¿ªÔÆÌåÓý

Re: Nextion 3.2 for CEC 1.097 #ubitx


John Lauber
 

¿ªÔÆÌåÓý

?

Art..thanks!? I had tried reducing the grid? by a few pixels but that didn¡¯t help.? However reducing it by almost a half did the trick.? It does compile and I¡¯ve successfully loaded it onto my 3.5 display.? There are some bugs in at least one of? the pages, but it appears to be close to a workable product.? Thanks again to Nikos and you¡­

?

73

John

?

From: [email protected] <[email protected]> On Behalf Of Art Olson
Sent: Wednesday, August 29, 2018 10:00
To: [email protected]
Subject: Re: [BITX20] Nextion 3.2 for CEC 1.097 #ubitx

?

John

?

Welcome to learning - hi hi

I am stumbling through also

?

If you reduce the grid size on that page say by half for x and y it will compile. I don¡¯t remember the I¡¯d number but it appears in the upper left corner in the grid. Select it an the attribute page will come up. Go to the bottom and change the h and w values

?

Lots of other things need fixing but am encouraged others are working this also.?

?

Art N2AJO?


On Aug 29, 2018, at 12:30 PM, John Lauber <jlauber@...> wrote:

Hi, Nikos¡ªthank you.? Did you try to compile this?? I¡¯ve tried it and get the following output:

?

Global Memory:1496

Total size of picture:2,483,702

Total size of font:033,225

Page:px Memory Occupied:1496+1140=2636

Page:pm Memory Occupied:1496+244=1740

Page:pf Memory Occupied:1496+764=2260

Page:pc Memory Occupied:1496+504=2000

Error: Page:padc Error! Memory overflow:1496+2848=4344

Error: Compile failed! 1 Errors, 0 Warnings,

?

Looking at page padc, I can¡¯t see what the problem is.? I tried reducing the size of the waveform by a few pixels, and that didn¡¯t help.? I¡¯m really stumbling my way through this Nextion editor, so am operating largely in the blind!? Any ideas?

?

73

WI6P

John

?

From: [email protected] <[email protected]> On Behalf Of SV9CVJ Nikos
Sent: Wednesday, August 29, 2018 07:26
To: [email protected]
Subject: Re: [BITX20] Nextion 3.2 for CEC 1.097 #ubitx

?

Hi John
I tried to do something on editor but I'm not sure about the result , pages 3,4,7,8,9,10 .

Nikos

Join [email protected] to automatically receive all group messages.