开云体育

Hi Dave, It sounds more synthesizer noise, It's really noticeable if I disconnect the antenna and then tune across the band and it's most prevalent on the higher frequency bands like 20 meters and

Aaron - I'm not a woodworker.? What you might want to consider for the top is to use a veneer which is a totally different colour than the wood underneath it, and do some carving with a router for

Sure thing, I will probably come to this thread often to ask for the opinions of the members of this great group on different ideas. For example, the part of me that enjoys working on the scroll saw

It doesn't matter same on battery

What power supply are you using ? Raj

3 things 1. With sbitx connected to antenna and transmit I have rf noise on transmit audio 2. If I have if gain turned up above 35 I get 2 rf spikes in the same spot on the display all bands 3. If I

Aaron, Please share a picture or two when you get it completed..it sounds like it's going to look really cool. Tim A. King Jr. Amateur Radio Station AG4RZ [email protected]> wrote:

I had a lot of trouble using an SD to microSD adapter. Once I got a usb device with a microSD socket, it worked. I did use a 64gb card though.

Found this. Haven't tried it though. https://github.com/Drewsif/PiShrink Hank W6IR

Shirley, I have read that there are ways to take an existing image and shrink it after it has been created.? That is done on a Linux OS, not a Windows.? I have not tried it. I agree that it would

A3HZ May 29 ? #102666?? If someone is having trouble because they cannot copy the image to a 32GB SD card, because there is a few bits less space on the card. I recommend the

Could do that, but I'm reluctant to because I only have a couple of 64 GB cards and LOTS of 32 GB. The images really should be prepared the same way the official Raspberry Pi OS ones are; they're

Shirley, Try burning to a 64 GB or larger card.? Most 32GB cards are just a little shy of the image size.? There are ways to make the standard image smaller; it has not been done to

Has anybody out there managed to successfully burn this to an SD card? Most of mine complain that they don't have enough capacity; the one that doesn't gets an I/O error near the end. Maybe the

Does it sound like spike noise, like the synthesizer moving through frequency steps?? Capacitors across the encoder terminals wouldn't help that at all.? Or is it more like wideband noise? If you

Hi Evan, Yes, I'm using the stock display and the stock firmware. I need to hook up my DE and see if I'm experiencing the same problem, it's not a huge thing as it goes away when I stop tuning, just

Hi Joel, The other potential noise source is the display.? Are you using the stock display with the stock software?? If not, would you please share your configuration? 73 Evan AC9TU

I have been noticing Encoder noise while tuning around the bands, I can see it in the waterfall and hear it in the receiver while tuning. Has anybody else noticed this? I might try installing some

I 3D printed a simple, snap on stand for my sBITX V2 for desktop use that leans it back 30 degrees for better viewing. The sides simply slide over the rear feet and are held in place by a small flange

I added these lines to sbitx_gtk.c so that I can configure the startup to the web UI in my user_settings.ini if (! strcmp ( get_field ( "#web" )-> value , "OFF" )) { write_console (FONT_LOG,