If you are running 2 instances ...
When running 2 instance of APRSIS32, you MUST make sure there are 2 XML files (one for each instance).? In order to do that, you must have 2 "working directories (folders)".
If you don't, the XML will contain the contents used by the last instance you close (it overwrites the XML on close.
Easiest way is to have 2 APRSIS32 folder.? In my example, I will use: ??? APRSIS32????????=> APRSIS32.exe, OSMTiles map folder, and APRSIS32.xml
??? APRSIS32_1????=> shortcut to ..\APRSIS32\APRSIS32.exe, and the second APRSIS32.xml
Example: ??? C:\APRS\APRSIS32 ??????????? APRSIS32.exe ????????????OSMTiles ????????????APRSIS32.xml
??? C:\APRS\APRSIS32_1 ??????? shortcut with settings of:
??????????? Target ?????? C:\APRS\APRSIS32\APRSIS32 ??????????? Start In:???? C:\APRS\APRSIS32_1
??????? APRSIS32.xml??????? => key settings: ????????????<OSM.Path>C:/APRS/APRSIS32/OSMTiles/</OSM.Path> ????????????<Path>.C:/APRS/APRSIS32/OSMTiles/</Path>
??????????? This allows only 1 copy of map tiles and 1 copy of APRSIS32.exe (easier to keep up to date). You could move the map tiles out a folder (as I typically do).? Then the structure? would look like this: ??? C:\APRS\APRSIS32
??? C:\APRS\APRSIS32_1
??? C:\APRS\ OSMTiles??????????????? The XML files (both) would have to be altered to point here
_._,_
|
Burt,
What you are telling us is that you have two instances of APRSISCE/32 running with different configurations.?
Your screen sizes are different causing different layouts to be used, and it sounds like you may be using different maps, or as previously suggested, you may just have the opacity turned waaaay down on the laptop making your maps invisible. ?
Hard to say without seeing exactly what you are seeing. ?
You can set up two machines identically, with one looking at Miami and drag the map away on the other one to look at Los Angeles. Both are “set up identically”, but the maps will look drastically different, showing different information.?
You have changed the viewing parameters on one machine to make them different from the other machine, hence the displays looking different even if they are showing the same physical?location.?
I have a laptop and desktop sitting side by side both running APRSISCE.? Both are configured the same. You would think both computers would show the same.? NO.
Laptop has a white screen with a full length scroller on the left side of screen.? Map does not have any relief nor roads shown.? Objects (call signs, house, derrick, car, etc) are shown on both.
Desktop has relief and roads shown with a small scroller in the upper left corner of the screen with only 6 lines?
scrolling at a time.
Any ideas?
Burt
AF5AA
|
Thanks Ben for the info.
Stretching the screen worked for the desktop in getting the scroller enlarged.
However, clicking on the left and right arrors did nothing for getting the correct screen on the laptop.
I had already done the arror bit.? That is how I managed to get the white screen.? I had a dark grey with just my position on it.
Still looking for a solution.
Burt
AF5AA?
toggle quoted message
Show quoted text
Stretch the screen horizontally and at some point the scroller will become full height. Pess the right arrow button repeatedly and the map details will get darker. At each setting you get one with grid squares
and one without them.
Ben Miller, PE retired
KD9BBB
708-431-7875
On Sat, Apr 27, 2024 at 4:46?PM Burt N Sammis via ?<kango03= [email protected]> wrote:
I have a laptop and desktop sitting side by side both running APRSISCE.? Both are configured the same. You would think both computers would show the same.? NO.
Laptop has a white screen with a full length scroller on the left side of screen.? Map does not have any relief nor roads shown.? Objects (call signs, house, derrick, car, etc) are shown on both.
Desktop has relief and roads shown with a small scroller in the upper left corner of the screen with only 6 lines?
scrolling at a time.
Any ideas?
Burt
AF5AA
|
Thanks Ben for the info.
Stretching the screen worked for the desktop in getting the scroller enlarged.
