开云体育

I have the rank "11" chips that were the most stable/least amount of tuning drift. I can include the diode if you like... Doug synthparts.com

that's good... then I 'd first do a swap from another voice of your synth, since you already have confirmation of those that still work.Then, you'll know if buying another chip will for sure fix

I did the sensory checks, lol , no unusual smells, nothing hot compared to adjacent boards no visible broken or burned traces , mad about my gaff with the one chip from my spare cards though, and I

would your vco chip be the more stable version or the original? I had to add a diode for the newer IG00153 vco chips when I upgraded all 16 m boards... can the older be dropped in (I have 2 spare

Since you say it affects the other banks voice, that is NOT a recommended, safe method.?You risk doing some degree of damage. Granted, you could get lucky, but..... blind chip swapping isn't the

My guess would be you killed the IG00153 VCO chip. Try swapping it to another voice to confirm. I have the chip in stock if you need another one. Doug synthparts.com

Hi to Laurie laurie, ?I have a way to check voice cards , as well as the propietary chips without allowing excess current to pass through anything.It's just an idea, but if you wanted to send a card

I have an issue with my CS80.... I did a upgrade to the newer VCO chips about 20 years ago... and ordered 2 M boards from overseas with what I believe is the original Chips.... I remember having to

Hi all. I know the group has been pretty sleepy lately. I'm not worried since everyone is busy and activity always waxes and wanes. I hope to be posting a lot soon. I've had a rough last few

Hi Florian, Aha, I see, sorry - I thought you were referring to pitch adjustment when you said tuning. Agreed, for envelope time adjustment my method would be of no use. But how about simply

Hello Mattias my request is not about unisono because of its sound. I'd need it for the adjustment procedure. I would add a switch to the gate lines, so I could deactivate all voices but one (or

Just set the envelopes to a long release time, and press the same key 4 times. The CS voice allocation picks new voices each time, an the tails of your four voices will overlap. :-) /mr

While restoring this CS50 I thought, that a mono-unisono mode would be very helpful for tuning. So I am looking for a description of that modification (especially for a CS50). I've searched the groups

Hello Rob The group settings seem to forbid attachments. You may either upload the picture to the photo section or send it me. I think I can identify them, as I restored two CS60 and a CS80

Hmm filter removed my pic, well heres a link to the pic: http://postimg.org/image/xgxdykg7t/ Cheers

Hey group, Ive dug up some bolts that i think are from the cs60? (hold the top lid down and screw in from the bottom) I didnt want to send them out if they are wrong, can anyone check see attached

Hi Florian, Sorry i havent forgotten about this, im sure i have these and you can have them free of charge, just cover the postage. I just need to go dig them out! Cheers, Rob.

Actually, I sent Kent proof of that privately, because I would want to know that if someone had beengetting that much from something I had built. It is in fact, a fact that it goes for 850GBP on that

possibly a mistake, too. but it WAS in print so I didn't investigate. Very likely indeed as RL music does seem to like inflated figures :) Phil [yamahacs80] <yamahacs80@...> wrote:

Kent, I will take that statement out of the e-bay listing. I don't want to mislead anyone.Thanks for calling my attention to this.?Tim?