¿ªÔÆÌåÓý

There is a confusion in instruction page. Line number 15 function button red wire line number 66 function button orange wire. Please clarify how t.o connect function button it is A2 or A3 Red or

Thank you!

Instead of "Scan range", I meant Tuning Range.

I have a mobile radio built that I do not intend to add a function button to. It is a radio that I want to keep simple and I don't want the user to be able to switch to USB or CW by mistake.? I would

Just released raduino_v1.13 which includes the frequency scanning functionality as suggested by KC8WBK. Many thanks Paul for this great idea! Download it from https://github.com/amunters/bitx40 (

Just released raduino_v1.13 which includes the frequency scanning functionality as suggested by Paul KC8WBK. Download it from https://github.com/amunters/bitx40 ( https://github.com/amunters/bitx40 )

The unit receives. So the tuning unit is working. Can you adjust tuning and get variation in frequency? I suspect so since you say that both SSB and CW are working. Does the background light up? Does

http://www.ebay.com/itm/Nano-V3-0-Mini-USB-ATmega328-5V-16M-Micro-controller-Board-CH340G-Arduino-Cable-/162002876661?hash=item25b81fb8f5:g:RYYAAOSw5cNYfJ0j (

CH340/CH341 is no problem on OSX just download the right driver and install it ! problem with a USB-Cable is also easy fixed....buy a cheap Nano incl. cable from China

Try this: https://drive.google.com/file/d/0B8v7bRFPZV71VGpvODhrRnZHUUE/view?usp=sharing ( https://drive.google.com/file/d/0B8v7bRFPZV71VGpvODhrRnZHUUE/view?usp=sharing ) I used a $5 USD Baofeng

The extra SMD cap could be for C107 (0.1 uf) which was found to be missing from some boards that were shipped.

*it's true, some Nano clones have quality problems especially missing bootloaders or bad soldering, but looking on the price difference, less than 2€ including shipment from china against about

Good Lord guys, You got a working radio for $59.00 and now you want to pick nits. ¡°Real¡± Arduino or not is serves the purpose of acting as a VFO. v/r Fred W4JLE Sent: Thursday, May 25, 2017 07:51

Hopefully you got both of them working. Jack, W8TEE To: [email protected] Sent: Thursday, May 25, 2017 1:27 PM Subject: Re: [BITX20] usb cable Hi Jack.?I have also been using Arduino clones for years

Hi Jack. I have also been using Arduino clones for years but the only two I have ever had problems with, connectivity-wise have been those used on the Raduino boards. I have two HFSigs Raduino boards

Yeah I hear them really strong here in Oregon. That is why I moved up to 7.180 last Sunday. Sent: Thursday, May 25, 2017 6:11 AM To: [email protected] Subject: Re: [BITX20] BITX QSO Night, Sunday, May

My thoughts exactly.? The other night I got through a small pile up on W9IMS, a special event station, and was so happy with my $59 dollar wonder I was almost ready to sponsor my own dollar per voice

I have had a few Nano knockoffs that weren't happy with my system. However, running the drive app in the Drivers subdirectory has always fixed the problem after a reboot of the system. Jack, W8TEE To:

Connect your ohmmeter between the Ground and Clone on the plug. ?If the ohmmeter reads zero or very close to it when you press the PTT switch then proceed?ELSE the speaker/mike is not suitable. You

Looking forward to the new firmware! I currently have my own custom version that uses the CLK0 BFO and I can't keep up with Allard's new features :) I run my LO at 19MHz and images have been greatly