Re: Three Jaw Chuck / Spindle Bore Opening
It was rather expensive for a tool you'd only use once in your life. Maybe setting up such a program again would be a good idea, with a hefty deposit to borrow the tool.
Mike Taglieri?
On Sun, Nov 24, 2024, 11:09?PM davesmith1800 via <davesmith1= [email protected]> wrote: What was so special about the reamer?
?
Dave?
?
On Sun, Nov 24, 2024 at 04:20 PM, Roy wrote:
Opening the spindle bore is easy. LMS used to loan short shank reamers for that, until they didn't return. Doing it with a boring bar or adjustable reamer? is just a bit more tedious. (Did mine before the reamers vanished.)
?
Roy
|
I’ve had his site bookmarked for ages…his stuff is very good!
?
The author has a website and the indexer is described on this page. He has many other interesting things too.
?
Jonas
--? Bruce Johnson
"Wherever you go, there you are." B. Banzai, PhD
|
?
The author has a website and the indexer is described on this page. He has many other interesting things too.
?
Jonas
|
Re: Three Jaw Chuck / Spindle Bore Opening
You’ve missed the (short) point being made.? Again. ? Tony ? ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of davesmith1800 via groups.io
Sent: Tuesday, 26 November 2024 4:28 AM
To: [email protected]
Subject: Re: [7x12MiniLathe] Three Jaw Chuck / Spindle Bore Opening? I had turret lathes and screw machines. Everthing was short.? Most drill bit are screw machine length even upto 2?" size.? Reamers I buy long because it lower cost can cut the shank down. On Sun, Nov 24, 2024 at 10:00 PM, Tony Smith wrote: I’m pretty sure you can figure out why “short shank” would be useful. ? Tony ? ? ? What was so special about the reamer? On Sun, Nov 24, 2024 at 04:20 PM, Roy wrote: Opening the spindle bore is easy. LMS used to loan short shank reamers for that, until they didn't return. Doing it with a boring bar or adjustable reamer? is just a bit more tedious. (Did mine before the reamers vanished.)
|
Re: Three Jaw Chuck / Spindle Bore Opening
It had a shortened shank & (IIRC) a #2 Morse taper end to let it fit snugly in the TS. Cleaning it & removing the excess shipping labels from the package took longer than the actual reaming. Previous users had slapped so many new labels on top of the old ones that it was unwieldy.
?
Roy
|
??? They have some pretty darn awesome vintage dirt & street
bike mags too
On 11/24/24 7:01 AM, Craig Hopewell via
groups.io wrote:
toggle quoted message
Show quoted text
That is a good magazine.? I will look up the indexer
article.?? Several Briitish magazines are superior to USA
perioicals - especially air gun magazines.
?
--
Lone Tree, Colorado? ?USA
|
BlackFriday hobby mag sale
I got this mail today & heres a list of their hobby mags that are part of their blackFriday Magazine sale , some of ya may be interested
,ZQE9,5GIPSW,4MGQ9,1
|
If you want to have a peek at the article before you invest in the magazine, your public library just _might_ have access to this magazine. Our public library here in Winnipeg enables cardholders to access Model Engineers Workshop through the "Overdrive" digital media application.?
|
Re: Three Jaw Chuck / Spindle Bore Opening
I had turret lathes and screw machines. Everthing was short.?
?
Most drill bit are screw machine length even upto 2?" size.?
?
Reamers I buy long because it lower cost can cut the shank down.
?
Dave?
?
On Sun, Nov 24, 2024 at 10:00 PM, Tony Smith wrote:
I’m pretty sure you can figure out why “short shank” would be useful.
?
Tony
?
?
?
What was so special about the reamer?
On Sun, Nov 24, 2024 at 04:20 PM, Roy wrote:
Opening the spindle bore is easy. LMS used to loan short shank reamers for that, until they didn't return. Doing it with a boring bar or adjustable reamer? is just a bit more tedious. (Did mine before the reamers vanished.)
|
Re: Three Jaw Chuck / Spindle Bore Opening
I’m pretty sure you can figure out why “short shank” would be useful. ? Tony ? ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of davesmith1800 via groups.io
Sent: Monday, 25 November 2024 3:09 PM
To: [email protected]
Subject: Re: [7x12MiniLathe] Three Jaw Chuck / Spindle Bore Opening? What was so special about the reamer? On Sun, Nov 24, 2024 at 04:20 PM, Roy wrote: Opening the spindle bore is easy. LMS used to loan short shank reamers for that, until they didn't return. Doing it with a boring bar or adjustable reamer? is just a bit more tedious. (Did mine before the reamers vanished.)
|
Re: Three Jaw Chuck / Spindle Bore Opening
??? Ya didn't have to buy one , they were loaners & aparently
some folks didn't return them . Imagine that
animal
On 11/24/24 8:09 PM, davesmith1800
wrote:
toggle quoted message
Show quoted text
What was so special about the reamer?
