开云体育

YCCC SO2R+ setup for N1MM and DXLog

John McBee All Messages By This Member #60 I have bought a YCCC so2r+ controller.? I'm having trouble getting it to work with N1MM or DXLog.? I have made 2 sets of virtual com ports-(which I've used with my YCCC so2r mini), but I can't seem to get either logging program to key the rigs or move audio from one rig to the other.? The controller is detected in the so2r program.? In the so2r utility program, the audio can be switched and the xmit options will key the rigs and send cw or tune the rigs.? So that tells me the so2r box is working correctly or at least I think it is.? I have also updated the firmware today in the so2r box to the latest.?? In M1MM I'm using com 21 for keying and com 22 for OTRSP.? In the so2r program I'm using com 23 for keying and 24 for OTSRP.?? Is there any setup help online which will guide me through the right setting?? I've looked around and thought I had found some by W1UE but haven't come back across the page again. ?I am attaching pics of my setting for the controller and N!MM. Thanks for any suggestions. John K5RM so2r-1.PNG so2r-2.PNG so2r-3.PNG
Dennis W1UE All Messages By This Member #61 John U didn’t say or show this so I’ll ask- have u checked device manager to verify comports are there?? And are 21/23 and 22/24 paired? Dennis W1UE toggle quoted message Show quoted text On Sun, Apr 21, 2024 at 18:07 John McBee via <mcbee.john=[email protected]> wrote: I have bought a YCCC so2r+ controller.? I'm having trouble getting it to work with N1MM or DXLog.? I have made 2 sets of virtual com ports-(which I've used with my YCCC so2r mini), but I can't seem to get either logging program to key the rigs or move audio from one rig to the other.? The controller is detected in the so2r program.? In the so2r utility program, the audio can be switched and the xmit options will key the rigs and send cw or tune the rigs.? So that tells me the so2r box is working correctly or at least I think it is.? I have also updated the firmware today in the so2r box to the latest.?? In M1MM I'm using com 21 for keying and com 22 for OTRSP.? In the so2r program I'm using com 23 for keying and 24 for OTSRP.?? Is there any setup help online which will guide me through the right setting?? I've looked around and thought I had found some by W1UE but haven't come back across the page again. ?I am attaching pics of my setting for the controller and N!MM. Thanks for any suggestions. John K5RM
John McBee All Messages By This Member #62 开云体育 Dennis- Yes they are paired.? If I open up VSP manager it also shows them paired.? I was using these ports for so2r mini and they worked fine with it. John On 4/21/2024 6:28 PM, Dennis W1UE via groups.io wrote: toggle quoted message Show quoted text John U didn’t say or show this so I’ll ask- have u checked device manager to verify comports are there?? And are 21/23 and 22/24 paired? Dennis W1UE On Sun, Apr 21, 2024 at 18:07 John McBee via <mcbee.john=[email protected]> wrote: I have bought a YCCC so2r+ controller.? I'm having trouble getting it to work with N1MM or DXLog.? I have made 2 sets of virtual com ports-(which I've used with my YCCC so2r mini), but I can't seem to get either logging program to key the rigs or move audio from one rig to the other.? The controller is detected in the so2r program.? In the so2r utility program, the audio can be switched and the xmit options will key the rigs and send cw or tune the rigs.? So that tells me the so2r box is working correctly or at least I think it is.? I have also updated the firmware today in the so2r box to the latest.?? In M1MM I'm using com 21 for keying and com 22 for OTRSP.? In the so2r program I'm using com 23 for keying and 24 for OTSRP.?? Is there any setup help online which will guide me through the right setting?? I've looked around and thought I had found some by W1UE but haven't come back across the page again. ?I am attaching pics of my setting for the controller and N!MM. Thanks for any suggestions. John K5RM
John McBee All Messages By This Member #63 开云体育 Dennis- I could have them setup wrong in the so2r box and N1MM.? Attached is a pic of what my VSP manager shows them as. John On 4/21/2024 8:02 PM, John McBee via groups.io wrote: toggle quoted message Show quoted text Dennis- Yes they are paired.? If I open up VSP manager it also shows them paired.? I was using these ports for so2r mini and they worked fine with it. John On 4/21/2024 6:28 PM, Dennis W1UE via groups.io wrote: John U didn’t say or show this so I’ll ask- have u checked device manager to verify comports are there?? And are 21/23 and 22/24 paired? Dennis W1UE On Sun, Apr 21, 2024 at 18:07 John McBee via <mcbee.john=[email protected]> wrote: I have bought a YCCC so2r+ controller.? I'm having trouble getting it to work with N1MM or DXLog.? I have made 2 sets of virtual com ports-(which I've used with my YCCC so2r mini), but I can't seem to get either logging program to key the rigs or move audio from one rig to the other.? The controller is detected in the so2r program.? In the so2r utility program, the audio can be switched and the xmit options will key the rigs and send cw or tune the rigs.? So that tells me the so2r box is working correctly or at least I think it is.? I have also updated the firmware today in the so2r box to the latest.?? In M1MM I'm using com 21 for keying and com 22 for OTRSP.? In the so2r program I'm using com 23 for keying and 24 for OTSRP.?? Is there any setup help online which will guide me through the right setting?? I've looked around and thought I had found some by W1UE but haven't come back across the page again. ?I am attaching pics of my setting for the controller and N!MM. Thanks for any suggestions. John K5RM so2r box 1.PNG
John McBee All Messages By This Member #64 开云体育 Dennis- I got it working with the help from Paul.? He notice that I had the so2r box talking to itself and N1MM talking to itself.? I just had to change to com ports up so that they would talk to each other.? Now it works as it should.? Thanks for the help.? What you mentioned got me to thinking that maybe I had them setup wrong and Paul confirmed it.? Ge and Thanks John-K5RM On 4/21/2024 8:10 PM, John McBee via groups.io wrote: toggle quoted message Show quoted text Dennis- I could have them setup wrong in the so2r box and N1MM.? Attached is a pic of what my VSP manager shows them as. John On 4/21/2024 8:02 PM, John McBee via groups.io wrote: Dennis- Yes they are paired.? If I open up VSP manager it also shows them paired.? I was using these ports for so2r mini and they worked fine with it. John On 4/21/2024 6:28 PM, Dennis W1UE via groups.io wrote: John U didn’t say or show this so I’ll ask- have u checked device manager to verify comports are there?? And are 21/23 and 22/24 paired? Dennis W1UE On Sun, Apr 21, 2024 at 18:07 John McBee via <mcbee.john=[email protected]> wrote: I have bought a YCCC so2r+ controller.? I'm having trouble getting it to work with N1MM or DXLog.? I have made 2 sets of virtual com ports-(which I've used with my YCCC so2r mini), but I can't seem to get either logging program to key the rigs or move audio from one rig to the other.? The controller is detected in the so2r program.? In the so2r utility program, the audio can be switched and the xmit options will key the rigs and send cw or tune the rigs.? So that tells me the so2r box is working correctly or at least I think it is.? I have also updated the firmware today in the so2r box to the latest.?? In M1MM I'm using com 21 for keying and com 22 for OTRSP.? In the so2r program I'm using com 23 for keying and 24 for OTSRP.?? Is there any setup help online which will guide me through the right setting?? I've looked around and thought I had found some by W1UE but haven't come back across the page again. ?I am attaching pics of my setting for the controller and N!MM. Thanks for any suggestions. John K5RM

Previous Topic Next Topic