Re: FTM-500 - Transmit from APRSIS32?
That's probably the route I'll go, was just hoping that the TNC in the FTM-500 was usable as, well, a TNC.
|
I am unable to verify the callsign you have supplied
On Fri, Feb 14, 2025 at 11:11?AM Masashi Akiyama via <jp1itn= [email protected]> wrote: ?Please kindly provide passcode for?APRSISCE/32??
Thank you for your kind support.
JN6JWN/Masashi Akiyama
--
JN6JWN Masashi Akiyama
--
73 de Steve Wilson KF6WAX, APRSISCE32, ADMIN/MODERATOR
|
?Please kindly provide passcode for?APRSISCE/32??
Thank you for your kind support.
JN6JWN/Masashi Akiyama
-- JN6JWN Masashi Akiyama
|
Re: FTM-500 - Transmit from APRSIS32?
It was specifically NOT possible with the FTM-350.
Hal
N3YX
toggle quoted message
Show quoted text
On Feb 13, 2025, at 4:08?PM, Matt L via groups.io <mattlaudato@...> wrote:
curious if others know whether this is possible (and/or with earlier radios in the FTM family).
|
Re: Passcode for APRSISCE/32
|
Christopher J. Vezeau
W1CJV
Need a passcode for APRSISCE/32
Thanks
Sent from Proton Mail Android
|
Re: FTM-500 - Transmit from APRSIS32?
The Yaesu line if radios will only out put Aprs. There is no access to the internal tnc. A work around is to have an external tnc attached on the data port and use that. This is what I'm doing with my home station. Aprsis32> TT4> FTM-400. The
TT4 is locked in kiss and does the digipeating for the station. Aprsis32 handles gate traffic in and out. The 400s internal tnc is still on and still recieves packets and can transmit too.?
KB3KBR Greg. Sent from my Samsung Galaxy smartphone.
toggle quoted message
Show quoted text
-------- Original message --------
From: "Matt L via groups.io" <mattlaudato@...>
Date: 2/13/25 19:31 (GMT-05:00)
Subject: Re: [APRSISCE] FTM-500 - Transmit from APRSIS32?
Putting thee data in thine mic jack!
|
Re: FTM-500 - Transmit from APRSIS32?
Putting thee data in thine mic jack!
|
Re: FTM-500 - Transmit from APRSIS32?
Sorry for the spelling fat fingers. lol
Jeff
toggle quoted message
Show quoted text
On Feb 13, 2025, at 6:23?PM, Jeff KB5NMB via groups.io <kb5nmb@...> wrote:
? Have you tried putting thee data and ptt theu the mic jack? Just a thought.
Jeff kb5nmb On Feb 13, 2025, at 6:08?PM, Matt L via groups.io <mattlaudato@...> wrote:
? Been experimenting with APRSIS32 and my FTM-500, mixed results. Using the standard Yaesu cable SCU-56.
- I can get data from the transceiver into APRSIS32. That is, when I configure and enable a port for the FTM-500, and run APRS on the radio, the APRS traffic is streamed into APRSIS32
- I cannot seem to transmit via RF from APRSIS32 to the FTM-500. The packets fall onto the floor as they say.
- Similar when I connect the FTM-500 to my PC and use Processing (processing.org) to open up a serial connection - I can stream data in but not transmit. This doesn't surprise me too much as I suspect that the write handshake is not being handled correctly by the Processing Serial object, but I need to investigate this more. Also I assume but need to verify that the oddball way that the FTM-500 formats APRS messages is involved as well.
?
Fairly sure that I'm formatting packets correctly from APRSIS32. Not looking for deep dive help necessarily, but curious if others know whether this is possible (and/or with earlier radios in the FTM family).
?
?
|
Re: FTM-500 - Transmit from APRSIS32?
No, and not really interested in that approach. But thanks.
?
- Matt
KC!VXV
|
Re: FTM-500 - Transmit from APRSIS32?
