开云体育

Hi Andrew, I’m running Java 14 on an old Mac Pro under macOS 10.14. Whenever I move the map, or zoom the entire map blanks to white, then redraws. Is this normal behaviour? Thanks, Carl.

BTW... Take a look at weewx. It has twitter output and is (I believe) GNU public License.

I set us a test config to see if the radio port slowdown worked (#14). My -4 station, (RasPi3B+ and tnc-pi9k6, YAAC-150) talks across the room to -1 station (RasPi3B+ with TNC-pi, YAAC-148, aprs-is).

Again, question #1: are you able to transmit your own beacon? If not, then solve that problem before trying to digipeat other stations' packets.

My digipeater was working for some time. I think it quit working when I upgraded to beta150. I am not certain of that though. I have been through all the parameters and cannot see what is wrong. The

You can also read: http://aprsisce.wikidot.com/doc:qru which includes a list of recommended common groups. Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

Andrew, As someone who is new to APRS, this sort of information is very valuable. I am very impressed with the depth and breadth of YAAC. Many thanks, Jim, AG5VQ

This is independent of your earlier question about setting up a digipeater. Since you "qualify" as being in an area needing a digipeater, then go for it. I'm talking about areas like where I live

I don’t disagree with anything you say, but it doesn’t address my problem. There are sections of the county not covered by the main digi. I want to be able to track my vehicle in a particular

Greetings. After looking at yet another email about adding digipeaters, the thought came up of "What do we really need to add to APRS?" Except in certain areas, we generally have good coverage with

The first question is, are you configured for digipeating? Every station doesn't need to be a digipeater, so that functionality is off by default. So, let's troubleshoot this in order. 1. Can you

Hi Ian Is this message a reply to someone because there is no preceding post? Joe Sent from Mail for Windows 10 Sent: May 15, 2020 8:53 AM To: [email protected] Subject: [yaac-users]

My system does not digipeat. I amusing a rpi2 with a tnc2 and beta 150 (11 may 20200. I think the paths are correct .Everything else works fine. Sent from Mail for Windows 10

Andrew, The test packet file I attached was captured via: In looking at the real-time output, the only "extra" white-space I noted was that Mic-E packets seem to have two newlines after a packet.?

OK, I ran your log of the collected messages through, and found several errors in the Yaesu port driver. I have fixes for all of those issues now, so the playback appears to work. However, I'm

Andrew, Thanks for your quick response.? I've tested build #150 over the past two days and incoming packets from the FTM-400 are still not displaying on the YAAC map or registering as received

Yes, any software TNC program you want to use has to be running and available before YAAC tries to connect to it. Unlike Internet connections to APRS-IS, YAAC won't keep retrying to find the local

OK, so I am using a remote connection to a raspberry pi. So far no problem. On the other hand, to save screen, I was shrinking down the window to see around it. That was the problem as the program was

Did you start YAAC from a command prompt (as opposed to clicking on the YAAC.jar file in a graphical file manager)? If so, then YAAC should print out what it is doing to the terminal window. Capture

I followed instructions on the web page and only difference I see is that I have version 11 of java stuff. Whne I run the main program, the last few lines say something about starting, but config