开云体育

sounds nice.... so far i have put an inverted V. Very good RX. However no stations can hear me.... looks like a bad tuning or high swr issue so far i have not burnt the finals :D

Look up QRPGuys on Google - they have some EFHW kits - might be a help. Gerry Sent by the Thunderbird

From QST: "Wire Antennas for the Beginner" https://www.arrl.org/files/file/Technology/tis/info/pdf/0683033.pdf Also: "Antennas - The Easy

Well, if you give me a few days and contact me privately at djmalak2k6 at gmail. I can look at the api. I just want a way to see what they want so I can advise you of the best solution. Hosting will

Simian Here i use a small 2 element beam on 20,15,10m and verticals on the other bands, plus I sometimes use an end fed halfwave (EFHW) .? a dipole or EFHW certainty is a good antenna, if space is

Chris, Thanks for stepping up and offering to help.? I started looking at the API's available and they now all require a billing account to access.? While I am happy to keep renewing the domain I am

I’m a cyber security major with a masters degree. If an api exists, I would be happy to work on this. I’m disabled so time is not an issue for me. Chris KF4FTR

Hi, Got ubitx6 from hfsignals. Pretty happy with it. Very nice piece of technology I must say. Just wanted to understand with such qrp on voice, how far have you reached (considering present band

Excellent! [email protected]> wrote:

Right, I did some DC measurements as follows: Oscillator Transistor E-7.02V B-5.81V C-11.91V Amplifier Transistor E-2.94V B-3.61V C-11.84V Next I checked the scope probe and scope settings, Ashhar

in fact.. there's a step missing, as well. ?-- after being logged in to your google account and viewing the bitxmap page, you next click the [Edit] link immediately below where the link to the

...should never assume.?? ;) perhaps the linked directions might be amended to include this vital information, so the next person doesn't have to discover it the long way.

I'm assuming you do not have a google account.? We later figured out that even with the permissions set as open as possible you need a google account to post.? That is one unfortunate issue with the

We are discussing the rf two tone generator. The emitter should show at least 500mv of RF. I still suspect measurements. It is like this, the oscillations need the amplifying device to saturate for

I think the missing step is :You need to be logged on to your Google Account!

I think part of the problem may be in the provided instructions, specifically this step: click add to map at the bottom of the box that pops up ...there is no "add to map", nor is there any box that

I would think it depends on its purpose -- is it made for feeding a mixer or feeding a mic amp? The one I was referring too was the one on his site that was available from the above link and was for

Hi, I would think it depends on its purpose -- is it made for feeding a mixer or feeding a mic amp? M

Looking at the schematic of the output combiner, are you really using 150 ohm resistors for a 50 ohm system? Every similar output combiner I have ever build for a 50 ohm system has 50 ohm

Are you sure your oscillascope is not on 10x vs 1x? It seems to be exactly 10 times down. Check some dc voltages with the scope and the bandwidth settings too.