Have you tried putting thee data and ptt theu the mic jack? Just a thought.
Jeff kb5nmb
toggle quoted message
Show quoted text
On Feb 13, 2025, at 6:08?PM, Matt L via groups.io <mattlaudato@...> wrote:
? Been experimenting with APRSIS32 and my FTM-500, mixed results. Using the standard Yaesu cable SCU-56.
- I can get data from the transceiver into APRSIS32. That is, when I configure and enable a port for the FTM-500, and run APRS on the radio, the APRS traffic is streamed into APRSIS32
- I cannot seem to transmit via RF from APRSIS32 to the FTM-500. The packets fall onto the floor as they say.
- Similar when I connect the FTM-500 to my PC and use Processing (processing.org) to open up a serial connection - I can stream data in but not transmit. This doesn't surprise me too much as I suspect that the write handshake is not being handled correctly by the Processing Serial object, but I need to investigate this more. Also I assume but need to verify that the oddball way that the FTM-500 formats APRS messages is involved as well.
?
Fairly sure that I'm formatting packets correctly from APRSIS32. Not looking for deep dive help necessarily, but curious if others know whether this is possible (and/or with earlier radios in the FTM family).
?
?
|
Re: FTM-500 - Transmit from APRSIS32?
I vaguely recall reading about that, somewhat curious if others have found a clever way around this.?
?
Matt
KC1VXV
|
Re: FTM-500 - Transmit from APRSIS32?
If I recall correctly Yeasu doesn't allow access to the TNC for transmit from APRSISCE.
Adam
KC2ANT
-------- Original Message -------- On 2/13/25 7:08 PM, Matt L via groups.io wrote: Been experimenting with APRSIS32 and my FTM-500, mixed results. Using the standard Yaesu cable SCU-56.
- I can get data from the transceiver into APRSIS32. That is, when I configure and enable a port for the FTM-500, and run APRS on the radio, the APRS traffic is streamed into APRSIS32
- I cannot seem to transmit via RF from APRSIS32 to the FTM-500. The packets fall onto the floor as they say.
- Similar when I connect the FTM-500 to my PC and use Processing (processing.org) to open up a serial connection - I can stream data in but not transmit. This doesn't surprise me too much as I suspect that the write handshake is not being handled correctly by the Processing Serial object, but I need to investigate this more. Also I assume but need to verify that the oddball way that the FTM-500 formats APRS messages is involved as well.
?
Fairly sure that I'm formatting packets correctly from APRSIS32. Not looking for deep dive help necessarily, but curious if others know whether this is possible (and/or with earlier radios in the FTM family).
?
?
|
FTM-500 - Transmit from APRSIS32?
Been experimenting with APRSIS32 and my FTM-500, mixed results. Using the standard Yaesu cable SCU-56.
- I can get data from the transceiver into APRSIS32. That is, when I configure and enable a port for the FTM-500, and run APRS on the radio, the APRS traffic is streamed into APRSIS32
- I cannot seem to transmit via RF from APRSIS32 to the FTM-500. The packets fall onto the floor as they say.
- Similar when I connect the FTM-500 to my PC and use Processing (processing.org) to open up a serial connection - I can stream data in but not transmit. This doesn't surprise me too much as I suspect that the write handshake is not being handled correctly by the Processing Serial object, but I need to investigate this more. Also I assume but need to verify that the oddball way that the FTM-500 formats APRS messages is involved as well.
?
Fairly sure that I'm formatting packets correctly from APRSIS32. Not looking for deep dive help necessarily, but curious if others know whether this is possible (and/or with earlier radios in the FTM family).
?
?
|
|
|
Most likely the testhost.apk?
that is the one that I and an unknown number of other people are currently running.
On Thursday, February 6th, 2025 at 10:06, KJ4DXK via groups.io <kj4dxk@...> wrote:
I found testhost.apk and aprsismo.apk, which is likely newer?
Paul
This is amazing news.
