It's a JA or EU? market control board. You can use it, but you'll need to reprogram it with the NA TX partition table, then do your hardware mods.
Jim WA9Z
?
|
Hi group, I have a problem trying to expand the bands on one 920 rig which had its mainboard replaced but I can't do it. First of all, the mainboard doesn't have the green cable that should be cut between q2510 and r2544 I've marked the space with a blue line inside the red circle. There's only one green cable further down marked with a red arrow, I've tried with this one without success cutting it and entering the code as indicated by the mods that are floating around the web, but the radio only emits one beep instead of two which indicates that the passcode was not confirmed. Is there another method or passcode number of unlocking it?
The radio set to OUTSIDE too in F33 Service menu.
?
Thanks in advance,
?
Pablo
HI8-NPM
|
FT-920 Menu Setting for WSJT-X
I had to do a master reset on my FT-920. I don't remember what the setting for menus U45 and U46. Been several years since I set the radio up. I set U45 to 0 and U46 to 1700 Hz. That is from my notes and memory. With those setting when the radio was tuned to 50313000 the display reads 50312850. Can anyone using an FT-920 please tell me what setting they are using and if there are any other changes from default they use. Thank you for any assistance.
--
Wes WA5TKU
|
Hello what is the best PC management software for the yaesu ft-920 ?
hamradio deluxe aside... e.g. ftdxrc or similar...
|
Hi, I have a problem with my tuner, the motors work perfectly but on the 12 and 17 meter bands and occasionally on the 10 meters the tuner doesn't work correctly, I've done all the resets but it doesn't work, what could it be?
Greetings
iz8jfa
?
|
FT920 no RX audio, no TX Eprom issues ??
Hi just bought a near mint FT920 from a local for ?50 gbp.
of course it'#s faulty.
so lights up, good sign..
no TX,
RX is good using a signal generator but no sound..
speak 'clicks' on switch on and beep is heard, audio IC good.
using the tuner it will try to tune and produce a solid 100w.
tuner won't stop.
done the soft reset,
hard reset.
double and triple checked all plugs, sockets and switches.
a bit of research sways towards the Eprom being corrupt ??
Any ideas ??
thanks..
|
I have a? mint? FT 920 for sale.?I am the original owner and non-smoker.? Has the custom cover--always kept covered. No mods, scratches or blemishes. For sale $725 firm. I am in Gettysburg but can deliver within 75 miles of Gettysburg, PA.? E mail with questions to? K4ZDH@....? ?Price includes a?? Yaesu YM-38?microphone.? Original box as well. We old timers like original boxes! Can send photo of microphone if requested. Photos attached. 73
?
?
|
Hi all, I'm setting up a FT-920 for FT8 and data signals etc, but just wondering if the 5 pin DIN plug is it a standard DIN plug or mini DIN plug?
Thanks
Robbie ZL3OBI
|
Re: ft 920 nothing being recieved on antenna b and dvr not transmitting recorded message
Right sorted out the the playback issue on the DVR, it was just me holding the play button in to long, sending it into monitor mode not play mode
|
ft 920 nothing being recieved on antenna b and dvr not transmitting recorded message
Hi to all I have just purchased a FT 920, After recording the 4 messages on the DVR it plays back and is audible, but does not go into transmit mode, Also antenna B is like their is no antenna plugged in, Antenna? A works fine, I have done factory reset and full reset removing the underside panel, Any ideas.
kind regards
Vinny
M0TAV
|
Re: Issue with Shuttle Jog
Thanks Gene, please can you tell me how to do to clean it or if there is any tutorial on the net? Thanks ? 73 de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520
????? *** ????? *?? GSM? +39 328 7110193? * ????? ???? SMS? +39 328 7110193 ?? ????? *** ? ? Sorry I didn't read it correctly sounds like it has a dirty tuning pot I actually have a complete 920 for parts it has a bad main board I am fixing to list all the parts? ?