However, clicking on the left and right arrors did nothing for getting the correct screen on the laptop.
I had already done the arror bit.? That is how I managed to get the white screen.? I had a dark grey with just my position on it.
Still looking for a solution.
Burt
AF5AA?
toggle quoted message
Show quoted text
Stretch the screen horizontally and at some point the scroller will become full height. Pess the right arrow button repeatedly and the map details will get darker. At each setting you get one with grid squares
and one without them.
Ben Miller, PE retired
KD9BBB
708-431-7875
On Sat, Apr 27, 2024 at 4:46?PM Burt N Sammis via ?<kango03= [email protected]> wrote:
I have a laptop and desktop sitting side by side both running APRSISCE.? Both are configured the same. You would think both computers would show the same.? NO.
Laptop has a white screen with a full length scroller on the left side of screen.? Map does not have any relief nor roads shown.? Objects (call signs, house, derrick, car, etc) are shown on both.
Desktop has relief and roads shown with a small scroller in the upper left corner of the screen with only 6 lines?
scrolling at a time.
Any ideas?
Burt
AF5AA
|
Stretch the screen horizontally and at some point the scroller will become full height. Pess the right arrow button repeatedly and the map details will get darker. At each setting you get one with grid squares and one without them.
Ben Miller, PE retired KD9BBB
I have a laptop and desktop sitting side by side both running APRSISCE.? Both are configured the same. You would think both computers would show the same.? NO.
Laptop has a white screen with a full length scroller on the left side of screen.? Map does not have any relief nor roads shown.? Objects (call signs, house, derrick, car, etc) are shown on both.
Desktop has relief and roads shown with a small scroller in the upper left corner of the screen with only 6 lines?
scrolling at a time.
Any ideas?
Burt
AF5AA
|
I have a laptop and desktop sitting side by side both running APRSISCE.? Both are configured the same. You would think both computers would show the same.? NO.
Laptop has a white screen with a full length scroller on the left side of screen.? Map does not have any relief nor roads shown.? Objects (call signs, house, derrick, car, etc) are shown on both.
Desktop has relief and roads shown with a small scroller in the upper left corner of the screen with only 6 lines?
scrolling at a time.
Any ideas?
Burt
AF5AA
|
Re: multi-track screen size & zoom recall
I think that is it, but it isn't clear what these do.
I'm guessing?
Percent (save?)
Size? (save?)
Zoom? (save?)
?
And I don't have a clue what Zoom None does.
I tried looking in the website, but was unable to find anything related to these.? It could be there, but I couldn't find it.
?
So my screens will be better now.? Thanks.
Arnold
KQ6DI
On 04/27/2024 11:47 AM PDT Lynn Deffenbaugh <kj4erj@...> wrote:
?
?
I think it's the check options under the Preferred menu on a MultiTrack window?
And if you close a MultiTrack that is following a specific station, and the window is not maximized, the current settings on that MultiTrack window will be used for that station the next time you MultiTrack it into a new window.
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
On 4/27/2024 2:13 PM, Arnold Harding - KQ6DI wrote:
OK, I forgot, but I successfully changed it without knowing...
?
How do I set Multi-track screen size & zoom settings so they are recalled when I start another Multi-track?
?
I know it's easy, but I can't find it today.
?
Thanks, Arnold
KQ6DI
|
Re: multi-track screen size & zoom recall
I think it's the check options under the Preferred menu on a
MultiTrack window?
And if you close a MultiTrack that is following a specific
station, and the window is not maximized, the current settings on
that MultiTrack window will be used for that station the next time
you MultiTrack it into a new window.
Lynn (D) - KJ4ERJ - Author of APRSISCE
for Windows Mobile and Win32
On 4/27/2024 2:13 PM, Arnold Harding -
KQ6DI wrote:
toggle quoted message
Show quoted text
OK, I forgot,
but I successfully changed it without knowing...
?
How do I set
Multi-track screen size & zoom settings so they are
recalled when I start another Multi-track?
