AA6YQ Glenn Van Benschoten gtvanben@... From: [email protected] [mailto: [email protected]] On Behalf Of Bob WB2NVR Sent: Saturday, March 14, 2020 11:20 AM To: [email protected]Subject: [DXLab] Pathfinder - QRZ Down Pathfinder is unable to connect with QRZ.com after I updated my Win 10 system. According to QRZ is down. Anyone have any info about this? 73, Bob WB2NVR
|
|
|
|
|
Looks like it just came back up.
73,
Bob WB2NVR
|
You can check if the problem is yours, or if the site is down for everyone here:
73,
Bob WB2NVR
|
Maybe it is time to find another source but then is there any with the amount of data they have. This is the problem with a one source solution. It would be neat if PF cold automatically go to a second source. ? ? Outlook Desktop Gil W0MN Hierro Candente Batir de Repente 44.08226 N 92.51265 W EN34rb ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of Hasan Schiers N0AN
Sent: Saturday, March 14, 2020 11:05
To: [email protected]
Subject: Re: [DXLab] QRZ Seems to be down ? It's been up and down a lot lately. Yesterday it had other issues. There also have been some network issues that prevented users from even getting to the main page. ? ? On Sat, Mar 14, 2020 at 11:03 AM Gilbert Baron W0MN <w0mn00@...> wrote: Anyone else having trouble with PF and QRZ. This is what I get trying to reach QRZ on Web ? Hmmm… can't reach this page?took too long to respond Try: - Checking the connection
- Checking the proxy and the firewall
- Running Windows Network Diagnostics
ERR_CONNECTION_TIMED_O ? ? Outlook Desktop Gil W0MN Hierro Candente Batir de Repente 44.08226 N 92.51265 W EN34rb ?
--
W0MN EN34rb 44.08226 N 92.51265 W Hierro candente, batir de repente HP Laptop
-- W0MN EN34rb 44.08226 N 92.51265 W
Hierro candente, batir de repente
HP Laptop
|
Re: Pathfinder - QRZ Down
XML not working here. Pathfinder times out direct log to website times out. QRZ has been havi8ng a lot of reliability problems lately. ? Outlook Desktop Gil W0MN Hierro Candente Batir de Repente 44.08226 N 92.51265 W EN34rb ?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of Mike Flowers Sent: Saturday, March 14, 2020 10:24 To: [email protected]Subject: Re: [DXLab] Pathfinder - QRZ Down ? QRZCOM web server appears down here.?? XML API is still working … ? - 73 and good DX de Mike, , Secretary ? ? Pathfinder is unable to connect with QRZ.com after I updated my Win 10 system.??
According to?? ? QRZ is down.
Anyone have any info about this?
73,
Bob WB2NVR -- W0MN EN34rb 44.08226 N 92.51265 W
Hierro candente, batir de repente
HP Laptop
|
David Bunte
Paul
Mike Flowers
Gilbert Baron W0MN