Matthew,
Why not try a DRA-30 from MastersCommunications and use it with
the Soundmodem program (free at UZ7HO - also get the PTT.DLL Zip).
You'll find this set up decodes a bit better than the KPCs. You're
also set to try Vara FM by adding the Vara FM program. Just a
thought from a satisfied user of DRA modules.
73, John N5TIM
On 9/8/2024 12:10 PM, Matthew B Simons
via groups.io wrote:
toggle quoted message
Show quoted text
I need help setting up my KPC3+.
I replaced my TNC that died with another newer KPC3+, I lost
all my programming and internal setup.
?
Is there any out the to assist?
?
Matthew
KK4ZDZ
|
toggle quoted message
Show quoted text
On Sun, Sep 8, 2024, 13:49 Matthew B Simons via <matthew.simons71= [email protected]> wrote: I need help setting up my KPC3+.
I replaced my TNC that died with another newer KPC3+, I lost all my programming and internal setup.
?
Is there any out the to assist?
?
Matthew
KK4ZDZ
|
Give this page a look
Adam KC2ANT?
On Sun, Sep 8, 2024, 1:49?PM Matthew B Simons via <matthew.simons71= [email protected]> wrote: I need help setting up my KPC3+.
I replaced my TNC that died with another newer KPC3+, I lost all my programming and internal setup.
?
Is there any out the to assist?
?
Matthew
KK4ZDZ
|
I need help setting up my KPC3+.
I replaced my TNC that died with another newer KPC3+, I lost all my programming and internal setup.
?
Is there any out the to assist?
?
Matthew
KK4ZDZ
|
Re: Release notes for latest Dev version release of 5 September?
BTW Lynn,
Some sort of History file that shows what changed in each Development Version would be extremely useful and it would also stop complainers from complaining. Hi hi hi!!!
The only detailed history I can find in the Wikidot is a file called Release notes but it is for APRSIS32 dated 1st May 2020. It is now 2024 and we really need some information of what has changed during the past 4 years!
--
73 de Demetre - SV1UY
|
Oh my! I can turn it off!? ?Thanks :/
|
This will not re-enable the suspended TX though will it?
|
Re: Release notes for latest Dev version release of 5 September?
UFB Lynn
--
73 de Demetre - SV1UY
|
Re: Release notes for latest Dev version release of 5 September?
Adam is 100% correct.?? I discovered that I borked the Configure
/ Objects menu when adding the FT8 and JS8Call options that I
inadvertently removed the QRU-supporting options.?? They've been
restored to visibility.
Lynn (D) - KJ4ERJ - Author of APRSISCE
for Windows Mobile and Win32
On 9/7/2024 4:57 AM, Adam - KC2ANT
wrote:
toggle quoted message
Show quoted text
Morning,
I believe the only change was putting the QRU
options back in the configuration menu.
Adam
KC2ANT?
On Sat, Sep 7, 2024, 3:42?AM
Demetre - SV1UY (M0SUY) via <demetre.sv1uy= [email protected]>
wrote:
Hi,
Is there a release note file for the latest development
version dated 5 September 2024?
If yes where can we find it? I checked but I couldn't find
anything at the Wikidot.
Any link would be of great help.
--
73 de Demetre - SV1UY
|
Re: Release notes for latest Dev version release of 5 September?
Morning,
I believe the only change was putting the QRU options back in the configuration menu.
Adam KC2ANT? On Sat, Sep 7, 2024, 3:42?AM Demetre - SV1UY (M0SUY) via <demetre.sv1uy= [email protected]> wrote:
Hi,
Is there a release note file for the latest development version dated 5 September 2024?
If yes where can we find it? I checked but I couldn't find anything at the Wikidot.
Any link would be of great help.
--
73 de Demetre - SV1UY
|
Release notes for latest Dev version release of 5 September?
Hi,
Is there a release note file for the latest development version dated 5 September 2024?
If yes where can we find it? I checked but I couldn't find anything at the Wikidot.
Any link would be of great help.
--
73 de Demetre - SV1UY
|
Yes, it's running on the com port. So far so good! Thanks!
|
And if you are only annoyed by the scroller, you can go to >Configure >Scroller >RF Only and only stations heard over RF will be in that area.
That is my preferred method of viewing the map
?* Map shows all area stations for RF and IF ?* Scroller only shows RF (with DIGI)
Although recently my settings have been >View Symbols >Flight for tracking balloons and other flying objects (no UFOs yet).? Of course they much have a symbol that is defined in the XML as "Flight".
On Saturday, August 17, 2024 at 07:37:34 AM EDT, Lynn Deffenbaugh <kj4erj@...> wrote:
Sure, just uncheck Enables / APRS-IS Enabled which will allow
other Internet activities (like map downloading), but will not
connect to the APRS-IS servers so the only APRS traffic you'll see
must have come from RF.?? Of course, you won't be acting as an
IGate either.