?
I know it's
easy, but I can't find it today.
?
Thanks,
Arnold
KQ6DI
|
multi-track screen size & zoom recall
OK, I forgot, but I successfully changed it without knowing...
?
How do I set Multi-track screen size & zoom settings so they are recalled when I start another Multi-track?
?
I know it's easy, but I can't find it today.
?
Thanks, Arnold
KQ6DI
|
The first one you did may not have been Flashing but had another
notification-type Mic-E status.? You'll notice that some status do
"New Flash" where others may only do "New".
They don't time out, but if a different Mic-E status is received,
it will change to the most recent one.? This happens with some
regularity with Emergency Mic-E status on a full feed typically
caused by corrupted Mic-E packets being gated to the APRS-IS.
Lynn (D) - KJ4ERJ - Author of APRSISCE
for Windows Mobile and Win32
On 4/27/2024 10:01 AM, Brian Wall
wrote:
toggle quoted message
Show quoted text
Lynn,?
I did get a subsequent pop up that I caught while it was
flashing and it did have that option so I clicked Stop Flashing.
I suspect they time out after some period of time. ?I will
monitor whether it has muted those alerts.?
73, Brian
On Apr 26, 2024, at 5:44?PM, Brian
Wall <W1BKW@...> wrote:
? I don’t see an option for “Stop Flashing”
When I click on the callsign in the Follow Window,
MultiTrack and Follow are checked and the only
applicable?? option is “Ignore Mic-E Status”
73, Brian
W1BKW
On Apr 24, 2024, at 10:43?PM,
Lynn Deffenbaugh <kj4erj@...> wrote:
?
If you click on the station that is using
Priority, you should see an option to "Stop
Flashing".?? Once you do that, you will be asked
if you want to permanently ignore the status from
that station.?? Doing that allows you to keep
Priority or Special enabled in Mic-E
Notifications, but slowly ignore those stations
that are using it routinely.
Many people don't understand what the Mic-E
status bits mean according to Bob's original
intentions.?? They just set them to Special or
Priority without realizing the effect on a
properly implemented APRS client application.
BTW, the code words in the Mic-E Notifications
menu are:
Msg - Queue an internal message when the status
is received
New - Open a new MultiTrack when the status is
newly received
Active - Open a new MultiTrack every time the
status is received
Flash - Flash the MultiTrack window
{color} - Put a colored box around the station's
symbol
Lynn (D) - KJ4ERJ -
Author of APRSISCE for Windows Mobile and Win32
On 4/24/2024 10:30 PM,
Brian Wall wrote:
Thank you Lynn,
Yes I had seen previously the Mic-E
Notifications for Priority was checked so I
expected the messages but didn’t realize the
Follow screen was triggered from that as well.
?It is not so much a nuisance as it was just a
mystery why the follow screen also popped.
?Thanks for the link also; that was useful.?
73, Brian
W1BKW
On Apr 24, 2024, at
10:12?PM, Lynn Deffenbaugh
<kj4erj@...> wrote:
?
In that case, look at Configure / Mic-E
Notifications / Priority.?? I'm guessing
that station is transmitting Priority and
you have it enabled to bring up a New
MultiTrack when received (which is the
default behavior).?? You can also read:
Lynn (D) - KJ4ERJ
- Author of APRSISCE for Windows Mobile
and Win32
On 4/24/2024
9:40 PM, Brian Wall wrote:
Lynn,?
I have similar issue but not for
location ME, but for one specific
callsign. ?I get a Follow screen on his
callsign and I get messages that he
transmitted Priority status messages. ?I
have looked through the menus and can’t
find anything associated with his
callsign.?
73, Brian
W1BKW
On Apr 24,
2024, at 9:27?PM, Lynn Deffenbaugh
<kj4erj@...> wrote:
?
Check Screen / Labels / Nicknames
/ ME and make sure you didn't
check any of the MultiTrack (New
Active Always) checkboxes.
