Re: uBitx start problem

Raj vu2zap · 2018-06-16T05:23:12-07:00

Typo: you have to solder a 4.7K without the resistor it will startkeying the transmitter as you described. At 16/06/2018, you wrote:

Raj vu2zap Member Profile All Messages By This Member #52115 Typo: you have to solder a 4.7K without the resistor it will start keying the transmitter as you described. At 16/06/2018, you wrote: toggle quoted message Show quoted text I used a Sunil case with a separate board where all the jacks and the 4.7k resistor are. So I will apply your advice. Thank you again for this valuable info. 73 QRO from Gilles F1BFU 2018-06-16 13:09 GMT+02:00 Raj vu2zap < rajendrakumargg@...>: Gilles, It is because you have soldered a 4.7K resistor across two pins of the Raduino wires?? blue and green. Suggest you do it across the back of the Raduino board! Please see the wiring diagram/instructions. Raj

Join [email protected] to automatically receive all group messages.

开云体育