Dennis- I got it working with the help from Paul.? He notice that
I had the so2r box talking to itself and N1MM talking to itself.?
I just had to change to com ports up so that they would talk to
each other.? Now it works as it should.? Thanks for the help.?
What you mentioned got me to thinking that maybe I had them setup
wrong and Paul confirmed it.?
Ge and Thanks
John-K5RM
On 4/21/2024 8:10 PM, John McBee via
groups.io wrote:
toggle quoted message
Show quoted text
Dennis- I could have them setup wrong in the so2r box and
N1MM.? Attached is a pic of what my VSP manager shows them as.
John
On 4/21/2024 8:02 PM, John McBee via
groups.io wrote:
Dennis- Yes they are paired.? If I open up VSP manager it
also shows them paired.? I was using these ports for so2r mini
and they worked fine with it.
John
On 4/21/2024 6:28 PM, Dennis W1UE
via groups.io wrote:
John
U didn’t say or show this so I’ll ask- have u
checked device manager to verify comports are there?? And
are 21/23 and 22/24 paired?
Dennis W1UE
I
have bought a YCCC so2r+ controller.? I'm having trouble
getting it to work with N1MM or DXLog.? I have made 2
sets of virtual com ports-(which I've used with my YCCC
so2r mini), but I can't seem to get either logging
program to key the rigs or move audio from one rig to
the other.? The controller is detected in the so2r
program.? In the so2r utility program, the audio can be
switched and the xmit options will key the rigs and send
cw or tune the rigs.? So that tells me the so2r box is
working correctly or at least I think it is.? I have
also updated the firmware today in the so2r box to the
latest.??
In M1MM I'm using com 21 for keying and com 22 for
OTRSP.? In the so2r program I'm using com 23 for keying
and 24 for OTSRP.??
Is there any setup help online which will guide me
through the right setting?? I've looked around and
thought I had found some by W1UE but haven't come back
across the page again.
?I am attaching pics of my setting for the controller
and N!MM.
Thanks for any suggestions.
John K5RM
