开云体育

My experience so far is that 32 GB is fine if you are an end user who doesn't build their own software, 64 GB may be helpful if you build a lot of code from source, and 128 GB or more is helpful if

I found a case on

Joe - please see message /g/BITX20/message/107999 73; Steve, N3SB

I've got my new sbitx today, the only issue I have so far is the wrong system time: root@sbitx:/home/pi# timedatectl status Local time: Thu 2024-01-18 19:55:35 CET Universal time: Thu 2024-01-18

Yes. I am listening now on the V3, 100hz BW and can hear the signal for 500hz up and down as I tune. Barry Sent from Mail for Windows Sent: Thursday, January 18, 2024 1:28 PM To:

Have you tried it on v3? I use 100 Hz all the time on CW, they work well.

I have noticed with my sbitx the bandwidth setting below 1000khz has little overall effect. For instance, with the control set to 50hz, the BW is actually 500hz. With a setting of 400 hz, the actual

Hi Evan, I connected the AUDIO INPUT to the TP21 and the LDR to the VOL-HIGH: AGC is working very well! Many thanks to everybody for the support! Francesco, I2MKS, Milano, Italy

Hi gang - (looking at you Rafael) I had hoped to be able to show a vide of my homebrew SBITX happily receiving SSB, FT8, and CW but alas no audio is getting throught the codec. My analog receiver is

My sBIT (second hand) came with a couple of batteries.? As I am not very familiar with lipo batteries, I did a little bit of checking.? According to a local hobby shop that primarily handles "toys"

Hi John, A Nano that has been plugged in backward would not work at all.? It would not drive the display, even after being unplugged and put correctly. The 5 volts on all three pins on the same

Gordon, you are a real treasure! KI4QCK Allen Hill

After a day or so of pre-education, we did the full training of the 10th and 11th grade AP Precalculus students today on the sBitx transmitter and sBitx receiver with code modifications that allow

Hi Evan,Thank you for your response. This is? the part that does not make sense to me.Testing the three pins on the encoder to ground (with the power off) show no continuity. Measuring all three

Evan, Thanks. It's my stupidity, because I'm stuck with an old pc with win7-32 and it doesn't like newer versions of browsers. In order to avoid conflicts, I reverted to an earlier version of the

Hi John, Can you verify that you have a ground connection to the encoder?? Check on the center pin of the three pins on the side.? The encoder works by grounding the lines to the Raduino. All of

Hello, I recently received a V6 from a silent key. The rig seems to work fine, except the VFO encoder (either tuning or push in) does not work. No change in frequency when the encoder is turned. I

Gyula, Does this link help? https://sourceforge.net/p/wsjt/mailman/wsjt-devel/thread/5643D336.1070108@.../ 73 Evan AC9TU

Just a heads-up - my only recommendation is to remove the top bar of the window manager, as the Farhan software has a bug which is exposed when the top bar is present (a resize is triggered when

I think it's easier if I copy the content of the conversation. Because I don't see a correct link now either. -- Gyula HA3HZ