开云体育

The desktop icon is created by copying a file with .desktop extension in the folder/home/pi/Desktop. That file is already in the /home/pi/sbitx folder. 1. Press ctrl-alt-T to open the terminal. 2.

Please let us know how that works out. I've wanted to do the same thing to mine. Max

Wasn't there some sort of problem doing that? Capacitance between the heat sink and the IFR510 maybe? I vaguely remember some sort of issue doing that. Max

Can both IRF 510s be mounted to one heatsink if mica insulators are used? I’m thinking about doing a separate 24v supply to the finals. John N4HNO

The red line on the spectrum display is controlled with the pitch control. That marks the cw/rtty/psk31 decoder's central frequency.

Dear Ashhar, I was able to scale the part to 110% of the stl file you send me and the nuts fit perfectly.? CURA will allow you to scale the part before you slice it.?? So, it took a couple of tries

Dear Dean, On the other? PTO stl files I had to increase the part by 10% on all dimensions.??? Now the nuts fit perfectly.?? In CURA you can arbitrarily increase or decrease a parts size by a

Pete - exiting the sbitx application and stopping fldigi, then restarting sbitx will often make the ?? question marks go away.While sbitx is running, use Alt-Tab to switch over to fldigi to see if the

On second thought, I'm not sure I am correct as it seems hard to make it decode under either code with much reliability. So please disregard until you have nothing better to work on. ;-) My internal

put it in clear epoxy and sell it as modern art?!? dg9bfc sigi Am 03.09.2022 um 16:15 schrieb barry halterman:

Good day Goody, Just want to report that under the latest and current version of your code the CW decoder does not work. Just lots of random letters and ? marks no matter how carefully I tune. I

Thanks Howard

Try this one?Bourns PEC11R-4020F-S0012?Mouser has plenty in stock, only $2.68 each. Max KG4PID

Want to trade? I'm serious. Mine is smooth but I think I'd like one that has the detents. My hands shake a lot and I have a hard time sometimes getting the frequency I want. There was a Bourns

Glad to hear, David. I just picked up a second one an am trying some other mods - minimally a Sotabeams DSP to see how it compares to the Hi-Per-Mite filter. ?The DSP has an LED for when you are in

Brian, yes. I have been thinking that I might have a bad J310. Ashhar, here are some readings from my build. The VFO RF voltage into the first mixer is 2.4Vp-p. Disabling the first makes no difference

I just got a second uBitx V6 and unlike my earlier one, the encoder has steps. Any suggestions about a smooth encoder replacement? ?I don't need the push switch as I'm using N8ME firmware. Tnx 73

Dean, looking good.. If you seem to have some extra play between the screw and nut, wrap the screw with a layer of Teflon pipe thread tape. It takes some of the wobbling out. Sent from Mail for

*How to Easily Create Desktop Shortcuts on Raspberry Pi OS? * https://raspberrytips.com/desktop-shortcuts-on-raspberry-pi/ -- Gyula HA3HZ

Scaling up by 10% worked perfectly.? Nice snug fit - easily able to insert the nut with fingers. Now to wind it up and test! 73, Dean KK4DAS