开云体育

Evan, Thank you for the update 73, Robert AG6LK

Thanks! The circuit is on https://github.com/afarhan/bitx23

Thank you Farhan!? I'm going to give it a try.? I have a Pi 3B and Adafruit 7" touch diosplay.? Downloading the sbitx 2 disk image now - see if it works natively on the 3B - else I'll build from

Dean, VU2IIA has done it https://youtu.be/ekm5IdcqR8o You have to : 1. Change the tuning code to work with dual conversion (it is in sbitx.c) 2. Add a WM8731 codec (I can send you a board). 3. Change

I saw Farhan on his way in to FDIM - he mentioned the possibility of converting a ubitx to work with the sbitx software.? ?Has anyone tried it and what was involved? 73, Dean KK4DAS

Great presentation today at FDIM

Tnx Gyula I just made a suggestion as i don't have the Sbitx 73 to all

Get the new sd card image and try it out. This should work anyway. You don't have to bother with most other stuff. The iambic keying is still iffy, but the rest are very usable. -

https://github.com/xaratustrah/dolphinlog/blob/main/dolphinlog/qsodata.py > @staticmethod def export_adif_adi(db_filename, adi_filename): try: ADIF_VER = '3.0.4'

OK, many thanks Gyula. -P #5

Lawrence, I suggest you consider what was written in message #101717 ( /g/BITX20/message/101717 ) as a solution. Petr, I didn't use thermal paste, even though it's in the

I know there has been a lot going on behind the scenes, and a large focus on getting the V2 operating properly.? I am hoping you all can help me with my V1 DE.? I have performed what I believe are

Dan, I've received all the pictures - pretty neat the way it all comes out. There's a link to a download in the message below. If you could link to it and then download it and compile it, it might

Gyula, I am going to open the radio and following your procedure and mod too. Did you used the heat conductive paste for better heat dissipation? -P #5

A spring or star washer should stop the screws from becoming loose

The following files and folders have been uploaded to the Files area of the BITX20@groups.io group. * /SBITX V2/Firmware/Update_how to/Sbitx disk image for software v2.1.pdf (

Hi Scott, I read your email thread and learned about the SWR/Pwr sensor installation process.? I am waiting for the parts to be delivered and working on other projects.? It is not a priority for me

Hi Nanak - I am having a very similar problem with the sBitx_v2. I can see some noise in the waterfall display if I raise the rf gain but no stations at all. Even very strong ones. The noise level

Hi Evan, I think you may be referring to my experience in adding the 60dnm.com 100W SWR bridge to my V1.? I would say 90% of my issues were self induced.? If you were to add the sensor to your V1

thanks!