开云体育

uBitx start problem

#ubitx-help

F1BFU - Fr - 79 All Messages By This Member #52106 I just finished my uBitx. At the start, the display lights up with "CW 7.150.00" and the speaker only transmits Beep Beep Bip !! Ancune possible action with the encoder (Push button or rotation). Someone has an idea because I have not found anything on the forum that can allow me to move forward. The audio level can be adjusted with the potentiometer. Thanks for your help Gilles - F1BFU
Raj vu2zap Member Profile All Messages By This Member #52107 Gilles, It is because you have soldered a 4.7K resistor across two pins of the Raduino wires blue and green. Suggest you do it across the back of the Raduino board! Please see the wiring diagram/instructions. Raj toggle quoted message Show quoted text At 16/06/2018, you wrote: I just finished my uBitx. At the start, the display lights up with "CW 7.150.00" and the speaker only transmits Beep Beep Bip !! Ancune possible action with the encoder (Push button or rotation). Someone has an idea because I have not found anything on the forum that can allow me to move forward. The audio level can be adjusted with the potentiometer. Thanks for your help Gilles - F1BFU
F1BFU - Fr - 79 All Messages By This Member #52113 I used a Sunil case with a separate board where all the jacks and the 4.7k resistor are. So I will apply your advice. Thank you again for this valuable info. 73 QRO from Gilles F1BFU 2018-06-16 13:09 GMT+02:00 Raj vu2zap <rajendrakumargg@...>: toggle quoted message Show quoted text Gilles, It is because you have soldered a 4.7K resistor across two pins of the Raduino wires? blue and green. Suggest you do it across the back of the Raduino board! Please see the wiring diagram/instructions. Raj At 16/06/2018, you wrote: >I just finished my uBitx. At the start, the display lights up with "CW 7.150.00" and the speaker only transmits Beep Beep Bip !! Ancune possible action with the encoder (Push button or rotation). >Someone has an idea because I have not found anything on the forum that can allow me to move forward. The audio level can be adjusted with the potentiometer. > >Thanks for your help > >Gilles - F1BFU
Raj vu2zap Member Profile All Messages By This Member #52115 Typo: you have to solder a 4.7K without the resistor it will start keying the transmitter as you described. At 16/06/2018, you wrote: toggle quoted message Show quoted text I used a Sunil case with a separate board where all the jacks and the 4.7k resistor are. So I will apply your advice. Thank you again for this valuable info. 73 QRO from Gilles F1BFU 2018-06-16 13:09 GMT+02:00 Raj vu2zap < rajendrakumargg@...>: Gilles, It is because you have soldered a 4.7K resistor across two pins of the Raduino wires?? blue and green. Suggest you do it across the back of the Raduino board! Please see the wiring diagram/instructions. Raj

Previous Topic Next Topic