Re: HF Bandsaw Help needed [1 Attachment]
|
How exactly, step by step does one disassemble the gear box? Who knew you were supposed to check the gear box grease/oil once a year?
Now I need to replace the gears but do not knw where to begin!
Ralph
?
[Attachment(s) from mike included below]
?? evening folks . I have a HF 62377 that I bought used , I opened it
up to chek the oil & to no surprise there was none . so I dove into it &
the seal was wadded up wrapped around the shaft under the Brass gear
??? ??? on the drive wheel shaft , the manual show's different I cant
find the pic's I took with a different camera when I took it apart , so
here's a few pics of my parts & hopefully one of you pros can give e a
nudge in the right
??? ??? direction . I have the seal, shaft with a cir clip , (which
does not show in the parts list ) 2 bearings , 1 what looks like a
spacer for between the bearings or between 1 bearing & the seal ? & a
spacer t. I'm pretty sure that
??? ??? these parts all came out of the? machined cavity (that the
bearings & seal fit into ) between the retainer with the 3 screws & the
bronze or brass gear on the driven shaft in the gear box , I'm just
uncertain of the
??? ??? order they go
??? ??? tks
??? ??? animal
|
