开云体育

Regarding what your station digipeats or I-gates on behalf of someone else, that's somewhat easy. Look in your log directory (as defined on the General tab of the expert-mode Configure dialog) for

While I have been using yaac (thanks Andrew!)? for a couple of years, I just set up my fixed station to digipeat (WIDE1-1, trace enabled) and serve as an i-gate (tx and rcv).? Looking at APRS.fi, it

Thanks for this James.? I think my problem lies elsewhere, if I do have a problem.? When yaac sends out my status message and weather beacons, both ultimately get to an igate as you can see in the

If you want to know what your station is doing, watch the RF network. aprs.fi relies on the APRS-IS network for all of its information. The APRS-IS network is designed to delete all of the packets

Power's back and my webserver is up again. ________________________________________ Sent: Wednesday, August 5, 2020 9:06 AM To: [email protected] Subject: [yaac-users] Hurricane Isaias took out my

Andrew I have been looking at various settings of mine and I still cannot understand why my status message beacons more often than my weather beacon.? Is there a setting that I am missing?? Look at

Greetings, all. For some reason, 20 hours after Hurricane Isaias left my area, my power went out, so the web server hosting YAAC-encoded map data is down. I'll let you all know when my power is

this is the latest Dave Garber VE3WEJ / VE3IE

Odd that you don't have a n39 subdirectory (or did you just skip mentioning it?). What are the numbers on the files in those subdirectories? They should look like W83.ways, W83.nodes, and so forth

I sent a snip of my set screen, and although not wide ( and it wont go wider) I see 83.... west and 42....north the four folders are labelled n37 n38 n40 and n41. yes there are files inside those

Hmmm... Yep, their documentation was a little misleading. The message format they send isn't what YAAC was expecting. Next build will match the example you showed me. Andrew, KA2DDO author of

This video https://www.youtube.com/watch?v=Uq09DOSM1yE shows the dialog for passwords. --Bill AA6BD

The next step is to select the area you wish to download by center position and radius (for example, 200 kilometers around your lat/lon), and click OK. Before you click OK, you can optionally use the

Pan or zoom the map a bit. It doesn't reliably recalculate the map when download is complete. Also, did you download in the correct area? There have been bug reports when people downloaded using East

ok, I have 4 subfolders in the tiles subdirectory, but still no map Dave Garber VE3WEJ / VE3IE [email protected]> wrote:

ok, if i select pre tiles, a window pops up, with info on it. what is the next step from this Dave Garber VE3WEJ / VE3IE

No, that's the one that's probably going to melt your Pi, assuming you have enough non-SD-card storage to handle the import (an SD card can't handle the number of write cycles involved in an import),

ok, YAAC installed, downloading geofabrik north america pbf file. should be done in about an hour or more hope that the right one Dave Garber VE3WEJ / VE3IE

I will install again on the Rpi3+, and advise of any errors, and I will be sure to wait the 10 minutes, at least will advise, soon Dave Garber VE3WEJ / VE3IE

Tha is what I did, except in my case I did it on a Mac. It worked without any fuss. Clark Martin KK6ISP