For informational purposes only, APRSISDR became APRSISMO, and the Testhost link is the Dev Version of APRSISMO and is the most recent version of that.
Lynn was working toward a cross platform mobile version, I know it works on Android, but I'm not sure about others.
On Thursday, February 6th, 2025 at 00:33, JeffH - W4JEW - APRS Foundation via <jeffh= [email protected]> wrote:
Paul,
I am speechless - thank you so much for choosing to host your father's source code on the APRS Foundation's GitHub page.
Your father was one of the finest people I have ever met, and I'm glad to have spent the time with him that I did. I learned more about APRS from him than anyone else, and I learned so much about looking at things from another perspective that I will never forget.
Plus - I am so happy to have finally met you! You're a chip off the old block! And I mean that in the most sincere way that I can express.
For anyone looking for discrete links to each of the repositories, they are as follows:
And to everyone who's had the wonderful experience of using Lynn's contributions to ham radio - I hope you continue to enjoy using them as much as I do.
Best Regards and 73,
-JeffH
---
Jeff Hochberg - W4JEW
President
APRS Foundation Inc.
|
I found testhost.apk and aprsismo.apk, which is likely newer?
Paul
This is amazing news.
For informational purposes only, APRSISDR became APRSISMO, and the Testhost link is the Dev Version of APRSISMO and is the most recent version of that.?
Lynn was working toward a cross platform mobile version, I know it works on Android, but I'm not sure about others.?
On Thursday, February 6th, 2025 at 00:33, JeffH - W4JEW - APRS Foundation via <jeffh= [email protected]> wrote:
Paul,
?
I am speechless - thank you so much for choosing to host your father's source code on the APRS Foundation's GitHub page.?
?
Your father was one of the finest people I have ever met, and I'm glad to have spent the time with him that I did. I learned more about APRS from him than anyone else, and I learned so much about looking at things from another perspective that I will never forget.
?
Plus - I am so happy to have finally met you! You're a chip off the old block! And I mean that in the most sincere way that I can express.
?
For anyone looking for discrete links to each of the repositories, they are as follows:
?
?
And to everyone who's had the wonderful experience of using Lynn's contributions to ham radio - I hope you continue to enjoy using them as much as I do.
?
Best Regards and 73,
?
-JeffH
?
---
Jeff Hochberg - W4JEW
President
APRS Foundation Inc.
?
?
|
Re: Need a passcode for APRSISCE/32 Bob Bianca KN7E
|
This is amazing news.
For informational purposes only, APRSISDR became APRSISMO, and the Testhost link is the Dev Version of APRSISMO and is the most recent version of that.?
Lynn was working toward a cross platform mobile version, I know it works on Android, but I'm not sure about others.?
On Thursday, February 6th, 2025 at 00:33, JeffH - W4JEW - APRS Foundation via groups.io <jeffh@...> wrote:
Paul,
?
I am speechless - thank you so much for choosing to host your father's source code on the APRS Foundation's GitHub page.?
?
Your father was one of the finest people I have ever met, and I'm glad to have spent the time with him that I did. I learned more about APRS from him than anyone else, and I learned so much about looking at things from another perspective that I will never forget.
?
Plus - I am so happy to have finally met you! You're a chip off the old block! And I mean that in the most sincere way that I can express.
?
For anyone looking for discrete links to each of the repositories, they are as follows:
?
?
And to everyone who's had the wonderful experience of using Lynn's contributions to ham radio - I hope you continue to enjoy using them as much as I do.
?
Best Regards and 73,
?
-JeffH
?
---
Jeff Hochberg - W4JEW
President
APRS Foundation Inc.
?
?
|
Re: Need a passcode for APRSISCE/32 Bob Bianca KN7E
toggle quoted message
Show quoted text
Hello,
I am Bob Bianca KN7E, may I have a passcode for APRSISCE/32.
Thank You
?
Email to request code is being rejected.
--
73 de Steve Wilson KF6WAX, APRSISCE32, ADMIN/MODERATOR
|
Bob - KN7E