开云体育

I'm making the move (back) to a linux desktop after many years away. I've got solutions for many of my issues but finding a way to control my SO2R mini is one of the remaining tasks.?

?

I've looked at the OTRSP command set and it seems simple enough, but I'm not having any luck getting the commands to the box. If I need to send something like "RX1" to the device, is that expected to be ASCII or Hex encoded??

?

I've attempted to just echo some commands to the serial device with no luck. Bringing up a terminal program attached to the port at n81 9600 baud doesn't do anything either.? I know I have the correct port from the output of dmesg and watching the connect/disconnect messages.?

?

Any input would be appreciated!?

?

My ultimate goal was to get it working with my elgato streamdeck, which should be simple enough if I can figure out this issue.?

?

-Steve

N1JFU

?

?

?

This group is for the YCCC SO2R Box.? The SO2R Mini group is SO2RMini.

The SO2R Mini does not speak the OTRSP protocol.? On Windows there is a program which communicates via OTRSP and talks to the Mini using the commands which are an extension to the WinKey protocol.

??? Paul, K1XM

On Mon, Jan 27, 2025 at 8:37?PM Steve Meuse via <smeuse=[email protected]> wrote:

I'm making the move (back) to a linux desktop after many years away. I've got solutions for many of my issues but finding a way to control my SO2R mini is one of the remaining tasks.?

?

I've looked at the OTRSP command set and it seems simple enough, but I'm not having any luck getting the commands to the box. If I need to send something like "RX1" to the device, is that expected to be ASCII or Hex encoded??

?

I've attempted to just echo some commands to the serial device with no luck. Bringing up a terminal program attached to the port at n81 9600 baud doesn't do anything either.? I know I have the correct port from the output of dmesg and watching the connect/disconnect messages.?

?

Any input would be appreciated!?

?

My ultimate goal was to get it working with my elgato streamdeck, which should be simple enough if I can figure out this issue.?

?

-Steve

N1JFU

?

?

?