开云体育

I’ve been following this topic with interest as I have been using APRS since it started in ‘92 and downloaded it from BBS’s! It sounds to me that Bob Bruninga’s original APRS would suit your

I’ve been following this topic with interest as I have been using APRS since it started in ‘92 and downloaded it from BBS’s! It sounds to me that Bob Bruninga’s original APRS would suit your

This is an interesting idea. To me, the MicE status has always been a useless piece of information *because* it was too difficult to change the status and most (all but DOS APRS?) clients don't

Okay, I am new to this. I am happy you have $600 for a new radio for APRS, I do not. To begin with, I have to use existing or low cost equipment. For my desired purpose, I am using equipment dedicated

-‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ Yep, that worked! *sigh* Thanks!

I'll second the vote for a smaller footprint display, if it's possible. In my case, I have the Pi hooked into my car's in-dash unit (back-up camera port), which has a VGA display resolution. Mostly

You need to press the Enter key after changing the supplemental Tx I-gate filter. That will cause the new expression (which can be a zero-length string) to be applied. Sent from my Verizon 4G LTE

I believe you misunderstood the intent. Perhaps you only read the first sentence and did not read and comprehend the full message thread for context. The meaning was, it is too bad the only way to

-‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ Ahh, yes, this worked well. I had specified a VHF frequency but setting it to 0 cleared it. I'm having a similar problem the Supplemental

Hmm, maybe I'm missing the point too - of WA7SKG's complaint. I have been using APRS or nearly 20 years, fixed station and mobile. Most of the time mobile I have been satisfied with the non-graphic

Let me clarify. YAAC's screens were designed for a conventional laptop PC, with minimally 1024x768 pixels to work with. They weren't designed for low-resolution screens, because it's too hard to draw

Michael, Andrew said menu choices will get you where you want to go on your smaller screen. Then you say too bad? Did I misunderstand

That is too bad. Perhaps I am misinformed or have misunderstood, but I thought the whole purpose of APRS was to cater to the mobile user to provide a quick and easy method of reporting position,

This will be used in a mobile environment. The various status reports of "off duty", "en route", "in service", "returning", "committed", "special", and others will be changed frequently throughout the

Andrew... I did a restart and didn't see anything in the startup messages or the syslog related to an exception. I really don't see any errors. It's just as if the web server isn't being enabled.

Another question. On my base configuration, at the bottom of the screen, there are three boxes, TO, VIA, and Message, followed by a SEND button. I can put in a callsign, a path, and some text, hit

In going through the configuration part of the manual, I see in the BEACON tab, there is a choice for Station Status if you are using the MicE Beacon Type. I haven't found everything yet in this

I’ll do the restart when I get home this afternoon, but I have looked at the log in the past and didn’t see any clues. I originally tried with the default port of 8008, but after that didn’t

That's odd. Do you have the mini-webserver enabled? Go to File->Configure->Expert Mode and see what port number is specified for the mini-webserver. There might be a port conflict, depending on what

Andrew, I actually am running in the GUI mode. I'm using the full desktop version of Buster which has the GUI. ?I was thinking about it a little more, and wondered if it has something to do with the