toggle quoted message
Show quoted text
On Sun, Dec 31, 2023, 12:41 PM Vincenzo Mone < vimone@...> wrote: Gene, thanks for your reply but you did not answer about my issue. Please read careful Thanks ? ? 73 de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520
????? *** ????? *?? GSM? +39 328 7110193? * ????? ???? SMS? +39 328 7110193 ?? ????? *** ? ? If you turn it all the way either way it will tune rapidly if you turn it slightly it will tune slower hope this helps this is what mine does anyway? ? On Sun, Dec 31, 2023, 12:07 PM Vincenzo Mone <vimone@...> wrote: Hello to All, HNY to everyone. Please I have an issues with my Yaesu FT-920. If I try to decrease the VFO using the Shuttle Jog ( I mean the inner VFO knob ), the frequency instead to Decrease it increase. I notice if I push the JOG to the left quickly to the end so the issue appears, Viceversa if I just push just a little to the left it decrease correctly and then I can continue to push the JOG till the end it will still work correctly. Honestly I do not know if it is a correct behaviour or it is an issue. Please if it is an issue how to solve it? Thanks for any help that will be really appreciated. ? 73 de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520
????? *** ????? *?? GSM? +39 328 7110193? * ????? ???? SMS? +39 328 7110193 ?? ????? *** ?
|
Re: Issue with Shuttle Jog
Sorry I didn't read it correctly sounds like it has a dirty tuning pot I actually have a complete 920 for parts it has a bad main board I am fixing to list all the parts?
GENE MITCHELL. Kc0mqg
On Sun, Dec 31, 2023, 12:41 PM Vincenzo Mone < vimone@...> wrote: Gene, thanks for your reply but you did not answer about my issue. Please read careful Thanks ? ? 73 de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520
????? *** ????? *?? GSM? +39 328 7110193? * ????? ???? SMS? +39 328 7110193 ?? ????? *** ? ? If you turn it all the way either way it will tune rapidly if you turn it slightly it will tune slower hope this helps this is what mine does anyway? ? On Sun, Dec 31, 2023, 12:07 PM Vincenzo Mone <vimone@...> wrote: Hello to All, HNY to everyone. Please I have an issues with my Yaesu FT-920. If I try to decrease the VFO using the Shuttle Jog ( I mean the inner VFO knob ), the frequency instead to Decrease it increase. I notice if I push the JOG to the left quickly to the end so the issue appears, Viceversa if I just push just a little to the left it decrease correctly and then I can continue to push the JOG till the end it will still work correctly. Honestly I do not know if it is a correct behaviour or it is an issue. Please if it is an issue how to solve it? Thanks for any help that will be really appreciated. ? 73 de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520
????? *** ????? *?? GSM? +39 328 7110193? * ????? ???? SMS? +39 328 7110193 ?? ????? *** ?
|
Re: Issue with Shuttle Jog
Gene, thanks for your reply but you did not answer about my issue. Please read careful Thanks ? ? 73 de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520
????? *** ????? *?? GSM? +39 328 7110193? * ????? ???? SMS? +39 328 7110193 ?? ????? *** ? ? If you turn it all the way either way it will tune rapidly if you turn it slightly it will tune slower hope this helps this is what mine does anyway? ?
toggle quoted message
Show quoted text
On Sun, Dec 31, 2023, 12:07 PM Vincenzo Mone < vimone@...> wrote: Hello to All, HNY to everyone. Please I have an issues with my Yaesu FT-920. If I try to decrease the VFO using the Shuttle Jog ( I mean the inner VFO knob ), the frequency instead to Decrease it increase. I notice if I push the JOG to the left quickly to the end so the issue appears, Viceversa if I just push just a little to the left it decrease correctly and then I can continue to push the JOG till the end it will still work correctly. Honestly I do not know if it is a correct behaviour or it is an issue. Please if it is an issue how to solve it? Thanks for any help that will be really appreciated. ? 73 de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520
????? *** ????? *?? GSM? +39 328 7110193? * ????? ???? SMS? +39 328 7110193 ?? ????? *** ?
|
Re: Issue with Shuttle Jog
If you turn it all the way either way it will tune rapidly if you turn it slightly it will tune slower hope this helps this is what mine does anyway?
