开云体育

+ AA6YQ comments below I'm having a problem with false FT8 positives firing off alerts. I grid chase (and DXCC chase) on 6m. With my cluster connections up and WSJT and JTAlert-x connected, I get

I'm starting to get serious about confirming grids within North America that I have worked, but who never confirmed (usually because they're not on LoTW). I'm especially anxious to confirm any that

I'm having a problem with false FT8 positives firing off alerts. I grid chase (and DXCC chase) on 6m. With my cluster connections up and WSJT and JTAlert-x connected, I get frequent hits for stations

+ AA6YQ comments below I don't know whether I am doing something wrong to make this happen, but lately whenever I import a contact with a Quebec (VE2 or VA2) amateur from an ADIF file that does not

+ AA6YQ comments below I don't know whether I am doing something wrong to make this happen, but lately whenever I import a contact with a Quebec (VE2 or VA2) amateur from an ADIF file that does not

I don't know whether I am doing something wrong to make this happen, but lately whenever I import a contact with a Quebec (VE2 or VA2) amateur from an ADIF file that does not contain CQZ fields,

+ AA6YQ comments below I use the sota cluster at cluster.sota.org.uk port 7300 with Spot Collector. Normally this works great but today, after 1603Z, I get no updates although SotaWatch3 on the web

I use the sota cluster at *cluster.sota.org.uk? port 7300* with Spot Collector. Normally this works great but today, after 1603Z, I get no updates although SotaWatch3 on the web is working with no

John, have you tried Dave's solution of using the secondary CAT port in Commander to control SDR Console? -- 73 Bill G4WJS.

I don't know, but I can control frequency on my MacBook Pro using the 590s USB port with RumLogNG and run and control the 590 with SDR Console on it's db9 com port with a PC. Of course when you change

In de PST rotator DXLAB tracker setup choose the bands you want to control. PSTrotator uses Commander to query the frequency. DXView is used to point PST rotator to the direction. If you click on

+ AA6YQ comments belolw When I change the UDP port number in the Spot Source Config it works. When I close SpotCollector? and start it again it defaults back to 2237. Can it be changed that it

Dave, When I change the UDP port number in the Spot Source Config it works. When I close SpotCollector? and start it again it defaults back to 2237. Can it be changed that it remembers the

+ AA6YQ comments below I can run Spectraview okay connected to the 590s comport and DXlabs Commander to the 590s USB port no problems. SDR Console must be a different animal :-). + Where in the

I can run Spectraview okay connected to the 590s comport and DXlabs Commander to the 590s USB port no problems. SDR Console must be a different animal :-).

+ AA6YQ comments below + Having Commander and another application controlling the same transceiver in the manner you describe is an invalid configuration. + Try connecting SDR Console to Commander's

I run SDR Console on the comport and DXLabs on the USB port but they don't like each other for some reason even though they are on different comports. SDR Console just freezes up and DXlabs loads

Thank you Iain. I had previously used DXView to check the dates. But, it is good to know the LotW method too. Best Regards, Dave, w6de

+ AA6YQ comments below DXView should show it in the caption of its "DXCC" panel, when a callsign is entered. It's not from the USAP database, though - it's from DXView's LoTW database, which is

DXView should show it in the caption of its "DXCC" panel, when a callsign is entered. It's not from the USAP database, though - it's from DXView's LoTW database, which is (also) updated periodically.