开云体育

On the Site it says ' The Low Pass Filter kit can handle at least 10W safely' so it will.

Ask Hans, if not ask the right capacitors that handle that power.

I extremely disagree! As a hobbyist we have NO schedules and NO budget constraints! There is no reason not to produce clean code. It's called being LAZY. There are a lot of people that look at our

Joe, Not sure that the QRPLabs’ LPFs will handle the uBitX power capabilities.? Guy WB7SZI

MRM, Depends on how the testing turns out ;o) Haven't decided yet. Anyone can order boards with the Gerbers and share with friends using the "$2 for 10 boards + postage" deals several board vendors

I built the probe per N5ESE's website and it worked. I was able to trace RF during TX to C80, but nothing at C84. Turned out there was no continuity between the relay K1 pin 1 and R84 on TX.? I fixed

You gonna bake a batch of boards or is this left to the reader? Sent: Wednesday, August 29, 2018 3:08 PM To: [email protected] Subject: Re: [BITX20] uBitx Unfiltered I have Gerbers for 2 different LPF

I have Gerbers for 2 different LPF relay boards. Both support the Hans Summers plug-in QRP Labs LPFs. One has space for 4x LPFs like the existing uBITX LPFs and uses smaller Omron DPDT relays and the

Perhaps I'm just old and in the way, but this "char literal to char" warning seems a bit much, If the compiler saw where I was later assigning a different value to that char, then it can complain And

Thanks, Gordon! ...which indicates to me that it's meant to be a 'hat' above or 'mat' below the main board, and populating it wrong-side to install upside-down is itself wrong. .. but that's just my

In one case, I've worked on some of the Google TensorFlow 开云体育 code. Was the Google code free of warnings, no, not at all.? Often the C++ complier introduces new warnings that are due to

I agree that warnings and errors in released code detract from the apparent product quality. In one of my jobs I had to deal with 90,000 warnings in one release. Everyone told me that they were

Kevin and MadRadioModder The Raduino seems to have brought some of us old geezers out of hiding after 10 to 30 years of non-coding. Since some of us learned our C-language from Dennis Ritchie and the

No disrespect intended, but you do get paid for what you do. This is a hobby, so in the words of Clint E. “Go ahead, fix my code…”. Sent: Wednesday, August 29, 2018 1:31 PM To: [email protected]

Hi Fabian, I must have missed your new question. Will you repeat it? 73, Bill KU8H -- bark less - wag more

As a professional software developer I'm required to deliver code that has no errors and no warnings.? I don't understand why people don't hold themselves to the same standard when releasing software

Hello again :-)? Sorry for asking again,.. But are there no answer for the new message that i wrote?? I am happy for read some new help, so we can work together for the ubitx and i'm hope it works

Art..thanks! I had tried reducing the grid by a few pixels but that didn’t help. However reducing it by almost a half did the trick. It does compile and I’ve successfully loaded it onto my 3.5

I would say LPF for 60-30-17-10meters bands and eventually 160m if you would like to use this band too (I think it could transmit as well on 160m)

for Hans LPF's try http://www.qrp-labs.com/lpfkit.html Alan