GENE MITCHELL. Kc0mqg
On Sun, Dec 31, 2023, 12:07 PM Vincenzo Mone < vimone@...> wrote: Hello to All, HNY to everyone. Please I have an issues with my Yaesu FT-920. If I try to decrease the VFO using the Shuttle Jog ( I mean the inner VFO knob ), the frequency instead to Decrease it increase. I notice if I push the JOG to the left quickly to the end so the issue appears, Viceversa if I just push just a little to the left it decrease correctly and then I can continue to push the JOG till the end it will still work correctly. Honestly I do not know if it is a correct behaviour or it is an issue. Please if it is an issue how to solve it? Thanks for any help that will be really appreciated. ? 73 de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520
????? *** ????? *?? GSM? +39 328 7110193? * ????? ???? SMS? +39 328 7110193 ?? ????? *** ?
|
Hello to All, HNY to everyone. Please I have an issues with my Yaesu FT-920. If I try to decrease the VFO using the Shuttle Jog ( I mean the inner VFO knob ), the frequency instead to Decrease it increase. I notice if I push the JOG to the left quickly to the end so the issue appears, Viceversa if I just push just a little to the left it decrease correctly and then I can continue to push the JOG till the end it will still work correctly. Honestly I do not know if it is a correct behaviour or it is an issue. Please if it is an issue how to solve it? Thanks for any help that will be really appreciated. ? 73 de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520
????? *** ????? *?? GSM? +39 328 7110193? * ????? ???? SMS? +39 328 7110193 ?? ????? *** ?
|
SDR panadpter and receive antenna
Hi all, im wanting to know if it's possible to use my ham antenna as a sdr receive antenna and also if i can connect the same antenna to my yaesu frg7
Am i right in thinking that there is no antenna output on the back of the FT920 only receive in?
I know that i can get a addon board the iface2 that taps the if output from the 920 to feed a sdr which is fine, but is there a way to feed the frg7 safely without damaging it while transmitting?
Thanks
Robbie
|
Splitting Ext output Speaker btw Speaker and Headphones
Hi
I am trying to use the external output for speaker (rear) to pass the output signal through an AUTEK QF-1 Audio Filter and then split the output signal either to an external speaker or a headphones.
The signal is fine for external speaker but not the headphones, reading over there I found that I should use like an attenuator for the headphones (my HS-5 Kenwood 8 ohms), a voltage divider, is that correct? but if both have the same impedance how to keep both and reduce the voltage for headphones? a bit confused, sorry
Thanks
73S Juan, EA5XQ
|
Re: 13,5 V RCA rear connection fuse
Well the hunt is over.? After numerous returns to scour the board for Q2037 I found it.? It is located right in front of the rear key jack and the Pdl-Key switch.? Looks like it is a through board item but the Main board would have to be removed to replace it.? Might be a good time, for now, to use a wall wart to power the ARB-704 and save replacement of Q2037 to a time when and if the main board needs to come out.
Has anyone ever replaced Q2037 and am I correct that it is a through board soldered item and that the main board has to come out.? I did try to gently pull on it with tweezers but it was obvious that it was not some simple push in item. .
73 Harrison N1FAM
|
13,5 V RCA rear connection fuse
I was going to use the 13.5V output (J2001) from the back of the 920 to power an Ameritron ARB-704 amplifier/radio interface.? I have no power at jack J2001.? The Op manual says the connection is fused.? Looking at the schamatic the fuse is identified more like a switch symbol than a fuse symbol as Q2037 ICP-F10.
With the bottom cover off I see no obvious fuse.? Where is the fuse for the J2001 13.5V jack?? I hope and figure Yaesu was smart enough not to bury the fuse deep in the build.
Can anyone point me to the fuse?? Thank you
73 Harrison N1FAM
|
My FTdx-3000 has the blinking transmit light issue.? I have factory reset the radio several times, left it unplugged for days, disconnected everything to insure some external source was not keying the radio, etc .? Nothing seemed to restore it and clear the blinking transmit light.? I am ready to throw in the towel and send it off to repair.? I am located in New England (Connecticut).? Are my only options Spring Hill, FL or Cypress, CA?? Shipping is a bear.? I would really like to find a location closer to me and better yet one I could drive to and drop the unit off for repair.? Any suggestions?
73, Harrison N1FAM
|
Mark
Gene Allen Mitchell Kc0mqg