开云体育

I have been off the air for quite a while putting up a new tower and antenna. Today opened DXLab to update what I have missed.? I'm told "Unable to open LOTW database Unrecognized Database

Instead of letting Launcher load the before, DXL and after programs automatically, I loaded them manually, one at a time watching CPU consumption on Launcher.? ?It always came to Zero. One of the

+ AA6YQ comments below Now, for the others in the card side, I saw your suggestion about using the ADIF file and I'm going to try that. + That recommendation was to enable use of the "Update Log"

+ AA6YQ comments below I figured out the LoTW problem. Thanks for your help, Dave! I went to the Adv button and used the filter duplicate QSO's button. That gave me 170 duplicates, I then went

Now, for the others in the card side, I saw your suggestion about using the ADIF file and I'm going to try that. Thanks again.? I really haven't been keeping after my DXCC paperwork since I was in

I figured out the LoTW problem.? Thanks for your help, Dave! I went to the Adv button and used the filter duplicate QSO's button.? That gave me 170 duplicates,? I then went and bulk-deleted

If I don't have my computer turned on or I get a loss of internet connection I lose some spots. Is there any way to get them back? I'm using the CQDX network and can get a download of 10,000 spots

+ AA6YQ comments below I run a lot of simultaneous programs and am constantly concerned about CPU overload. Watching Task Manager, I notice the Launcher runs about 2.5% of the load, even after all

I run a lot of simultaneous programs and am constantly concerned about CPU overload.? ?Watching Task Manager, I notice the Launcher runs about 2.5%? of the load, even after all the programs are up

Hi Dave. If I don't have my computer turned on or I get a loss of internet connection I lose some spots. Is there any way to get them back? I'm using the CQDX network and can get a download of 10,000

WAZ and WPX are like DXCC in mode matching ... they don't care except that the mode is "DATA". The only difference among DXCC, WAZ and WPX is that WAZ separates traditional RTTY from

+ AA6YQ comments below Just to avoid any misunderstanding, I agree that eQSL's current practice is questionable. If you are able to convince eQSL to change that is of course the best solution. I

Just to avoid any misunderstanding, I agree that eQSL's current practice is questionable. If you are able to convince eQSL to change that is of course the best solution. I did not even consider

I've been using AVG Internet Security for years without issues. There are others, but while I see people having issues with their antivirus and DXLabs software, WSJT-X, and JT-Alert, I've not had a

+ AA6YQ comments below + Thanks, Kent! 73, Dave, AA6YQ

I will ask the author of PSTRotator. If I find out anything I will let you know. Thanks 73 Kent N6WT

Jerome, you don't need to set any frequencies or SPLIT. Try this: 'VS1; 'MD0C; 'VS0; 'MD02 <END> This is assuming that the FT-950 does limit the Rx passband in USB-DATA mode, the user manual

I tried several times to capture a screen shot of the fast closing QRZ error screen. After 8 attemps, I got successful. There was a window which stated the wrong verification code was entered. Then

+ AA6YQ comments below Here is my code per Yaesu's CAT-manual and your email about 'split': FA7074000; MD02; FB7074000; MD0C; FT3; + When specifying CAT instructions in a Command Sequence,

Hello Dave, Relative to Bill G4WJS's reply, I'm making a command sequence to put VFO-A in USB and VFO-B at USB-PKT; both set at 7074000 Hz. It is not working; perhaps you can spot my error(s) or