Re: ERROR MESSAGE ON MY FT-920
Christopher,
You get your radio back to default parameters. Maybe there is a setting that you made and forgot which one is.
Let me know if solved with that step
73’s de Enzo IK8OZV
Inviato da iPhone
toggle quoted message
Show quoted text
Il giorno 16 nov 2022, alle ore 22:56, Christopher Ryan <TACTICAL.RADIO.GEAR@...> ha scritto:
What does a Full-Reset ential? Thank you for your time.
Christopher
|
Re: ERROR MESSAGE ON MY FT-920
Vincenzo,What? does a Full-Reset ential? Thank you for your time. Christopher
On Wed, Nov 16, 2022 at 1:12 PM Vincenzo Mone < vimone@...> wrote: Christopher, Apologies for the stupid question. Have you tried to do a full reset of the radio? If not try.
73’s de Enzo IK8OZV? Inviato da iPhone ?
Vincenzo,The ERROR msg, has nothing assigned to it. Just ERROR pops up in the display? This only occurs on transmit; CW/SSB both modes come up with the ERROR in the display. Kind regards, Christopher
|
Re: ERROR MESSAGE ON MY FT-920
Christopher, Apologies for the stupid question. Have you tried to do a full reset of the radio? If not try.
73’s de Enzo IK8OZV? Inviato da iPhone
toggle quoted message
Show quoted text
Il giorno 16 nov 2022, alle ore 21:17, Christopher Ryan <TACTICAL.RADIO.GEAR@...> ha scritto:
?
Vincenzo,The ERROR msg, has nothing assigned to it. Just ERROR pops up in the display? This only occurs on transmit; CW/SSB both modes come up with the ERROR in the display. Kind regards, Christopher
|
Re: ERROR MESSAGE ON MY FT-920
Mine does that in AM mode because I don't have that filter installed. Regards,
Steve
KA8HKC
My FT-920 displays an ERROR message whenever the mic or key is activated?
I cannot find anything in the instruction manual that address this message?
Christopher
|
Re: ERROR MESSAGE ON MY FT-920
Vincenzo,The ERROR msg, has nothing assigned to it. Just ERROR pops up in the display? This only occurs on transmit; CW/SSB both modes come up with the ERROR in the display. Kind regards, Christopher
|
Re: ERROR MESSAGE ON MY FT-920
Tom, Yes on the ham radio frequency(s), all bands/frequencies exhibit? the same ERROR msg. CW or SSB, both modes? Kind regards, Christopher
|
Re: ERROR MESSAGE ON MY FT-920
Which error message you get???? ? 73 de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520
????? *** ????? *?? GSM? +39 328 7110193? * ????? ???? SMS? +39 328 7110193 ?? ????? *** ? ? My FT-920 displays an ERROR message whenever the mic or key is activated?
I cannot find anything in the instruction manual that address this message?
Christopher
|
Re: ERROR MESSAGE ON MY FT-920
Hi Christopher,
I'm not near my FT-920, so I'll just toss the question out there: Are you by chance operating on an amateur radio frequency?
Tom
|
ERROR MESSAGE ON MY FT-920
My FT-920 displays an ERROR message whenever the mic or key is activated?
I cannot find anything in the instruction manual that address this message?
Christopher
|
I acquired an Astatic D-104 mic with the T-UP9 base. I wired it up to an eight pin mic connector per the Astatic website directions, however the mic drive is very sensitive. When I apply a little drive, the ALC is over driven. I have to set the drive nearly fully counterclockwise to prevent over driving the mic. If I sneak the drive up slightly, I over drive it. I soldered a 47ohm 1/2 watt resistor on the white audio wire, hoping that would fix the issue, but that didn't help. The mic drive is still nearly fully counterclockwise. I realize the Astatic is a high impedance mic and the '920 is designed for low impedance mics, but I know of many hams who use this mic with their modern rigs. Has anyone had a similar situation? 73, Tom, N8EUI
|
From time to time I experience power cycling on/off when transmitting using WSJT-X.? I mostly run 6 meters using FT8 & MSK441.? The transmit sequence starts fine and the things will start cycling on and off.? This happens whether the radio is hot after lots of use or cold.? I have not found a relationship to temperature.? Just as a blind shot I added ferrites to the power cable and the CAT control cable.? Wonder if anyone has had a similar experience?
|
From time to time I experience power cycling on/off when transmitting using WSJT-X.? I mostly run 6 meters using FT8 & MSK441.? The transmit sequence starts fine and the things will start cycling on and off.? This happens whether the radio is hot after lots of use or cold.? I have not found a relationship to temperature.? Just as a blind shot I added ferrites to the power cable and the CAT control cable.? Wonder if anyone has had a similar experience?
|
Re: Technician Ticket Success
Congrads! You're a General now.
