Passcode request already filled and sent off list
Hi Can I get a passcode for aprsisse/32 Call sign: ko6ibm Name: Gareth Bevan
Thanks Gareth
Sent from Gmail Mobile
--
73 de Steve Wilson KF6WAX, APRSISCE32, ADMIN/MODERATOR
|
Hi Can I get a passcode for aprsisse/32 Call sign: ko6ibm Name: Gareth Bevan
Thanks Gareth
Sent from Gmail Mobile
|
Re: Passcode for APRSISCE/32
sent already, check your spam filter
passcode please?
?
Allen Coxe
vk6bfo
--
73 de Steve Wilson KF6WAX, APRSISCE32, ADMIN/MODERATOR
|
passcode please?
?
Allen Coxe
vk6bfo
|
|
|
|
|
|
|
I am requesting a passcode
Robert Cartier
KD1JG?
|
Thank you so much! Both problems solved.
toggle quoted message
Show quoted text
On Mar 18, 2025, at 17:58, Adam - KC2ANT via groups.io <kc2ant@...> wrote:
Hit the right arrow about 50 times. Map should come back.
Frequency monitor has to be open when you disable it in order to shut it off.
----
73s
Adam Mahnke
KC2ANT
On Tuesday, March 18th, 2025 at 18:45, T W via groups.io <kf6kyd@...> wrote:
Hi, I have been running APRIS and all of the sudden I no maps. I also cannot shut off the frequency monitor. Whenever I go to enables and try and turn off frequency monitor it brings up the frequency monitor window but it won’t turn it off. Any help with either issue would be greatly appreciated.
Cheers, Tom kf6kyd
|
Hit the right arrow about 50 times. Map should come back.
Frequency monitor has to be open when you disable it in order to shut it off.
----
73s
Adam Mahnke
KC2ANT
toggle quoted message
Show quoted text
On Tuesday, March 18th, 2025 at 18:45, T W via groups.io <kf6kyd@...> wrote: Hi, I have been running APRIS and all of the sudden I no maps. I also cannot shut off the frequency monitor. Whenever I go to enables and try and turn off frequency monitor it brings up the frequency monitor window but it won’t turn it off. Any help with either issue would be greatly appreciated.
Cheers, Tom kf6kyd
|
Hi, I have been running APRIS and all of the sudden I no maps. I also cannot shut off the frequency monitor. Whenever I go to enables and try and turn off frequency monitor it brings up the frequency monitor window but it won’t turn it off. Any help with either issue would be greatly appreciated.
Cheers, Tom kf6kyd
|
Re: Helps to understand colors and transmit
Sometimes I think the WIKI being on a different site from the group.io are can get forgotten. It is still a very valuable resource for the application: ???
The site menu is easy to navigate, but sometimes the searching has problems. In the case of screen colors and related questions, gives a lot of good information, even if the pictures are from the old Windows CE version.
On Sunday, March 9, 2025 at 03:59:53 PM EDT, Eric Lorenz K9LGE <k0lge@...> wrote:
Normally, I *believe* that means that the message has not been successfully sent (by whatever method is chosen). If the message is sent successfully it will turn green.?
Eric K0LGE?
Thank you for answering
1: I understood the colors of the messages and also the option to choose how I want to transmit
I have another question:
#: On the right side of the window where it says DSBL, this line is now green but changes color, what does this color mean?
#: On the left side you can see the stations and they are also colored, what does it mean? Or where can I look?
Thank you
?
|
Re: Helps to understand colors and transmit
Hi, thanks, I found everything I needed
Thanks to you
|
Re: Helps to understand colors and transmit
Normally, I *believe* that means that the message has not been successfully sent (by whatever method is chosen). If the message is sent successfully it will turn green.?
Eric K0LGE?
Thank you for answering
1: I understood the colors of the messages and also the option to choose how I want to transmit
I have another question:
#: On the right side of the window where it says DSBL, this line is now green but changes color, what does this color mean?
#: On the left side you can see the stations and they are also colored, what does it mean? Or where can I look?
Thank you
?
|
Re: Helps to understand colors and transmit
Thank you for answering
1: I understood the colors of the messages and also the option to choose how I want to transmit
I have another question:
#: On the right side of the window where it says DSBL, this line is now green but changes color, what does this color mean?
#: On the left side you can see the stations and they are also colored, what does it mean? Or where can I look?
Thank you
?
|
On Wednesday, March 5, 2025 at 11:55:25 PM EST, scott.kemler via groups.io <scott.kemler@...> wrote:
I need passcode for APRSISCE/32
I am Scott Kemler AE0ZP
Sent from Proton Mail Android
|
Great! Glad I could help and you are off and runnign!
Enjoy!
