Hold up Joe
Something going on with the nj2dg network conection. Dont go nuts, trying to get it to work, right now.
Once i noticed that nj2dg was not on the 20A reflector, I started to scratch my head. So i gave the dd a shot. it looks like i am handshaking with with the repeater but no internet connection. I would say keep checking the reflector status site on the net. and dont try DD until, you see the stack back on the reflector. My guess is that they have a problem with there internet connection.
Looks like Murphy is kicking you in the pants.
JIM
toggle quoted message
Show quoted text
--- In D-STAR_23cm@..., "viaopensource" <kc2zki@...> wrote:
Thanks Jimmy! Plan on taking one of my ID1's to work this coming week and playing with these settings. Its about 17 miles from Martinsville, but I have access to the roof tops which should help. At 12 watts I think I should hit the repeater. I'll let you know how I make out.
--
Joe
kc2zki
--- In D-STAR_23cm@..., "james" <jimmy.sull@> wrote:
best way to set up the rig is with a computer. however i have to use an xp mchn, because i cant find 64 bit drivers.
to work martinsville dont even try if you do not have a good siginal
check out the sig on 1.2 dv first.
1284.000 dv neg split down 12.000
settings for nj2dg DD
freq 1250.000
mode DD
RP RPS Must be RPS
offset 0.000
your nj2dg
rpt1 nj2dg A
rpt2 nj2dg G
on the face press the TXinh button so that TXinh is off
unless you are using d-star settings you MUST NOT have your computer ip set to static.
if all is right so far you turn on the rig go to the channel, make sure the mode is DD and txinhib is off
disable any wireless on the computer.
unplug the cat5 cable from your router to your computer.
reboot your computer.
then plug the cat5 cable from the id 1 into your computer.
if all is well you should see the power lcds flashing power in & out. if so you are hand shaking with nj2dg
you should be able to browse the net at a slow pace if all is good
I have set up a wireless router with the id 1
using the d-star static infomation email me and ill give you that info
jimmy.sull@
--- In D-STAR_23cm@..., "viaopensource" <kc2zki@> wrote:
Hi Jim,
I am in Bayonne which is close to Newark Airport. I can hit NJ2DG 2m DV repeater with 5 Watts on an HT (92AD). I have two ID-1's and would like try DD on that repeater. Can you tell me what settings you use for this?
73's
--
Joe
kc2zki
--- In D-STAR_23cm@..., "james" <jimmy.sull@> wrote:
Hey it worked. I was very lucky, after the storm, I only lost power for three days. My cable (internet) also down. It looks like all the batteries in the green amp boxes up on the poles were dead. My 3g/4g sprint device was also down. My last resort 1.2ghz DD. A real big thank you to the guys at NJ2DG, Martinsville NJ. Sure I couldent surf the net but the connection worked fine for email and facebook. Using a cradlepoint wireless access point. My wife (kb2eyn) my self (ka2oon) and my daughter were all able to stay connected, sending and receiving welfare reports.
Other things like, generator, patch type TV antenna, made the aftermath no big deal, for us here.
Thanks again to the guys that run the Martinsville Stack, at NJ2DG
Jim Sullivan
KA2OON
