Auto following?
I use aprsisce pretty effectively as an igate (with limited gating of internet to RF for really local stations) but regularly new windows open and I find myself tracking maybe four or five stations
By
Carl
·
#38177
·
|
Re: Help needed setting up FTM-300 with APRSIS32
Apologies for the misunderstanding Greg. I got a passcode from https://n5dux.com/ham/aprs-passcode/ using M0NMA as the CallSign and put ?that into APRSIS. After a period when it says ‘APRSIS
By
Steve marsh (M0NMA)
·
#38176
·
|
Re: Help needed setting up FTM-300 with APRSIS32
To be clearer the ssid is not what I was talking about, the pass code is -1 on first run and needs changed.
KB3KBR Greg. Sent from my Samsung Galaxy smartphone.
By
Greg Depew
·
#38175
·
|
Re: Help needed setting up FTM-300 with APRSIS32
Thanks - I did get a passcode from one of the websites, but I suspect it may be invalid do have requested one through here.
I used -1 for my mobile handy as I am already using 10,9 and 7 and wanted
By
Steve marsh (M0NMA)
·
#38174
·
|
Re: Help needed setting up FTM-300 with APRSIS32
32 is automatically an igate out of the box but you have to have a valid pass code to send to the internet. If it's -1 then you need to request one. -1 is for recieve only on the internet.
KB3KBR
By
Greg Depew
·
#38173
·
|
Help needed setting up FTM-300 with APRSIS32
I am new to APRS and am trying to set up my FTM-300 so that it acts as an igate by feeding RF spots to ARRSIS and also so these are visible on aprs.fi
My FTM-300 is configured as M0NMA-9
APRSIS is
By
Steve marsh (M0NMA)
·
#38171
·
|
Re: Forgot Passcode
Passcode sent offlist
[email protected]> wrote:
--
*73 de*
*Steve Wilson*
*KF6WAX, APRSISCE32, ADMIN/MODERATOR*
By
Steve
·
#38170
·
|
Forgot Passcode
MITCHELL MELLEN
KJ4UBX
By
Mitch Mellen
·
#38169
·
|
Re: APRSISCE/32 Passcode
Replied off list
73 de
Steve Wilson
KF6WAX, APRSISCE32, ADMIN/MODERATOR
[email protected]> wrote:
--
*73 de*
*Steve Wilson*
*KF6WAX, APRSISCE32, ADMIN/MODERATOR*
By
Steve
·
#38168
·
|
APRSISCE/32 Passcode
Good morning,
Been years but finally reinstalled *APRSISCE/32* on this computer. I
think my passcode is 9347 is this correct? If not can I obtain it again so
that my station will show
By
Jeffrey
·
#38167
·
|
Re: Passcode Request
Sent off list
[email protected]> wrote:
--
*73 de*
*Steve Wilson*
*KF6WAX, APRSISCE32, ADMIN/MODERATOR*
By
Steve
·
#38166
·
|
Passcode Request
Please provide a passcode for */William E. Diamond/*, callsign/*K6KRQ*/.
--
*/Bill Diamond - K6KRQ/*
*/Sacramento, CA/*
By
Bill Diamond
·
#38165
·
|
Re: FTM-500 - Transmit from APRSIS32?
That's probably the route I'll go, was just hoping that the TNC in the FTM-500 was usable as, well, a TNC.
By
Matt L
·
#38164
·
|
Re: passcode request
I am unable to verify the callsign you have supplied
[email protected]> wrote:
--
*73 de*
*Steve Wilson*
*KF6WAX, APRSISCE32, ADMIN/MODERATOR*
By
Steve
·
#38163
·
|
passcode request
?Please kindly provide passcode for APRSISCE/32
Thank you for your kind support.
JN6JWN/Masashi Akiyama
By
jp1itn@...
·
#38162
·
|
Re: FTM-500 - Transmit from APRSIS32?
It was specifically NOT possible with the FTM-350.
Hal
N3YX
By
Hal Mueller
·
#38161
·
|
Re: Passcode for APRSISCE/32
Passcode sent offlist
By
Steve
·
#38160
·
|
Passcode for APRSISCE/32
Christopher J. Vezeau
W1CJV
Need a passcode for APRSISCE/32
Thanks
Sent from Proton Mail Android
By
W1CJV Chris
·
#38159
·
|
Re: FTM-500 - Transmit from APRSIS32?
The Yaesu line if radios will only out put Aprs. There is no access to the internal tnc. A work around is to have an external tnc attached on the data port and use that. This is what I'm doing with my
By
Greg Depew
·
#38158
·
|
Re: FTM-500 - Transmit from APRSIS32?
Putting thee data in thine mic jack!
By
Matt L
·
#38157
·
|