Lynn (D)
- KJ4ERJ - Author of APRSISCE for
Windows Mobile and Win32
On
4/24/2024 5:24 PM, Brian Boulden
wrote:
This program is new to me but
so far I am very impressed. ?
贬辞飞别惫别谤….
Can someone please tell me how
to turn off the pop up screen on
my own location that comes up
every 30 minutes.?
It’s acting like I am following
myself, but I’m sorry I already
know where I am ?
Thanks
Brian
|
Ok, it's called "Ignore Mic-E Status".? Chalk it up to bad
memory.
Lynn (D) - KJ4ERJ - Author of APRSISCE
for Windows Mobile and Win32
On 4/26/2024 5:44 PM, Brian Wall wrote:
toggle quoted message
Show quoted text
I don’t see an option for “Stop Flashing”
When I click on the callsign in the Follow Window,
MultiTrack and Follow are checked and the only applicable??
option is “Ignore Mic-E Status”
73, Brian
W1BKW
On Apr 24, 2024, at 10:43?PM, Lynn
Deffenbaugh <kj4erj@...> wrote:
?
If you click on the station that is using Priority, you
should see an option to "Stop Flashing".?? Once you do
that, you will be asked if you want to permanently
ignore the status from that station.?? Doing that allows
you to keep Priority or Special enabled in Mic-E
Notifications, but slowly ignore those stations that are
using it routinely.
Many people don't understand what the Mic-E status bits
mean according to Bob's original intentions.?? They just
set them to Special or Priority without realizing the
effect on a properly implemented APRS client
application.
BTW, the code words in the Mic-E Notifications menu
are:
Msg - Queue an internal message when the status is
received
New - Open a new MultiTrack when the status is newly
received
Active - Open a new MultiTrack every time the status is
received
Flash - Flash the MultiTrack window
{color} - Put a colored box around the station's symbol
Lynn (D) - KJ4ERJ - Author of
APRSISCE for Windows Mobile and Win32
On 4/24/2024 10:30 PM, Brian
Wall wrote:
Thank you Lynn,
Yes I had seen previously the Mic-E Notifications
for Priority was checked so I expected the messages
but didn’t realize the Follow screen was triggered
from that as well. ?It is not so much a nuisance as it
was just a mystery why the follow screen also popped.
?Thanks for the link also; that was useful.?
73, Brian
W1BKW
On Apr 24, 2024, at
10:12?PM, Lynn Deffenbaugh
<kj4erj@...> wrote:
?
In that case, look at Configure / Mic-E
Notifications / Priority.?? I'm guessing that
station is transmitting Priority and you have it
enabled to bring up a New MultiTrack when
received (which is the default behavior).?? You
can also read:
Lynn (D) - KJ4ERJ -
Author of APRSISCE for Windows Mobile and Win32
On 4/24/2024 9:40 PM,
Brian Wall wrote:
Lynn,?
I have similar issue but not for location
ME, but for one specific callsign. ?I get a
Follow screen on his callsign and I get
messages that he transmitted Priority status
messages. ?I have looked through the menus and
can’t find anything associated with his
callsign.?
73, Brian
W1BKW
On Apr 24, 2024, at
9:27?PM, Lynn Deffenbaugh
<kj4erj@...> wrote:
?
Check Screen / Labels / Nicknames / ME
and make sure you didn't check any of
the MultiTrack (New Active Always)
checkboxes.
Lynn (D) -
KJ4ERJ - Author of APRSISCE for Windows
Mobile and Win32
On 4/24/2024
5:24 PM, Brian Boulden wrote:
This program is new to me but so far
I am very impressed. ?
贬辞飞别惫别谤….
Can someone please tell me how to turn
off the pop up screen on my own
location that comes up every 30
minutes.?
It’s acting like I am following
myself, but I’m sorry I already know
where I am ?
Thanks
Brian
|
Lynn,?
