This group is for the YCCC SO2R Box.? The SO2R Mini group is SO2RMini.
The SO2R Mini does not speak the OTRSP protocol.? On Windows there is a program which communicates via OTRSP and talks to the Mini using the commands which are an extension to the WinKey protocol.
On Mon, Jan 27, 2025 at 8:37?PM Steve Meuse via <smeuse=[email protected]> wrote:
I'm making the move (back) to a linux desktop after many years away. I've got solutions for many of my issues but finding a way to control my SO2R mini is one of the remaining tasks.?
?
I've looked at the OTRSP command set and it seems simple enough, but I'm not having any luck getting the commands to the box. If I need to send something like "RX1" to the device, is that expected to be ASCII or Hex encoded??
?
I've attempted to just echo some commands to the serial device with no luck. Bringing up a terminal program attached to the port at n81 9600 baud doesn't do anything either.? I know I have the correct port from the output of dmesg and watching the connect/disconnect messages.?
?
Any input would be appreciated!?
?
My ultimate goal was to get it working with my elgato streamdeck, which should be simple enough if I can figure out this issue.?
