开云体育

Wanted to share an update with the group as I've made multiple posts over the past year regarding BCI, filters, music, etc.? I finally did complete and install a BCI filter.? After having the uBITX

I did and while I don't know exactly what they should be (and too lazy atm to calculate) but all voltages around Q10/11/12 looked reasonable for npn transistors - good idea t check the Q30 etc group -

Check R18/R38 and see you get voltage at the Q10/Q30 collector. Raj

See how your audio is with headphones. With a full size 40 meter dipole, loud broadcast signals on high end of band should blast your ears. For weak signals, even with audio agc, we must crank up the

mlucia, Have you replaced the Nano when you did the firmware upgrade?? If so, then all of the calibration data is on the original Nano.? You will need to redo the calibration per Ashhar Farhan's

I've read everything I could find in this group about low audio, and frankly don't know if what I am seeing is truly a problem or not. Let me elaborate please.... With the original raduino and

I now added English subtitles to make it understandable for more people! Enjoy. Best regards, Chris PA3CRX

answering myself - it worked removing the R2 and cutting the 17 and 18 to the radio. ; )

If I just remove R2 in the raduino and cut the connections 17 and 18 to the radio, it should be fine, right?

Just a quick note of thanks for a great product and the new firmware (the only ver I've used) The response to turning the encoder knob is lightning fast! What a great mod

btw, same applies to * Pin 5 (Orange), A3, PTT should I disconnect anything from the ubitx, in order not to throw 5V to the mic input jack when I set the pin to 5V (connected to a computer)? Thanks,

Hi everybody, I want to use A6 (Pin 2 / Blue) of the ubitx v6 header, but I realized there is a voltage in there, as it is originally used for the CW keyer. All the other pins I'm already using for

Anyone in the US needing or wanting an HF Signals Antuino? I have one surplus to my needs that I'd like to sell.? Due to shipping restrictions these days, I can only ship to US locations, so that's

Thanks.

Hi Dave, I built one if these ?13 MiniPAs. After playing around with drive and bias, frying a set of mosfets, adding a keying circuit, LPF, heatsink, fan and adding a third resistor, it works

Hello, Do try N8ME's firmware with vu3gao mods. File has been uploaded at : /g/BITX20/files/uBITX_6_N8ME_2_VU3GAO_Mods.zip 73s, Nitin William

The following files have been uploaded to the Files area of the [email protected] group. * /uBITX_6_N8ME_2_VU3GAO_Mods.zip ( /g/BITX20/files/uBITX_6_N8ME_2_VU3GAO_Mods.zip ) *By:*

Dear Balls,No attachment about modification found. Please send attachment again. Tnx n 73 de VU2SMM..Rajendran wrote:

One good way to increase power of ubitx without fiddling with ubitx is to use an external attenuator and an cost effective linear amp WA2EBY d sign which gives 40 watts . We are about to begin sales

Mark,Im using your software on my ubitx v6.1. All i can say is its flawless for me. love the tuning rates that can be changed and the display refresh rate after switching to something else. In my book