I did get a subsequent pop up that I caught while it was flashing and it did have that option so I clicked Stop Flashing. I suspect they time out after some period of time. ?I will monitor whether it has muted those alerts.?
toggle quoted message
Show quoted text
On Apr 26, 2024, at 5:44?PM, Brian Wall <W1BKW@...> wrote:
? I don’t see an option for “Stop Flashing”
When I click on the callsign in the Follow Window, MultiTrack and Follow are checked and the only applicable?? option is “Ignore Mic-E Status”
73, Brian
W1BKW
On Apr 24, 2024, at 10:43?PM, Lynn Deffenbaugh <kj4erj@...> wrote:
?
If you click on the station that is using Priority, you should see an option to "Stop Flashing".?? Once you do that, you will be asked if you want to permanently ignore the status from that station.?? Doing that allows you to keep Priority or Special enabled
in Mic-E Notifications, but slowly ignore those stations that are using it routinely.
Many people don't understand what the Mic-E status bits mean according to Bob's original intentions.?? They just set them to Special or Priority without realizing the effect on a properly implemented APRS client application.
BTW, the code words in the Mic-E Notifications menu are:
Msg - Queue an internal message when the status is received
New - Open a new MultiTrack when the status is newly received
Active - Open a new MultiTrack every time the status is received
Flash - Flash the MultiTrack window
{color} - Put a colored box around the station's symbol
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
On 4/24/2024 10:30 PM, Brian Wall wrote:
Thank you Lynn,
Yes I had seen previously the Mic-E Notifications for Priority was checked so I expected the messages but didn’t realize the Follow screen was triggered from that as well. ?It is not so much a nuisance as it was just a mystery why the follow screen also
popped. ?Thanks for the link also; that was useful.?
73, Brian
W1BKW
On Apr 24, 2024, at 10:12?PM, Lynn Deffenbaugh
<kj4erj@...> wrote:
?
In that case, look at Configure / Mic-E Notifications / Priority.?? I'm guessing that station is transmitting Priority and you have it enabled to bring up a New MultiTrack when received (which is the default behavior).?? You can also read:
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
On 4/24/2024 9:40 PM, Brian Wall wrote:
Lynn,?
I have similar issue but not for location ME, but for one specific callsign. ?I get a Follow screen on his callsign and I get messages that he transmitted Priority status messages. ?I have looked through the menus and can’t find anything associated with
his callsign.?
73, Brian
W1BKW
On Apr 24, 2024, at 9:27?PM, Lynn Deffenbaugh
<kj4erj@...> wrote:
?
Check Screen / Labels / Nicknames / ME and make sure you didn't check any of the MultiTrack (New Active Always) checkboxes.
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
On 4/24/2024 5:24 PM, Brian Boulden wrote:
This program is new to me but so far I am very impressed. ?
贬辞飞别惫别谤….
Can someone please tell me how to turn off the pop up screen on my own location that comes up every 30 minutes.?
It’s acting like I am following myself, but I’m sorry I already know where I am ?
Thanks
Brian
|
I don’t see an option for “Stop Flashing”
When I click on the callsign in the Follow Window, MultiTrack and Follow are checked and the only applicable?? option is “Ignore Mic-E Status”
73, Brian
toggle quoted message
Show quoted text
On Apr 24, 2024, at 10:43?PM, Lynn Deffenbaugh <kj4erj@...> wrote:
?
If you click on the station that is using Priority, you should see an option to "Stop Flashing".?? Once you do that, you will be asked if you want to permanently ignore the status from that station.?? Doing that allows you to keep Priority or Special enabled
in Mic-E Notifications, but slowly ignore those stations that are using it routinely.
Many people don't understand what the Mic-E status bits mean according to Bob's original intentions.?? They just set them to Special or Priority without realizing the effect on a properly implemented APRS client application.
