开云体育

+ AA6YQ comments below is is possible to "comment out" a line is the command section? Such as is done is a bat file? It would assist in experimentation with commands. + Copy the command to its

Dave- is is possible to "comment out" a line is the command section? Such as is done is a bat file? It would assist in experimentation with commands. Thanks Dan KC2STA

Thanks Dave, Jim – KR9U Sent: Monday, June 22, 2020 7:22 PM To: [email protected] Subject: Re: [DXLab] ADIF file write on shutdown - request. + AA6YQ comments below I have been doing the ADIF export

This. Have had RTTY AFSK working well for some time. Thought I would tackle FSK. Forced me to learn more about 7610/DXL/WW/MMTTY/EXTFSK64 etc. When I got started in amateur radio in the fifties as a

Rick, Something to consider.? If the 7610 works FB on FT8 (or PSK31, other "sound card" modes), then it should work fine as well on RTTY/AFSK.? There's no actual benefit to FSK with that rig.? And

+ AA6YQ comments below Found one setting in the 7610 menus to be incorrect. My fault but the (Icom) documentation was pretty vague. Anyhow, in monitoring my RTTY FSK transmission on a separate

Found one setting in the 7610 menus to be incorrect. My fault but the (Icom) documentation was pretty vague. Anyhow, in monitoring my RTTY FSK? transmission on a separate receiver or with the 7610

+ AA6YQ comments below + I do not want to encourage the use of ADIF files containing every logged QSO for interoperation. If the developer of GridTracker would like to directly interoperate with

Hi Dave, I have been doing the ADIF export every time before closing DXK, I do like many of the GT features, therefore, I was just asking if an option to automatically write the ADIF file on DXK exit

+ AA6YQ comments below As I'm working 6 meters this season, I started using the GridTracker https://tagloomis.com/grid-tracker/ program as an addition to WSJT/JTAlert and PSK Reporter. I know, right?

As I'm working 6 meters this season, I started using the GridTracker https://tagloomis.com/grid-tracker/ program as an addition to WSJT/JTAlert and PSK Reporter.? I know, right? Grid Tracker must

+ AA6YQ comments below In the past I have created a queue of labels to be printed for paper cards received when I checked in the cards and then printed the labels. I ran out of cards and didn't create

In the past I have created a queue of labels to be printed for paper cards received when I checked in the cards and then printed the labels. I ran out of cards and didn't create the labels when I

Bill, All set like WIKI instructs: Rig: DxLab Suite Commander Poll: 1 sec PTT Method: CAT Mode: DATA/PKT Split: Rig Jack

Hi Jack, which WSJT-X option do you have set for the group "Settings->Radio->Mode"? 73 Bill G4WJS.

+ AA6YQ comments below + Please do the following: 1. On the General tab of Commander's Configuration window, check the "Log debugging info" box 2. Terminate Commander 3. Place Rig in DATA/USB mode 4.

Dave, Finally got the testing done. Rig by itself does not switch modes after going to transmit. Same for when only Commander is running. However, started Commander and then WSJT-X. Rig in DATA/USB

Commander -> Config -> General -> Radio panel In the bottom left corner set "Log Mode for Data-L or Data-U" ... one of the many options is FT8 73, ... Joe, W4TV

Sometimes I log an FT8 QSO manually.? It's rare but there are occasions when I input the data into DXK by hand instead of using the automated link between DXK and WSJT/JTA. When I do this, my Flex

Dave- Thanks for the detailed response. Dan KC2STA