开云体育

A couple weeks ago I started having issues with garbled audio. I have 2 DINAH on 1 system. I have a PAUL and finally was motivated to connect it and has the same issue. Good news is, it’s not the DINAH or the computer. If you are running allstarlink ASL3 on a PC, the most recent updated kernel is distorting audio. The team is aware of it and the workaround for now is to pin the previous kernel for now. ALLSTARLINK V3 USERS PLEASE READ The stock kernel released with Debian Bookworm 12.9 introduces some audio problems with AllStarLink3/app_rpt. You will experience this problem in the following configuration: Asterisk/app_rpt is running on an amd64/x86_64 platform Asterisk/app_rpt is running on physical PC hardware (Raspberry Pis not affected!) The package linux-image-6.1.0-29-amd64 or linux-image-6.1.0-30-amd64 is installed To temporarily address the issue until a permanent fix can be identified, please apply the following hotfix to your system: wget -O- https://repo.allstarlink.org/hotfix/asl3-deb12-kernel28-fix.sh | sudo bash -x Follow all on-screen directions as needed. Reboot at the completion. This does not affect pi. -Michael

Hi Guys, Our club has just got hold of a Spectro MX800 2M Repeater.. The Repeater has an DB15 IO port on the back where I believe it can receive Audio In and Audio Out. I would like to be able to connect this Repeater to the AllStar Network and are wondering if I could use a Dinah USB-C via a Raspberry Pi connected to the Repeater. Does anyone know how I can connect this Repeater Spectro MX800 Repeater to the AllStart network ? Thanks. Craig vk3ncr

I'm wondering if the TM-V7 will work for DINAH I can't find good information online or any videos on how to set it up. Does anybody have any good information or documentation on how to make this work?

DEC 1- From the Hamshack of W8LM -Ice station Kansas... Last 2-3 days Yaesu has announced 3 new rigs. Descriptions can be found on YOUTUBE on the Ham Radio 2.0 Channel and Yaesu- John Kruk - Yaesu National Sales manager Channels. Of the new 3 FM ANALOG only FM radio's the interesting one which will increase DINAH sales , is the VHF-UHF 55/50 watt mobile.The FTM-150RASP https://www.yaesu.com/indexVS.cfm One of the new features is an receiver audio digital noise processor that brings weak signal audio up and reduces/eliminates noise. It reminds me of switching between weak signal work analog and moving to fusion.. There is a demo of it on the Yaesu Channel- John Kruk web cast.. If you've ever worked ANALOG weak signal and switched to Fusion, the same signal becomes crystal clear. John also speaks about how many hams are not interested in digital modes and the demand for ANALOG radio's is there. Yaesu is filling the need. I think he never mentions ALLSTAR as it conflicts with WIRES -X but he does mention you can run WIRES-X in Analog with these radios so it will work with DINAH.. He has to keep Brand Specific of course. Here's the deal.. the FTM-150RASP has a 10 pin DATA port.. Yaesu sells a ($29.95) 10 pin to 6 pin data cable that will interface to DINAH.. then DINAH goes into a Raspberry PI - your Flavor and you're on ALLSTAR. John states the 3 rigs will be available at authorized dealers the "End of November" which was yesterday.. Not like other manufacturers that announce radios and they are not stocked for 6 months. John also mentions all Yaesu Radio's come with a 3 year warranty, So scrounging for a used rig with a data port at some hamfest to plug in a DINAH in is no longer a crap shoot. When compared to a FUSION FTM-500 and all it takes to get on WIRES-X for worldwide communications.. Old poor hams like me, can have the same amount of fun, and even more with a FTM150RASP, a DINAH, and a Raspberry PI.. I have everything but the new YAESU.... Santa do you hear me??? Merry Christmas to all, Larry W8LM ARRL Life Member - Licensed 59 years.

My new DINAH-C (assembled from kit) is not seen by Windows computer (connected with USB-C to USB-A cable) or by Mac (connected with Apple USB-C to USB-C cable). Am I missing something obvious?

There is a local repeater without Allstar access, and we'd like to enable that without adding anything at the repeater site. We are trying to set up a VHF rig with a DINAH, so the Allstar audio would be sent to the repeater. The repeater audio would be received into the Allstar node by the radio. We attempted it, but the repeater starts looping a transmit/receive cycle as soon as the TX is released. So it sits quietly, receives audio ok, but as soon as we try transmitting via the DINAH node, the repeater keeps cycling. Is there a way to do this, or are we just missing something basic?

hi i want to setup a ctcss tone for TX i am using a Dinah node Thanks

hi all i am trying to change my image on my supermon header looking for info on how to do it

Hey just woundering how i would go about changeing my operating freg its 146.550 now i want to change to146.560 thanks

What radio is your Dinah plugged into? For me, it’s a Kenwood TM-V71A, and I just tune the VFO.

My DINAH is causing my pi node to act erratic. It works fine for a while, then sometimes it knocks out the wifi on the pi itself out. I ping the pi and it will be non responsive, if i unplug the DINAH, the pi immediately returns to normal operation, and the come back online. It is a strange problem to have. Possibly I messed up when soldering something? The pi case is a skeleton case, so maybe there is some interference between the pi and the DINAH. I figured since the DINAH does not have a radio inside of it, it wouldn't be as much of an issue.

Has anyone used a DINAH with an FTM-500? I have been unable to make it work inbound or outbound.

I can’t get my node to accept only ctcss traffic. It works fine, but it will pass traffic even without a ctcss tone. The FT-8900 is set with ctcss enabled with ENC/DEC. I am using the main band. The packet speed is set to 1200. The packet band is set to main. I have trimmed the data connector to ensure that it is seated correctly in the port. The simpleusb-tune settings are: (H) plfilter= enabled (J) cos from= usb (L) ctcssfrom= usb I have tried to change these parameters with many variations with no success. These settings work fine on my other node that is using an FT-100. The node with the FT-100 will only accept traffic with ctcss tone as desired. Any help would certainly be appreciated. Victor, KB5AKO

I’m looking for a free, tried, and proven ssh terminal program that works well with my iPad. My windows terminal works fine, but sometimes it would be real convenient to use my iPad. Any suggestions would be greatly appreciated. Victor, KB5AKO

Hi I just received my Dinah USB-C board and for the life of me I cannot figure out the programming (set up) menu for the Kenwood TM-700 Radio to make it work. It is not communicating with Dinah has anyone having any experience with the set up and programming. Thank you.

Hi guys Looking to hook on a Dinah v4 board onto my tm 700 it should be here any day now. Is there any jumpers I have to cut or add

Hi, Does anyone have a fully assembled and working DINAH they would like to part with? Thanks, Peter W2PMS

Hi Due to me popping the COM port on my Kenwood D710, I'm only left with the DATA port. Whilst I don't see an explicit PTT pin on the diagram, I note it is listed as compatible. Can someone confirm this is the case? Thank you so much. M0CRT