BTW, the code words in the Mic-E Notifications menu are:
Msg - Queue an internal message when the status is received
New - Open a new MultiTrack when the status is newly received
Active - Open a new MultiTrack every time the status is received
Flash - Flash the MultiTrack window
{color} - Put a colored box around the station's symbol
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
On 4/24/2024 10:30 PM, Brian Wall wrote:
Thank you Lynn,
Yes I had seen previously the Mic-E Notifications for Priority was checked so I expected the messages but didn’t realize the Follow screen was triggered from that as well. ?It is not so much a nuisance as it was just a mystery why the follow screen also
popped. ?Thanks for the link also; that was useful.?
73, Brian
W1BKW
On Apr 24, 2024, at 10:12?PM, Lynn Deffenbaugh
<kj4erj@...> wrote:
?
In that case, look at Configure / Mic-E Notifications / Priority.?? I'm guessing that station is transmitting Priority and you have it enabled to bring up a New MultiTrack when received (which is the default behavior).?? You can also read:
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
On 4/24/2024 9:40 PM, Brian Wall wrote:
Lynn,?
I have similar issue but not for location ME, but for one specific callsign. ?I get a Follow screen on his callsign and I get messages that he transmitted Priority status messages. ?I have looked through the menus and can’t find anything associated with
his callsign.?
73, Brian
W1BKW
On Apr 24, 2024, at 9:27?PM, Lynn Deffenbaugh
<kj4erj@...> wrote:
?
Check Screen / Labels / Nicknames / ME and make sure you didn't check any of the MultiTrack (New Active Always) checkboxes.
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
On 4/24/2024 5:24 PM, Brian Boulden wrote:
This program is new to me but so far I am very impressed. ?
贬辞飞别惫别谤….
Can someone please tell me how to turn off the pop up screen on my own location that comes up every 30 minutes.?
It’s acting like I am following myself, but I’m sorry I already know where I am ?
Thanks
Brian
|
Thanks Lynn. Made the changes and fingers crossed.?
Again thanks?
Brian
|
Interesting/Funny story regarding Priority msgs. ?
When I first setup APRS on my Yaesu FT5D I was using priority status during the configuration testing. Finished and put it away. ?About an hour later two deputy sheriff’s showed up at my door for a welfare check that was called in by a fire dept about
60 miles away that saw my beacon. ?At least we know someone is listening!!
toggle quoted message
Show quoted text
On Apr 24, 2024, at 10:43?PM, Lynn Deffenbaugh <kj4erj@...> wrote:
?
If you click on the station that is using Priority, you should see an option to "Stop Flashing".?? Once you do that, you will be asked if you want to permanently ignore the status from that station.?? Doing that allows you to keep Priority or Special enabled
in Mic-E Notifications, but slowly ignore those stations that are using it routinely.
Many people don't understand what the Mic-E status bits mean according to Bob's original intentions.?? They just set them to Special or Priority without realizing the effect on a properly implemented APRS client application.
BTW, the code words in the Mic-E Notifications menu are:
Msg - Queue an internal message when the status is received
New - Open a new MultiTrack when the status is newly received
Active - Open a new MultiTrack every time the status is received
Flash - Flash the MultiTrack window
{color} - Put a colored box around the station's symbol
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
On 4/24/2024 10:30 PM, Brian Wall wrote:
Thank you Lynn,
Yes I had seen previously the Mic-E Notifications for Priority was checked so I expected the messages but didn’t realize the Follow screen was triggered from that as well. ?It is not so much a nuisance as it was just a mystery why the follow screen also
popped. ?Thanks for the link also; that was useful.?
73, Brian
W1BKW
On Apr 24, 2024, at 10:12?PM, Lynn Deffenbaugh
<kj4erj@...> wrote:
?
In that case, look at Configure / Mic-E Notifications / Priority.?? I'm guessing that station is transmitting Priority and you have it enabled to bring up a New MultiTrack when received (which is the default behavior).?? You can also read:
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
On 4/24/2024 9:40 PM, Brian Wall wrote:
Lynn,?
I have similar issue but not for location ME, but for one specific callsign. ?I get a Follow screen on his callsign and I get messages that he transmitted Priority status messages. ?I have looked through the menus and can’t find anything associated with
his callsign.?