Mike
|
Re: power on ft-920 problem
Could be the AF-DSP board. Had a similar problem til the DSP board completely failed. Luckily I found a parts radio and my 920 is back on the air.
Mike KA2FIR
|
Are you using VOX to key the radio instead of PTT?
Mike
|
Hi All, Please apologize for the stupid question. I own a Yaesu FT-920 and an Amplifier RM BLA-350. On the back of the Amplifier I have two RCA connectors named ALC and PTT I would like know which are the correct connections between the Amplifier and the radio. I have connected the PTT from the Amplifier to the TX GND connector of the Radio and The ALC from the Amplifier to the EXT ALC connector of the Radio. Are these connections right or not? I ask this because I am noticing that when I TX in CW the Amplifier does not stay in TX continually But it goes ON and OFF following the CW note. I have tried the to move the PTT on the back of the radio from the TX GND connector to the PTT connector But nothing changed, So I put it back into the ?TX GND connector of the radio and now the Amplifier won’t go anymore In OPERATE mode. Please any help will be really appreciated. ? ? 73 de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520
????? *** ????? *?? GSM? +39 328 7110193? * ????? ???? SMS? +39 328 7110193 ?? ????? *** ?
|
Hello Folks, I hope in an help. I am using the FT-920 with a KAM Kantronics TNC from a while for digital signals. Today I have noticed a strange behaviour, when the KAM goes in TX the radio Normally goes in TX but when it has finished TXing I see that the KAM going in RX but the radio Remains in TX until I do not or pull out the cable from the KAM, or pull out the cable from The FT-920 or just move a little bit the VFO. I have tried the to change the radio with a Kenwood TS-2000 and have noticed that I do not Get the problem. I have also noticed that if I put the RF GAIN to the minimum, the problem does not appear but As I try to increase the RF GAIN, even just a little bit. The problem appears. Please anybody can tell me what could it be and what to check. Thanks in advance for any help that will be really appreciated. ? ? 73 de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520
????? *** ????? *?? GSM? +39 328 7110193? * ????? ???? SMS? +39 328 7110193 ?? ????? *** ?
|
Re: power on ft-920 problem
hello my problem is just ignition, sometimes I turn on and the radio remains silent, no sound is heard and it does not work in transmission, I turn off and turn on and everything has been working for many years now, I never understood the problem. i did the cpu reset several times, but it always does,
Best regards
Francis
Italy ------ Messaggio originale ------
Inviato: 15/04/2022 20:51:35
Oggetto: Re: [yaesuft920] power on ft-920 problem
Francesco, and the group -? I also have a strange action when I turn on my FT-920.? More times than not, the frequency display will just flash on and off. But I have also had it come on normally with no audio out. Upon doing a mid-level reset (losing all memories?stored) it will respond normally. However, I have used both the standard Yaesu mic and a Heil GM-5 and have gotten reports of distorted audio?with both, that comes and goes.? Any ideas for Francesco or me...please?? Thanks all...and thanks to the group controllers.
Bernie in North Dakota
WD0GMD
Hi I have a problem on the ft-920 sometimes when I turn on the radio, it is silent without sound, turned off and turning back again and everything comes back to normal where it could be the problem
Best regards
Francis
Italy
|
Re: power on ft-920 problem
Francesco, and the group -? I also have a strange action when I turn on my FT-920.? More times than not, the frequency display will just flash on and off. But I have also had it come on normally with no audio out. Upon doing a mid-level reset (losing all memories?stored) it will respond normally. However, I have used both the standard Yaesu mic and a Heil GM-5 and have gotten reports of distorted audio?with both, that comes and goes.? Any ideas for Francesco or me...please?? Thanks all...and thanks to the group controllers.
Bernie in North Dakota
WD0GMD
Hi I have a problem on the ft-920 sometimes when I turn on the radio, it is silent without sound, turned off and turning back again and everything comes back to normal where it could be the problem
Best regards
Francis
Italy
|
Hi I have a problem on the ft-920 sometimes when I turn on the radio, it is silent without sound, turned off and turning back again and everything comes back to normal where it could be the problem
Best regards
Francis
Italy
|
Christopher Ryan