?
Dave?
?
On Sun, Nov 24, 2024 at 04:20 PM, Roy wrote:
Opening the spindle bore is easy. LMS used to loan short
shank reamers for that, until they didn't return. Doing it
with a boring bar or adjustable reamer? is just a bit more
tedious. (Did mine before the reamers vanished.)
?
Roy
|
Re: Three Jaw Chuck / Spindle Bore Opening
What was so special about the reamer?
?
Dave?
?
On Sun, Nov 24, 2024 at 04:20 PM, Roy wrote:
Opening the spindle bore is easy. LMS used to loan short shank reamers for that, until they didn't return. Doing it with a boring bar or adjustable reamer? is just a bit more tedious. (Did mine before the reamers vanished.)
?
Roy
|
Re: Three Jaw Chuck / Spindle Bore Opening
Opening the spindle bore is easy. LMS used to loan short shank reamers for that, until they didn't return. Doing it with a boring bar or adjustable reamer? is just a bit more tedious. (Did mine before the reamers vanished.)
?
Roy
|
Thanks for the heads up. I sent away for that issue.
?
Tom
|
That is a good magazine.? I will look up the indexer article.?? Several Briitish magazines are superior to USA perioicals - especially air gun magazines.
?
Thanks!
?
--
Lone Tree, Colorado? ?USA
|
Catching up on my electronic subscriptions the Oct 2024 issue of Model Engineers Workshop has a pretty interesting diy indexer for the mini lathe . This is a English Magazine , but it's available at most book stores that have a fair sized magazine dept . I subscribe to this & read online . It seems they have more projects in one month than the other 2 mags do in half a year . They should be having their black Friday subscription drive going on about now .
|
Re: Three Jaw Chuck / Spindle Bore Opening
I agree you put a bigger hole.?
I have not had to bigger hole but I look at the scroll bearing size the hole needs to smaller that bearing.?
?
I typically buy chuck with hole size? I want.
?
Dave?
|
Re: Three Jaw Chuck / Spindle Bore Opening
John, I see no reason why the three jaw chuck bore could not be bored out to a larger size, in fact I would want to increase the bore size to as accommodate larger material if space allows.
Dick
|
Re: I MADE IT TO 70 off subject
Now have more time the mini lathe. Working on few ideas for projects to do .?
?
Maybe make on the mini lathe a sun clock ? for a back up.?
?
Dave?
?
On Tue, Nov 19, 2024 at 04:56 PM, Ryan H wrote:
Happy Birthday Dave!??What an amazing story!????
And to keep it on topic I'm about to machine up a couple sorta standoffs for a mount on a light setup.?
On Nov 19, 2024 at 7:45?PM -0500, mike allen <animal@...>, wrote:
Congratulations happy birthday , stay strong , best wishes & luck to ya Dave .
animal
On 11/19/24 1:27 PM, davesmith1800 wrote:
Yesterday I turned 70
Off subject? sorry this has no off subject thread
Here what happen just this month & a little background?
?
I have not told any here 2 weeks ago I was in the emergency with 103.1° temperature. I had blood infection. ?Most that would be no big deal. Most would be no big deal.
?But in 2009 I was diagnosed with stage 4 colan cancer I was told to go the emergency over 100.5°. I want to diet to live longer so, had few of all green diet. ? So ask oncologist ?how long do people live with my diagnose she said no makes pass 10 years.?
I did ask two doctors and said samething, ?I also ask American Cancer twice they said ther stop hearing after 9 years.?
Now it is over 15 years hard for me real know how to feel or how to plan anything.
I post the diet om America Cancer?
Please post I hope helps others
[URL][/URL]
[/QUOTE]
|
Re: I MADE IT TO 70 off subject
10-4
animal
On 11/20/24 7:54 AM, mario mohl via
groups.io wrote:
toggle quoted message
Show quoted text
The only stats you can trust are the ones you falsify
yourself.
Hi.
Statistics prove that the more birthdays you have,
the longer you live. ?
|
davesmith1800
OldToolmaker