Or if it's just the visual you're after, check and confirm (if
necessary) View / None (this turns off any specific selections you
may have) and then check View / RF / All.?? That window will then
only show stations that have been received via RF and still allow
your instance to act as an IGate.
Of course, if by "not have an internet connection", you actually
mean having NO Internet connection, then you'll be wanting to
pre-download maps for your area of interest and then simply unplug
the Internet or uncheck Enables / Internet Access which tells
APRSIS32 to not use the Internet for anything.?? Of course, either
of these options also means that you're no longer acting as an
IGate either.
Lynn (D) - KJ4ERJ - Author of APRSISCE
for Windows Mobile and Win32
PS.?? See also:
On 8/16/2024 10:15 PM, Chad WS wrote:
Is it possible to not have an internet connection but have a
map downloaded into aprsis and just receive and transmit by RF
rather than internet?
|
Under Windows, I think you need to use the paired COMM port and
make sure you have the D74 BT connection locked into KISS mode.??
Use Simply(KISS) on APRSIS32 because the D74's TNC is different
than earlier Kenwood APRS radios.
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and
Win32
On 8/17/2024 1:55 PM, Chad WS wrote:
toggle quoted message
Show quoted text
I think I figured out the map thing. But anyone have a D74 and
use the bluetooth? I have it paired with the laptop and it works
with winlink but aprsis doesn't seem to pick it up under
bluetooth configuration it's just blank. Thoughts?
|
There are no Google Map options. Check the wiki.
Sent via the Samsung Galaxy S24 Ultra, an AT&T 5G smartphone Get
And would I download something like a google maps app or something and from there how would aprsis access that??
|
I think I figured out the map thing. But anyone have a D74 and use the bluetooth? I have it paired with the laptop and it works with winlink but aprsis doesn't seem to pick it up under bluetooth configuration it's just blank. Thoughts?
|
And would I download something like a google maps app or something and from there how would aprsis access that??
|
Thanks for the help everyone! I'll see if I can configure it! I haven't used this program in over 5 years and just felt like getting back into it. I'd like to be able to go between being online and using it as an iGate and working offline and just get "local"
locations and perhaps send messages through it.?
|
I recommend also disabling "purging" function. That removes map pieces after time.
Best regards,
Fred
Sure, just uncheck Enables / APRS-IS Enabled which will allow
other Internet activities (like map downloading), but will not
connect to the APRS-IS servers so the only APRS traffic you'll see
must have come from RF.?? Of course, you won't be acting as an
IGate either.
Or if it's just the visual you're after, check and confirm (if
necessary) View / None (this turns off any specific selections you
may have) and then check View / RF / All.?? That window will then
only show stations that have been received via RF and still allow
your instance to act as an IGate.
Of course, if by "not have an internet connection", you actually
mean having NO Internet connection, then you'll be wanting to
pre-download maps for your area of interest and then simply unplug
the Internet or uncheck Enables / Internet Access which tells
APRSIS32 to not use the Internet for anything.?? Of course, either
of these options also means that you're no longer acting as an
IGate either.
Lynn (D) - KJ4ERJ - Author of APRSISCE
for Windows Mobile and Win32
PS.?? See also:
On 8/16/2024 10:15 PM, Chad WS wrote:
Is it possible to not have an internet connection but have a
map downloaded into aprsis and just receive and transmit by RF
rather than internet?
|
Sure, just uncheck Enables / APRS-IS Enabled which will allow
other Internet activities (like map downloading), but will not
connect to the APRS-IS servers so the only APRS traffic you'll see
must have come from RF.?? Of course, you won't be acting as an
IGate either.
Or if it's just the visual you're after, check and confirm (if
necessary) View / None (this turns off any specific selections you
may have) and then check View / RF / All.?? That window will then
only show stations that have been received via RF and still allow
your instance to act as an IGate.
Of course, if by "not have an internet connection", you actually
mean having NO Internet connection, then you'll be wanting to
pre-download maps for your area of interest and then simply unplug
the Internet or uncheck Enables / Internet Access which tells
APRSIS32 to not use the Internet for anything.?? Of course, either
of these options also means that you're no longer acting as an
IGate either.
Lynn (D) - KJ4ERJ - Author of APRSISCE
for Windows Mobile and Win32
PS.?? See also:
On 8/16/2024 10:15 PM, Chad WS wrote:
toggle quoted message
Show quoted text
Is it possible to not have an internet connection but have a
map downloaded into aprsis and just receive and transmit by RF
rather than internet?
|
John Galvin N5TIM
Matthew B Simons
Demetre - SV1UY (M0SUY)
Carl