Re: Three Jaw Chuck / Spindle Bore Opening
|
You’ve missed the (short) point being made.? Again. ? Tony ? ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of davesmith1800 via groups.io
Sent: Tuesday, 26 November 2024 4:28 AM
To: [email protected]
Subject: Re: [7x12MiniLathe] Three Jaw Chuck / Spindle Bore Opening? I had turret lathes and screw machines. Everthing was short.? Most drill bit are screw machine length even upto 2?" size.? Reamers I buy long because it lower cost can cut the shank down. On Sun, Nov 24, 2024 at 10:00 PM, Tony Smith wrote: I’m pretty sure you can figure out why “short shank” would be useful. ? Tony ? ? ? What was so special about the reamer? On Sun, Nov 24, 2024 at 04:20 PM, Roy wrote: Opening the spindle bore is easy. LMS used to loan short shank reamers for that, until they didn't return. Doing it with a boring bar or adjustable reamer? is just a bit more tedious. (Did mine before the reamers vanished.)
|