On Sunday, March 9, 2025 at 12:22:42 PM EDT, Don Wolfe via groups.io <w4gcw@...> wrote:
Good morning Robert, ? SUCCESS!! I never gave any consideration to the green LED like I should have, that was a very big clue and I missed it. Once I changed the configuration of AMODE and ABAUD everything fell into place and starting working. I was testing using W4GCW-8 so if you look at it on the APRS map you'll see where I went around the block. ? You've been very helpful and I really appreciate your efforts.
Packet: W4GCW@W4MLB.#ecfl.fl.usa.noam
On Saturday, March 8, 2025 at 10:56:21 PM EST, Rob Giuliano via groups.io <kb8rco@...> wrote:
First question would be: Does the Green LED flash for some time, then go solid? ? If not, then the TT4 is not getting the GPS data.
Are you using a splitter that allows both computer and GPS? ?? The Byonics splitter has a port for the computer and one for the GPS with proper connectors.
?? Without a splitter, you must configure AMODE and ABAUD must be set to the GPS configuration. ?? BMODE and BBAUD won't matter without the splitter ???
NOTE:? The TT4 always starts out at 19200 baud and after initialization, changes to the ABAUD and AMODE settings.? This means you can still make settings change on PORT A, even if it is set to GPS.
If that isn't it, you need to provide more details: ?? What firmware is in the TT4? ?? Explain you connections to GPS and radio ?? Post your settings and we can review them to provide more comments.
On Saturday, March 8, 2025 at 04:08:54 PM EST, Don Wolfe via groups.io <w4gcw@...> wrote:
I'm trying to resururrect? my old TT4 and need some help. All I'm using is the tracker with a gps antenna, do I need to program two ports or just one? I have it configured to what seemed correct to me but when I install it in the car it doesn't track. The TT3 I've been using tracks fine so I'm guessing the gps antenna is good. Any suggestions would be very much appreciated.
73, Don? W4GCW /? WQAI774 EL98pf
Packet: W4GCW@W4MLB.#ecfl.fl.usa.noam
|
Re: Helps to understand colors and transmit
http://aprsisce.wikidot.com/message-notifier
When sending a message, on the lower left there are some checkboxes to let you select paths.
Adam
Kc2ant
-------- Original Message -------- On 3/9/25 12:42 PM, EA4HRV via groups.io wrote: Hi guys
I need your help
My equipment:
Kenwood TH-D75
My program:APRSIS32 Built:2020/05/01 21:21
#:I wanted to know what the colors mean? (Is there a page to see what it is or how to use it???)
#: When I send a message I only see that it is through the internet, is there some configuration so that it transmits with the power of the equipment??
Thanks
|
Helps to understand colors and transmit
Hi guys
I need your help
My equipment:
Kenwood TH-D75
My program:APRSIS32 Built:2020/05/01 21:21
#:I wanted to know what the colors mean? (Is there a page to see what it is or how to use it???)
#: When I send a message I only see that it is through the internet, is there some configuration so that it transmits with the power of the equipment??
Thanks
|
Good morning Robert, ? SUCCESS!! I never gave any consideration to the green LED like I should have, that was a very big clue and I missed it. Once I changed the configuration of AMODE and ABAUD everything fell into place and starting working. I was testing using W4GCW-8 so if you look at it on the APRS map you'll see where I went around the block. ? You've been very helpful and I really appreciate your efforts.
Packet: W4GCW@W4MLB.#ecfl.fl.usa.noam
On Saturday, March 8, 2025 at 10:56:21 PM EST, Rob Giuliano via groups.io <kb8rco@...> wrote:
First question would be: Does the Green LED flash for some time, then go solid? ? If not, then the TT4 is not getting the GPS data.
Are you using a splitter that allows both computer and GPS? ?? The Byonics splitter has a port for the computer and one for the GPS with proper connectors.
?? Without a splitter, you must configure AMODE and ABAUD must be set to the GPS configuration. ?? BMODE and BBAUD won't matter without the splitter ???
NOTE:? The TT4 always starts out at 19200 baud and after initialization, changes to the ABAUD and AMODE settings.? This means you can still make settings change on PORT A, even if it is set to GPS.
If that isn't it, you need to provide more details: ?? What firmware is in the TT4? ?? Explain you connections to GPS and radio ?? Post your settings and we can review them to provide more comments.
On Saturday, March 8, 2025 at 04:08:54 PM EST, Don Wolfe via groups.io <w4gcw@...> wrote:
I'm trying to resururrect? my old TT4 and need some help. All I'm using is the tracker with a gps antenna, do I need to program two ports or just one? I have it configured to what seemed correct to me but when I install it in the car it doesn't track. The TT3 I've been using tracks fine so I'm guessing the gps antenna is good. Any suggestions would be very much appreciated.
73, Don? W4GCW /? WQAI774 EL98pf
Packet: W4GCW@W4MLB.#ecfl.fl.usa.noam
|
VK6BFO - Allen
EA4HRV
Don Wolfe