开云体育

Farhan, That makes sense. For basic radio operation, I can use the gtk screen.? When I want a digital operation, I can either open the Chrome interface on the gtk screen or use a remote computer to

Hi Evan, thanks for the hint. I commented this line https://github.com/afarhan/sbitx/blob/28ab6665c466cb393412b40a36e2621010aa49dd/sbitx_gtk.c#L4399. Works great. I still can open the web interface

Evan, The old UI still works as it did. However, things like the logbook, ft8 sequencing, telnet, etc., are all working only in the webui. - f

Farhan, I can close the Chrome interface, but the radio still works.? Are you saying the Chrome interface needs to stay up to have all the radio functionality? 73 Evan AC9TU

The gtk is now behind the webui. For instance, much of the FT8 messaging is done in javascript on index.html. The logging is also functional only on the web UI. - f

loopMasta, I believe that the "chrome" UI is opened on line 4190 of sbitx_gtk.c open_url("http://127.0.0.1:8080"); Try commenting the line out, and rebuild the sbitx software.? You must do this

Hi all, is it possible to disable the webUI Chrome app on startup of the sBitx software? I only use the webUI on a remote computer. Thx

Do you have any favorites with any other radios you use?? For the bandwidth of the uBitx, you don't need anything very fancy but small differences of overall efficiency and how good the speaker's

thanks for the idea -- '72 Aaron K5ATG

If you are using it in the shack and not portable use the biggest speaker you can. I had a 6 inch bookshelf speaker laying around out of it’s cabinet and it sounds like good AM to me when compared

I'm working on a uBITX v6 basic kit that did not include a speaker. What would be a good-sounding and quality aftermarket speaker? I'm building the case around the speaker and a 3.5" Nextion display

f, 7805 or better yet the LM317 makes an ok audio amp in a pinch. The input signal modulates the control voltage. Personally I like the 555 timer amp,? true

Thanks, guys -- keep those ideas coming! I bought NEW, longer ribbon cables and was very careful connecting them. I think I'm doing something wrong that the Pi2 couldn't display the SBITx screen

Pi2 display packages do not have the variety the pi4 does. Pi4 early versions vary too I had to use vga adpter and old pc monitor to use my first pi4 . Strange

The other time I believe that problem was solved by burning a new SD card.

Gordon, last week I had a similar experience. The screen on my V2 was dark! Since I had a DE with its own working screen I was able to swap parts to held isolate the problem. It turned out to be a bad

Hi Steve, I found the clock speed, so I will try connecting directly to the board. Thank you! 73 Evan AC9TU

Hi Evan; After you have selected the board type as ATTiny85 ( Micronucleus / DigiSpark ), additional options specific to that board type will appear in the Tools menu of the Arduino IDE (I'm using

Steve, Can you point me to the documentation on how to set the clock speed?? It would also help to know how to bypass the 5 volt regulator on the board. I call it a DigiSpark board, as that was the

It has been a long time coming, due to my ignorance,? and terror of losing yet another Raspberry.....but finally I have the software RUNNING again? ? ?I started with a Raspberry Pi 2 (all I could