73, Brian
W1BKW
On Apr 24, 2024, at 9:27?PM, Lynn Deffenbaugh
<kj4erj@...> wrote:
?
Check Screen / Labels / Nicknames / ME and make sure you didn't check any of the MultiTrack (New Active Always) checkboxes.
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
On 4/24/2024 5:24 PM, Brian Boulden wrote:
This program is new to me but so far I am very impressed. ?
贬辞飞别惫别谤….
Can someone please tell me how to turn off the pop up screen on my own location that comes up every 30 minutes.?
It’s acting like I am following myself, but I’m sorry I already know where I am ?
Thanks
Brian
|
If you click on the station that is using Priority, you should
see an option to "Stop Flashing".?? Once you do that, you will be
asked if you want to permanently ignore the status from that
station.?? Doing that allows you to keep Priority or Special
enabled in Mic-E Notifications, but slowly ignore those stations
that are using it routinely.
Many people don't understand what the Mic-E status bits mean
according to Bob's original intentions.?? They just set them to
Special or Priority without realizing the effect on a properly
implemented APRS client application.
BTW, the code words in the Mic-E Notifications menu are:
Msg - Queue an internal message when the status is received
New - Open a new MultiTrack when the status is newly received
Active - Open a new MultiTrack every time the status is received
Flash - Flash the MultiTrack window
{color} - Put a colored box around the station's symbol
Lynn (D) - KJ4ERJ - Author of APRSISCE
for Windows Mobile and Win32
On 4/24/2024 10:30 PM, Brian Wall
wrote:
toggle quoted message
Show quoted text
Thank you Lynn,
Yes I had seen previously the Mic-E Notifications for
Priority was checked so I expected the messages but didn’t
realize the Follow screen was triggered from that as well. ?It
is not so much a nuisance as it was just a mystery why the
follow screen also popped. ?Thanks for the link also; that was
useful.?
73, Brian
W1BKW
On Apr 24, 2024, at 10:12?PM, Lynn
Deffenbaugh <kj4erj@...> wrote:
?
In that case, look at Configure / Mic-E Notifications /
Priority.?? I'm guessing that station is transmitting
Priority and you have it enabled to bring up a New
MultiTrack when received (which is the default
behavior).?? You can also read:
Lynn (D) - KJ4ERJ - Author of
APRSISCE for Windows Mobile and Win32
On 4/24/2024 9:40 PM, Brian
Wall wrote:
Lynn,?
I have similar issue but not for location ME, but for
one specific callsign. ?I get a Follow screen on his
callsign and I get messages that he transmitted Priority
status messages. ?I have looked through the menus and
can’t find anything associated with his callsign.?
73, Brian
W1BKW
On Apr 24, 2024, at 9:27?PM,
Lynn Deffenbaugh
<kj4erj@...> wrote:
?
Check Screen / Labels / Nicknames / ME and make
sure you didn't check any of the MultiTrack (New
Active Always) checkboxes.
Lynn (D) - KJ4ERJ -
Author of APRSISCE for Windows Mobile and Win32
On 4/24/2024 5:24 PM,
Brian Boulden wrote:
This program is new to me but so far I am very
impressed. ?
贬辞飞别惫别谤….
Can someone please tell me how to turn off the
pop up screen on my own location that comes up
every 30 minutes.?
It’s acting like I am following myself, but I’m
sorry I already know where I am ?
Thanks
Brian
|
Thank you Lynn,
Yes I had seen previously the Mic-E Notifications for Priority was checked so I expected the messages but didn’t realize the Follow screen was triggered from that as well. ?It is not so much a nuisance as it was just a mystery why the follow screen also
popped. ?Thanks for the link also; that was useful.?
73, Brian
toggle quoted message
Show quoted text
On Apr 24, 2024, at 10:12?PM, Lynn Deffenbaugh <kj4erj@...> wrote:
?
