??? ??? tks JV , mine in one of the new reddish color they are
using these days .? I did go by the store today when I was in town
& it looks like the small bushing is between the drive wheel
& the retainer , to me it looks
??? ??? like that put's the wheel's out of skew (sp) if that
make's any sense , can anyone confirm where the small spacer go's?
I must have DL'd 10 or so manuals yesterday & still I'm no
closer other than less ink
??? ??? tks
??? ??? animal
??? ???
toggle quoted message
Show quoted text
?
Is yours the HF with the bolt-on gearbox or is it cast
into the sawframe?
The Files section has a manual for a HF37151 with
bolt-on gearbox, which has a shaft with a circlip on it.
The parts list is crudely drawn but seems to show the
oil seal on the outside , then 2 bearings then the
circlip.? Then there's a 'pin' which you don't show (but
might be a key) since the next part is the brass gear.?
The following site shows dismantling and rebuilding of
a bolt on HF gearbox:?.?
Doesn't go into the output side of the gearbox, but you
might appeal to the site owner for any extra info he might
have.
Rgds - jv