In that case, look at Configure / Mic-E Notifications / Priority.?? I'm guessing that station is transmitting Priority and you have it enabled to bring up a New MultiTrack when received (which is the default behavior).?? You can also read:
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
On 4/24/2024 9:40 PM, Brian Wall wrote:
Lynn,?
I have similar issue but not for location ME, but for one specific callsign. ?I get a Follow screen on his callsign and I get messages that he transmitted Priority status messages. ?I have looked through the menus and can’t find anything associated with
his callsign.?
73, Brian
W1BKW
On Apr 24, 2024, at 9:27?PM, Lynn Deffenbaugh
<kj4erj@...> wrote:
?
Check Screen / Labels / Nicknames / ME and make sure you didn't check any of the MultiTrack (New Active Always) checkboxes.
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
On 4/24/2024 5:24 PM, Brian Boulden wrote:
This program is new to me but so far I am very impressed. ?
贬辞飞别惫别谤….
Can someone please tell me how to turn off the pop up screen on my own location that comes up every 30 minutes.?
It’s acting like I am following myself, but I’m sorry I already know where I am ?
Thanks
Brian
|
In that case, look at Configure / Mic-E Notifications /
Priority.?? I'm guessing that station is transmitting Priority and
you have it enabled to bring up a New MultiTrack when received
(which is the default behavior).?? You can also read:
Lynn (D) - KJ4ERJ - Author of APRSISCE
for Windows Mobile and Win32
On 4/24/2024 9:40 PM, Brian Wall wrote:
toggle quoted message
Show quoted text
Lynn,?
I have similar issue but not for location ME, but for one
specific callsign. ?I get a Follow screen on his callsign and I
get messages that he transmitted Priority status messages. ?I
have looked through the menus and can’t find anything associated
with his callsign.?
73, Brian
W1BKW
On Apr 24, 2024, at 9:27?PM, Lynn
Deffenbaugh <kj4erj@...> wrote:
?
Check Screen / Labels / Nicknames / ME and make sure you
didn't check any of the MultiTrack (New Active Always)
checkboxes.
Lynn (D) - KJ4ERJ - Author of
APRSISCE for Windows Mobile and Win32
On 4/24/2024 5:24 PM, Brian
Boulden wrote:
This program is new to me but so far I am very
impressed. ?
贬辞飞别惫别谤….
Can someone please tell me how to turn off the pop up
screen on my own location that comes up every 30
minutes.?
It’s acting like I am following myself, but I’m sorry I
already know where I am ?
Thanks
Brian
|
Lynn,?
I have similar issue but not for location ME, but for one specific callsign. ?I get a Follow screen on his callsign and I get messages that he transmitted Priority status messages. ?I have looked through the menus and can’t find anything associated with
his callsign.?
73, Brian
toggle quoted message
Show quoted text
On Apr 24, 2024, at 9:27?PM, Lynn Deffenbaugh <kj4erj@...> wrote:
?
Check Screen / Labels / Nicknames / ME and make sure you didn't check any of the MultiTrack (New Active Always) checkboxes.
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
On 4/24/2024 5:24 PM, Brian Boulden wrote:
This program is new to me but so far I am very impressed. ?
贬辞飞别惫别谤….
Can someone please tell me how to turn off the pop up screen on my own location that comes up every 30 minutes.?
It’s acting like I am following myself, but I’m sorry I already know where I am ?
Thanks
Brian
|
Check Screen / Labels / Nicknames / ME and make sure you didn't
check any of the MultiTrack (New Active Always) checkboxes.
Lynn (D) - KJ4ERJ - Author of APRSISCE
for Windows Mobile and Win32
On 4/24/2024 5:24 PM, Brian Boulden
wrote:
toggle quoted message
Show quoted text
This program is new to me but so far I am very impressed. ?
贬辞飞别惫别谤….
Can someone please tell me how to turn off the pop up screen on
my own location that comes up every 30 minutes.?
It’s acting like I am following myself, but I’m sorry I already
know where I am ?
Thanks
Brian
|
Brian Wall
Brian Boulden, W4BJB